A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

We report a simple and cost-effective method for fabricating integrated electronic-microfluidic devices with multilayer configurations. A CO₂ laser plotter was employed to directly write patterns on a transferred polydimethylsiloxane (PDMS) layer, which served as both a bonding and a working layer. The integration of electronics in microfluidic devices was achieved by an alignment bonding of top and bottom electrode-patterned substrates fabricated with conventional lithography, sputtering and lift-off techniques. Processes of the developed fabrication method were illustrated. Major issues associated with this method as PDMS surface treatment and characterization, thickness-control of the transferred PDMS layer, and laser parameters optimization were discussed, along with the examination and testing of bonding with two representative materials (glass and silicon). The capability of this method was further demonstrated by fabricating a microfluidic chip with sputter-coated electrodes on the top and bottom substrates. The device functioning as a microparticle focusing and trapping chip was experimentally verified. It is confirmed that the proposed method has many advantages, including simple and fast fabrication process, low cost, easy integration of electronics, strong bonding strength, chemical and biological compatibility, etc.     

Hydrolysis of titanium alkoxide and effects of hydrolytic polycondensation parameters

Titanium alkoxides hydrolyse vigorously with water producing polycondensates whose equivalent oxide content varies from 70% to over 90%. This variation reflects the average molecular size and the nature of the terminal bonds. Hydrolysis conditions also affect the molecular and particle morphologies modifying the crystallization and sintering behaviour of oxide materials derived from polycondensates. It is also possible to form clear polymer solutions under excess water hydrolysis with the addition of certain acids. Investigations show that there is a window in the acid concentration which provides long-term solution stability. The gels formed from these clear solutions shrink in their liquor under certain conditions and the introduction of hydrogen peroxide into the liquor (surrounding the gel) causes vigorous gel shrinkage.     

Features of a Scan and Clock Resource chip for providing access to board-level test functions

The architecture and some of the specific features of a Scan and Clock Resource (SCR) chip are described. This chip is currently being used in a high-end workstation product to provide access to the testability features of the individual chips and/or printed circuit boards. Using a board-level controller to gain access to the testability features of system components and interfacing the controller to a diagnostics processor (or external tester) is emerging as a common strategy for designing testable digital systems. Based upon experience gained from such an application, controller features that are deemed useful are discussed.This paper is an enhanced version of the author's earlier paper titled Towards a Standard Approach for Controlling Board-Level Test Functions, presented at the IEEE International Test Conference, ITC'90, Washington D.C., September 1990.     

Improved concentration and separation of particles in a 3D dielectrophoretic chip integrating focusing, aligning and trapping

This article presents a dielectrophoresis (DEP)-based microfluidic device with the three-dimensional (3D) microelectrode configuration for concentrating and separating particles in a continuous throughflow. The 3D electrode structure, where microelectrode array are patterned on both the top and bottom surfaces of the microchannel, is composed of three units: focusing, aligning and trapping. As particles flowing through the microfluidic channel, they are firstly focused and aligned by the funnel-shaped and parallel electrode array, respectively, before being captured at the trapping unit due to negative DEP force. For a mixture of two particle populations of different sizes or dielectric properties, with a careful selection of suspending medium and applied field, the population exhibits stronger negative DEP manipulated by the microelectrode array and, therefore, separated from the other population which is easily carried away toward the outlet due to hydrodynamic force. The functionality of the proposed microdevice was verified by concentrating different-sized polystyrene (PS) microparticles and yeast cells dynamically flowing in the microchannel. Moreover, separation based on size and dielectric properties was achieved by sorting PS microparticles, and isolating 5 μm PS particles from yeast cells, respectively. The performance of the proposed micro-concentrator and separator was also studied, including the threshold voltage at which particles begin to be trapped, variation of cell-trapping efficiency with respect to the applied voltage and flow rate, and the efficiency of separation experiments. The proposed microdevice has various advantages, including multi-functionality, improved manipulation efficiency and throughput, easy fabrication and operation, etc., which shows a great potential for biological, chemical and medical applications.     

