Inorganic–organic hybrid materials with zirconium oxoclusters as protective coatings on aluminium alloys

Inorganic–organic hybrid materials are attracting a strong scientific interest mainly for their outstanding inherent mechanical and thermal properties, which can be traced back to the intimate coupling of both inorganic and organic components. By carefully choosing the experimental parameters used for their synthesis, chemically and thermally stable acrylate-based hybrid material embedding the zirconium oxocluster Zr₄O₄(OMc)₁₂, where OMcCH₂C(CH₃)C(O)O, can be deposited as UV-cured films on aluminium alloys.

In particular, the molar ratios between the oxocluster and the monomer, the polymerisation time, the amount of photo-initiator and the deposition conditions, by using an home-made spray-coating equipment, were optimised in order to obtain the best performing layers in terms of transparency and hardness to coat aluminium alloy (AA1050, AA6060 and AA2024) sheets. Furthermore, it was also evaluated whether the hybrid coatings behave as barrier to corrosion.

Several coated samples were prepared and characterised. Environmental scanning electronic microscopy (ESEM) and scratch test were used to investigate the morphology of the films and to evaluate their scratch resistance, respectively. Electrochemical impedance spectroscopy (EIS) was performed in order to evaluate if the coatings actually protect the metallic substrate from corrosion.

In order to measure shear storage modulus (G′) and loss modulus (G″) of the materials used for coatings, bulk samples were also obtained by UV-curing of the precursors solution. Dynamical mechanical thermal analysis (DMTA) was performed in shear mode on cured disks of both the hybrid materials and pristine polymer for comparison. The values of T_g were read off as the temperatures of peak of loss modulus. The length and mass of all the samples were measured before and after the DMTA analysis, so that the shrinkage of the materials in that temperature range was exactly evaluated.     

Anisotropic mesh adaption by metric‐driven optimization

We describe a Gauss–Seidel algorithm for optimizing a three‐dimensional unstructured grid so as to conform to a given metric. The objective function for the optimization process is based on the maximum value of an elemental residual measuring the distance of any simplex in the grid to the local target metric. We analyse different possible choices for the objective function, and we highlight their relative merits and deficiencies. Alternative strategies for conducting the optimization are compared and contrasted in terms of resulting grid quality and computational costs. Numerical simulations are used for demonstrating the features of the proposed methodology, and for studying some of its characteristics. Copyright © 2004 John Wiley & Sons, Ltd.     

Response coding and visuomotor transformation in the Simon task: The role of action goals.

Manual responses can be defined by differing response parameters. Any of them may generate a Simon effect. For all those response parameters, the same implementation of the Simon effect (in terms of subserving mechanism) is assumed. In 3 experiments, subjects had to respond with either fingers or sticks. Temporal properties of the Simon effect changed with response parameters relevant in a task. The Simon effect for manual responses decayed. For stick responses, in which the action goal differed from the anatomical mapping of the acting hand, a sustained Simon effect was observed. However, if the action goal for stick responses was not instrumental for selecting the correct response, the Simon effect decayed. The findings are consistent with the notion of different mechanisms involved in generating a Simon effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

W‐band physical layer design issues in the context of the DAVID–DCE experiment

This paper aims at focusing on the aspects concerning the physical layer design for an innovative satellite communication experiment. Such an experiment, denoted by the acronym DAVID–DCE (Data and Video Interactive Distribution—Data Collection Experiment) is based on the exploitation of the W‐band (75–110 GHz) for high‐bit‐rate satellite transmission. The potential advantages of using of the W‐band are mainly related to the great bandwidth availability, and to the absence of interference. Moreover, an expected result of the experiment is a substantive improvement in the communication system's performances in the presence of meteorological phenomena (e.g. rain) as compared with the more conventional Ka‐band satellite transmission. On the other hand, problems to be faced concern the non‐ideal behaviours of hardware devices employed for high‐frequency digital transmission. In particular, carrier recovery and timing recovery are the most crucial signal‐processing tasks to be carefully considered in the design of the physical level of the system, because they considerably suffer from hardware impairments. The purpose of this work is to illustrate the proposed solutions in terms of the most critical modulation, demodulation and synchronization design issues, together with the effects of non‐ideal behaviours of hardware components on BER performances. Copyright © 2004 John Wiley & Sons, Ltd.     

The Lazy Cook Problem, or Scheduling Two Parallel Machines to Optimize Vehicle Utilization

A cook has to prepare n cakes using an oven with two racks. According to the recipe, the i-th cake has to be baked for exactly a _i minutes. Cakes to be cooked are taken from a table and carried to the oven, and once cooked are carried back to the table by means of a trolley that can carry two cakes at a time. What is the minimum number q ^* of round trips required of the cook? This problem has application to the operation scheduling of transportation systems and to material cutting. A different problem arises according to whether the cook accepts or not to stay near the oven for awhile with the trolley. If the trolley cannot be idle at the oven, an optimum schedule with no oven idle-time always exists: consequently, the trolley schedule is trivial, and the problem is transformed into a set packing. For this case, we propose and test a heuristic method which generates all of the promising columns of the set packing, and solves the resulting problem by branch-and-bound. Instead, if the trolley can be idle at the oven for a limited amount of time, a problem arises to find an optimal schedule of the trolley: in this case we show how to use a scaling technique in order to obtain a very good feasible solution by the method above.     

Influence of Carrier Mobility and Interface Trap States on the Transfer and Output Characteristics of Organic Thin Film Transistors

We have used two dimensional drift diffusion simulations to calculate the electrical properties of bottom contact pentacene based organic thin film transistor, taking into account field-dependent mobility and interface or bulk trap states. In order to derive from basic principles the transport properties of the organic semiconductor we have developed a Monte Carlo simulator to calculate the field dependent mobility. We analyzed the presence of trap states at the interface between organic material and gate insulator and we show the influence of trap states combined with the effect of field-dependent mobility on the transfer characteristic. Numerical calculations are also reported for the output characteristics of the device showing a very good agreement with the available experimental results.     

On-Line LC-GC for the Analysis of the Minor Components in Edible Oils and Fats – The Direct Method Involving Silylation

The previous on-line LC-GC method for the direct analysis of the minor components in oils and fats (without cleavage of esters) was modified: The free alcohols/sterols were silylated instead of acylated, and the LC fraction transferred to GC is widened to range from the beginning of the LC chromatogram up to the sterol esters. Silylation eliminated the problem that acylation may esterify some free alcohols with free fatty acids from the oil if the oil or fat is of high acidity. Widening of the LC fraction to include squalene and the tocopherols added information to that previously obtained.     

Elastic-viscoplastic differential equations on a manifold modelling of in-plane stretching of sheet metal

The computational method for large deformation plasticity called differential equations on a manifold (DEM) has previously been shown to be effective for axisymmetric and plane strain sheet metal forming problems. The method has now been formulated for in-plane stretching problems, incorporated into a computer code, and applied to several problems. The code's performance is robust and accurate, as evidenced by a comparison with other published results. Incorporation of an automatic mesh generator significantly reduces data preparation time.