Production of hydrogen over bimetallic Pt–Ni/δ-Al2O3: I. Indirect partial oxidation of propane

Indirect partial oxidation (IPOX) of propane was studied over bimetallic 0.2 wt.% Pt–15 wt.% Ni/δ-Al₂O₃ catalyst in the 623–743 K temperature range. The unreduced and reduced forms of the catalyst were characterized by ESEM–EDAX and X-ray diffraction (XRD). In the IPOX tests, the effects of steam to carbon ratio (S/C), carbon to oxygen ratio (C/O₂) and residence time (W/F (g_cat h/mol HC)) on the hydrogen production activity, selectivity and product distribution were studied in detail. The effect of temperature program applied (increasing from 623 to 743 K, ITP; decreasing from 743 to 623 K, DTP) during reaction was also tested. The results showed that the Pt–Ni bimetallic system has superior performance characteristics compared to the monometallic catalysts reported in literature. The reason is thought to be the utilization of the catalyst particles as micro heat exchangers during IPOX; the heat generated by Pt sites during exothermic total oxidation (TOX) being readily transferred through the catalyst particles acting as micro heat exchangers to the Ni sites, which promote endothermic steam reforming (SR). The optimal conditions were found as S/C = 3, C/O₂ = 2.70 and W/F = 0.51 g_cat h/mol HC for IPOX of propane on the basis of high hydrogen productivity and selectivity between 623 and 748 K for the experimental conditions tested. The thermo-neutral points obtained showed the sustainability of reaction in terms of energy.     

KINETICS FOR LOW TEMPERATURE PYROLYSIS OF BLACK LIQUOR

A kinetic study of pyrolysis of dried black liquor was performed using a Netzsch 429 Thermogravimetric Analyzer. It was found that as conversion increases from 10 to 45% the apparent pyrolysis activation energy for black liquor increases from 77.20 to 112.74 KJ/mol. For black liquor the order of reaction was found to be first-order. The reaction rate constant was found to be 2.12×10⁹ min. These results are in agreement with the data reported by other investigators on biomass pyrolysis.     

Degradation of 4-chloro-2-methylphenol in aqueous solution by electro-Fenton and photoelectro-Fenton processes

Degradation of 4-chloro-2-methylphenol (PCOC), a refractory toxic chemical emitted to the environment from the industrial production of phenoxy herbicides was studied in aqueous solution. Electro-Fenton and photoelectro-Fenton processes were used as the degradation methods. H₂O₂, produced by the reduction of oxygen at carbon cathode reacted with dissolved metal ions to form hydroxyl radicals, which in turn reacted with PCOC sequentially to degrade the aromatic ring. The effects of using different [Fe²⁺]/[PCOC]₀ and the effect of replacing Fe²⁺ by Mn²⁺ ion have been examined. It was found that degradation rate was increased with increasing [Fe²⁺]/[PCOC]₀ ratio from 2 to 4. However, the total charge utilized during the treatment was also increased. The efficiency of PCOC degradation was observed to be higher when Mn²⁺ was used as the catalyst. The mineralization of aqueous solutions of PCOC, withdrawn from the reactor at certain time interval, has been followed by total organic carbon (TOC) decay and dechlorination. A fast and complete degradation of the aromatic ring was achieved in photoelectro-Fenton system. 41.7% TOC decay and complete dechlorination were observed by consuming only 141.4 C electrical charge during a 300 min photoelectron-Fenton treatment. In the case of electro-Fenton system, 280.7 C electrical charge was consumed during 450 min of electrolysis to attain a similar degradation of PCOC. 14.9% TOC removal and 89.3% dechlorination have been obtained in this system under the applied conditions.     

Mechanical and viscoelastic properties of polyethylene-based microfibrillated composites from 100% recycled resources

In this study, recycled polyethylene (rPE) based microfibrillated composites (MFCs) were developed while incorporating recycled poly(ethylene terephthalate) (rPET) and recycled polyamide 6 (rPA) as the reinforcing fibrillar phases at a given weight ratio of 80 wt% (rPE)/20 wt% (rPET or rPA). The blends were first melt processed using a twin-screw extruder. The extrudates were then cold stretched at a drawing ratio of 2.5 to form rPET and rPA fibrillar structures. Next, the pelletized drawn samples were injection molded at the barrel temperatures below the melting temperatures of rPET and rPA. The tensile, three-point bending, impact strength, dynamic thermomechanical, and rheological properties of the fabricated MFCs were analyzed. The effects of injection molding barrel temperature (i.e., 150°C and 190°C) and extrusion melt processing temperature (i.e., 250°C and 275°C) on the generated fibrillar structure and the resultant properties were explored. A strong correlation between the fibrillar morphology and the mechanical properties with the extrusion and injection molding temperatures was observed. Moreover, the ethylene/n-butyl acrylate/glycidyl methacrylate (EnBAGMA) terpolymer and maleic anhydride grafted PE (MAH-g-PE) were, respectively, melt processed with rPE/rPET and rPE/rPA6 blends as compatibilizers. The compatibilizers refined the fibrillar structure and remarkably influenced mechanical properties, specifically the impact strength.     