Fabrication process of open surfaces by robotic fibre placement

Composite materials are being used extensively in many industrial sectors. They offer excellent material properties compared to other structural materials available. However, the traditional fabrication process using manual hand lay-up is time consuming and labour intensive. Therefore, robotic fibre placement has been introduced to overcome these drawbacks. This approach may greatly reduce cycle time and manufacturing costs. This paper describes the overall strategy for the establishment of a flexible robotic fibre placement technique. The fabrication process planning of this new technique is presented. Three different types of fibre placement for open surfaces are discussed. These include simulation-based fibre path generation, fibre steering, and sensory-based contour following methodologies. The system architecture for the process control is also presented.     

Effects of Penicillium roqueforti and whey cheese on gross composition,microbiology and proteolysis of mould‐ripened Civil cheese during ripening

Four different types of mould‐ripened Civil cheese were manufactured. A defined (nontoxigenic) strain of a Penicillium roqueforti (SC 509) was used as the secondary starter with and without addition of the whey cheese (Lor); in parallel, secondary starter‐free counterparts were manufactured. Chemical composition, microbiology and proteolysis were studied during the ripening. The incorporation of whey cheese in the manufacture of mould‐ripened Civil cheese altered the gross composition and adversely affected proteolysis in the cheeses. The inoculated P. roqueforti moulds appeared to grow slowly on those cheeses, and little proteolysis was evident in all cheese treatments during the first 90 days of ripening. However, sharp increases in the soluble nitrogen fractions were observed in all cheeses after 90 days. Microbiological analysis showed that the microbial counts in the cheeses were at high levels at the beginning of ripening, while their counts decreased approximately 1–2 log cfu/g towards the end of ripening.     

Mycotoxins in spices and herbs–An update

Spices and herbs have been used since ancient times as flavor and aroma enhancers, colorants, preservatives, and traditional medicines. There are more than 30 spices and herbs of global economic and culinary importance. Among the spices, black pepper, capsicums, cumin, cinnamon, nutmeg, ginger, turmeric, saffron, coriander, cloves, dill, mint, thyme, sesame seed, mustard seed, and curry powder are the most popular spices worldwide. In addition to their culinary uses, a number of functional properties of aromatic herbs and spices are also well described in the scientific literature. However, spices and herbs cultivated mainly in tropic and subtropic areas can be exposed to contamination with toxigenic fungi and subsequently mycotoxins. This review provides an overview on the mycotoxin risk in widely consumed spices and aromatic herbs.     

Chemical and microbiological status and volatile profiles of mouldy Civil cheese,a Turkish mould‐ripened variety

The objective of this study is to characterise the gross chemical and microbiological status and identify the volatile compounds of mouldy Civil cheeses. A total of forty‐one samples were surveyed, and gross compositional status of the cheeses was (as mean values): 6.5 for pH, 6.2% for fat‐in‐dry matter, 51.8% for moisture and 15.3% for water‐soluble nitrogen (as% of total nitrogen). Chemical composition of the cheese samples varied widely. Mouldy Civil cheese has similar pH values and moisture contents when compared with blue‐type cheeses, but it has distinct feature for fat contents. The microbiological counts of the samples were found to be high and some samples contained coliform bacteria. A total of 95 volatiles, including esters (28), acids (6), ketones (12), aldehydes (3), alcohols (15), terpenes (10), sulphur compounds (3) and miscellaneous (18), were identified in the volatile fractions of the cheeses, and principal volatile groups were esters, alcohols and ketones.     

Evaluation of pre-treatment processes for HRS (hot rolled steel) in powder coating

Hot rolled steel (HRS) is used extensively in the automotive, agricultural and appliance industries. The corrosive response of HRS was investigated after it had been exposed to various surface treatments, prior to powder coating. The behaviour of three conversion coatings: zinc phosphate (ZnP), iron phosphate (FeP) and zirconium (Zr)-based nano-scaled, on HRS was studied. HRS is naturally covered with iron oxide scale and this was removed from the surface by mechanical and chemical processes, prior to the application of surface treatment and organic coatings. The following tests on differently treated panels were conducted to evaluate corrosion performance: adhesion tests such as, crosshatch, pull-off, and conical bending, SEM, XPS, salt spray and electro-chemical impedance studies were also performed. Good correlations were recorded showing that zinc phosphate conversion coating gave the best performance, and zirconium-based nano-structured conversion coating, was superior to that of iron phosphate conversion coatings on HRS.