Experience with model-based performance, reliability, and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture.     

A new approach to network heterogeneity: Polymerization induced phase separation in photo-initiated,free-radical methacrylic systems

Non-reactive, thermoplastic prepolymers (poly- methyl, ethyl and butyl methacrylate) were added to a model homopolymer matrix composed of triethylene glycol dimethacrylate (TEGDMA) to form heterogeneous networks via polymerization induced phase separation (PIPS). PIPS creates networks with distinct phase structure that can partially compensate for volumetric shrinkage during polymerization through localized internal volume expansion. This investigation utilizes purely photo-initiated, free-radical systems, broadening the scope of applications for PIPS since these processing conditions have not been studied previously.The introduction of prepolymer into TEGDMA monomer resulted in stable, homogeneous monomer formulations, most of which underwent PIPS upon photo-irradiation, creating heterogeneous networks. During polymerization the presence of prepolymer enhanced autoacceleration, allowing for a more extensive ambient cure of the material. Phase separation, as characterized by dynamic changes in sample turbidity, was monitored simultaneously with monomer conversion and either preceded or was coincident with network gelation. Dynamic mechanical analysis shows a broadening of the tan delta peak and secondary peak formation, characteristic of phase-separated materials, indicating one phase rich in prepolymer and another depleted form upon phase separation. In certain cases, PIPS leads to an enhanced physical reduction of volumetric shrinkage, which is attractive for many applications including dental composite materials.     

Ultrastructure of oocytes of the Urostreptus atrobrunneus (Diplopoda,Spirostreptida, Spirostreptidae): A potential urban centers plague

The knowledge of the process of egg formation is indispensable for understanding the mechanisms involved in the reproduction of different species. In this context, the objective of this work was to describe the ultrastructure of the oocytes of Urostreptus atrobrunneus (Spirostreptida), a potential plague of urban centers in different locations of São Paulo State. The lack of knowledge about the morphology, physiology, and the reproductive behavior of the species have hindered an effective control of it. The oocytes of U. atrobrunneus presented three development stages: young oocyte or type I; intermediary oocyte or type II; and mature oocyte or type III. During the oocyte development, the cytoplasm become filled with several globules of protein, drops of lipids, and sphaerocrystals, and it was not observed in many organelles in the oocytes with exception of mitochondria, abundant, principally in young oocytes. The vitelline membrane is also deposited in a discontinuous form and the chorion does not present differentiation of layers. The follicular epithelium alters its shape according to the development phase of the oocyte. Part of the vitellus is from exogenous origin and part is endogenous. Before this, only two studies about the ultrastructural analysis of the female germ cells of diplopods were published. Microsc. Res. Tech. © 2012 Wiley Periodicals, Inc.     

Resveratrol Prevents Cytoarchitectural and Interneuronal Alterations in the Valproic Acid Rat Model of Autism

Autism spectrum disorder (ASD) is a prevalent neurodevelopmental disorder characterized by several alterations, including disorganized brain cytoarchitecture and excitatory/inhibitory (E/I) imbalance. We aimed to analyze aspects associated with the inhibitory components in ASD, using bioinformatics to develop notions about embryonic life and tissue analysis for postnatal life. We analyzed microarray and RNAseq datasets of embryos from different ASD models, demonstrating that regions involved in neuronal development are affected. We evaluated the effect of prenatal treatment with resveratrol (RSV) on the neuronal organization and quantity of parvalbumin-positive (PV+), somatostatin-positive (SOM+), and calbindin-positive (CB+) GABAergic interneurons, besides the levels of synaptic proteins and GABA receptors in the medial prefrontal cortex (mPFC) and hippocampus (HC) of the ASD model induced by valproic acid (VPA). VPA increased the total number of neurons in the mPFC, while it reduced the number of SOM+ neurons, as well as the proportion of SOM+, PV+, and CB+ neurons (subregion-specific manner), with preventive effects of RSV. In summary, metabolic alterations or gene expression impairments could be induced by VPA, leading to extensive damage in the late developmental stages. By contrast, due to its antioxidant, neuroprotective, and opposite action on histone properties, RSV may avoid damages induced by VPA.     