Electrically controlled release of 5-fluorouracil from conductive gelatin methacryloyl-based hydrogels

Herein, electro-responsive hydrogels were obtained by incorporation of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) into the gelatin methacryloyl (GelMA) by using photopolymerization technique. Hydrogels were characterized by FTIR and scanning electron microscopy analyses. Cytotoxicity tests were performed by L929 cell lines to determine cell compatibility. Swelling tests were conducted to investigate the water uptake capacity of hydrogels. 5-fluorouracil (5-FU) was selected as a model drug as it is known as a topical drug for some skin cancer type treatment. The release of 5-FU from the hydrogel was provided in efficient and controlled manner at simulated skin cancer (pH = 5.5) and under 0 and 1.5 V. The simulated drug delivery experiments conducted in vitro revealed that the drug releasing amount was higher when voltage is applied to the hydrogels. All results visualized that the obtained GelMA-based PEDOT/PSS hydrogels with enhanced electrical properties could be a potential candidate as an electrically sensitive drug carrier for treatment of skin cancer in the future applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46914.     

Extending the information delivery manual approach to identify information requirements for performance analysis of HVAC systems

Heating, Ventilation and Air-Conditioning (HVAC) systems account for more than 15% of the total energy consumption in the US. In order to improve the energy efficiency of HVAC systems, researchers have developed hundreds of algorithms to automatically analyze their performance. However, the complex information, such as configurations of HVAC systems, layouts and materials of building elements and dynamic data from the control systems, required by these algorithms inhibits the process of deploying them in real-world facilities. To address this challenge, we envision a framework that automatically integrates the required information items and provides them to the performance analysis algorithms for HVAC systems. This paper presents an approach to identify and document the information requirements from the publications that describe these algorithms. We extend the Information Delivery Manual (IDM) approach so that the identified information requirements can be mapped to multiple information sources that use various formats and schemas. This paper presents the extensions to the IDM approach and the results of using it to identify information requirements for performance analysis algorithms of HVAC systems.     

The electrical and dielectric characterization of the Co/ZnO-Rods/p-Si heterostructure depending on the frequency

Journal of Materials Science: Materials in Electronics - Zinc oxide (ZnO) rods film was fabricated by homemade and simple spray pyrolysis technique on a p-type silicon (Si) substrate, and the film...     

Clarification and pasteurisation effects on monomeric anthocyanins and percent polymeric colour of black carrot (Daucus carota L.) juice

Black carrots (BCs) are a rich source of stable anthocyanins (ACNs). The purpose of this study was to evaluate the effects of clarification and pasteurisation on ACNs of black carrot juice (BCJ). Monomeric ACNs, ACN profile and percent polymeric colour were determined during processing of BCJ. While depectinisation and bentonite treatments resulted in 7% and 20% increases in monomeric ACN content of BCJ, respectively, gelatine–kieselsol treatment and pasteurisation resulted in 10% and 3–16% reduction. Percent polymeric colour decreased after clarification, but substantially increased in samples subjected to heat. ACNs of BCJ samples were identified by HPLC–MS. Unclarified BCJ contained cyanidin-3-galactoside-xyloside-glucoside-ferulic acid as the major ACN, followed by cyanidin-3-galactoside-xyloside-glucoside-coumaric acid, and cyanidin-3-galactoside-xyloside-glucoside. After depectinisation, two more ACNs (cyanidin-3-galactoside-xyloside and cyanidin-3-galactoside-xyloside-glucoside-sinapic acid) were also identified. These results indicated that depectinisation and bentonite treatment had positive effect on the colour of BCJ, while gelatin–kieselsol treatment and pasteurisation had negative effect.     

Different approaches to synthesize carnosine selective imprinted polymers

Selective recognition of proteins by synthetic molecularly imprinted polymers is one of the interesting topics in biosciences. Carnosine (β-alanyl-l-histidine) and related histidine containing peptides are distributed in a wide range of tissues in vertebrate organisms. These peptides have been extensively studied because of their important physiological properties besides their metal chelation property. In this study, preparation of carnosine specific imprinted polymers (MIPs) for the recognition of imidazole containing peptides with and without copper ion is reported. Carnosine and copper–carnosine complex were employed as template molecules where 4-vinylpyridine and ethylenglycol dimethacrylate were chosen as monomer and crosslinker, respectively. The selectivity and binding studies of copper–carnosine imprinted polymer showed high selectivity toward both carnosine (template peptide) and the cupric ion. The selectivity of copper–carnosine imprinted polymer was 65% and carnosine imprinted polymer was approximately 40%. These results indicate that specific recognition of carnosine is depending on the basis of metal coordination