Use of native species Crenicichla menezesi (Ariidae) as a model for in situ evaluation of genotoxicity in surface water

The aim of this work was to analyze the genotoxicity in surface water from the Pitimbú River (Natal, Brazil) using a neotropical species Crenicichla menezesi as bioindicator for in situ evaluation. The genotoxicity was analyzed using the micronucleus (MN) and comet assays in erythrocytes. The animals were collected from five sites of the river. A significant increase of MN frequency and comet class L1 to L4 were observed only in specimens collected from three sampling sites (SS3, SS4 and SS5) located into urban areas. These same sites also presented high metals concentration. Correlation of DNA damage and concentrations of Cu (Spearman r = 0.8080), Cr (Spearman r = 0.9772), and Ni (Spearman r = 0.9909) were observed. These data indicate the presence of genotoxic agents. Moreover the C. menezesi species showed to be a good indicator for prompt analyses since this species presents sedentary and carnivore habits.     

Stagnant Effective Thermal Conductivity of Agro-Industrial Residues for Solid-State Fermentation

The stagnant effective thermal conductivities (K₀) of sugar cane bagasse (SCB), wheat bran (WB), orange pulp and peel (OPP) and their combination (weight proportion 1:2:2 SCB/OPP/WB) were obtained using the line heat source method. These solid materials were applied to pectinase production via solid-state fermentation. The moisture content ranged from 4 to 80% (w.b.). A conduction mechanism through the porous media was observed, along with conduction through a liquid film and contact thermal resistance between the samples and the probe. K₀ was low for intermediate moisture contents and approached the molecular conductivity of water for high moisture contents.     

Impact of thiourethane filler surface functionalization on composite properties

Thiourethane oligomers added to methacrylate matrices improve fracture toughness and reduce polymerization stress. In this study, the oligomers are added to the surface of inorganic fillers in the formulation of resin composites. Systematically varied fillers treated either with the thiourethane or a methacrylate silane control are tested. Thiourethane reduces the rate of polymerization of light-cured composites but does not affect the final degree of conversion. Filler functionalization with thiourethane increases the depth of polymerization, in filler type-dependent fashion. Thiourethane reduces the polymerization stress for all fillers. The findings suggest that this approach results in the same general effects with the addition of thiourethanes directly to the matrix. This is accomplished with a lower overall concentration of thiourethane, and with no prejudice to the handling characteristics of the material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47687.     

Surface morphology of Diplodon expansus (Küster, 1856; Mollusca, Bivalvia, Hyriidae) gill filaments after exposure to environmentally relevant concentrations of atrazine herbicide

Brazilian endemic species Diplodon expansus (Küster, 1856) is found in freshwater bodies in the country's southeast, in large anthropogenic influence regions especially with an extensive agriculture emphasis. One of the main pesticides used in the species occurrence region is the atrazine herbicide, which has a great contamination potential in the aquatic environment. Therefore, several studies into its toxicity in aquatic systems have been developed. However, the tested concentrations are usually very high and rarely found in the environment and the short-term exposure responses in other aquatic organisms such as native bivalves are still scarce. Thus, this study sought to consider the potential effects of environmentally realistic concentrations of atrazine herbicide on the surface morphology of gill filaments of the bivalve D. expansus under laboratory-controlled conditions after short-term exposure. None of the animals died before the end of the experiment. The main alterations were observed on the frontal surface of filaments, which include mucus accumulation, cilia loss, and disruption. Mucus increased secretion and accumulation in the frontal filaments region preceded as a protective mechanism. Cilia loss and disruption on the frontal surface of the gill filament indicated that ciliated frontal cells were more sensitive to atrazine exposure and these alterations may cause gills functional damages, compromising the uptake of food particles and respiration. Therefore, higher sublethal concentrations of atrazine may compromise the survival and consequently the population of D. expansus in agriculture areas after a longer period of continuous exposure.