The Influence of the Amount of Fluoride Catalyst on the Morphological Properties of the Anilinepropylsilica Xerogel Prepared in Basic Medium

Anilinepropylsilica hybrid powder was synthesized by a sol-gel route in basic medium using HF as catalyst. The effect of the amount of HF catalyst on the morphologies and on organic content was studied. The xerogels were characterized using FTIR, SEM and N₂ adsorption-desorption isotherms. The increase in the HF quantity results in an slight increase in organic content and changes in the particle size, surface area and pore structure.     

Surveillance test policy optimization through genetic algorithms using non-periodic intervention frequencies and considering seasonal constraints

In order to maximize systems average availability during a given period of time, it has recently been developed a non-periodic surveillance test optimization methodology based on genetic algorithms (GA). The fact of allowing non-periodic tests turns the solution space much more flexible and schedules can be better adjusted, providing gains in the overall system average availability, when compared to those obtained by an optimized periodic test scheme. This approach, however, turns the optimization problem more complex. Hence, the use of a powerful optimization technique, such as GA, is required.Considering that some particular features of certain systems can turn it advisable to introduce other specific constraints in the optimization problem, this work investigates the application of seasonal constraints for the set of the Emergency Diesel Generation of a typical four-loop pressurized water reactor in order to planning and optimizing its surveillance test policy. In this analysis, the growth of the blackout accident probability during summer, due to electrical power demand increases, was considered. Here, the used model penalizes surveillance test interventions when the blackout probability is higher.Results demonstrate the ability of the method in adapting the surveillance test policy to seasonal constraints. The knowledge acquired by the GA during the searching process has lead to test schedules that drastically minimize test interventions at periods of high blackout probability. It is compensated by more frequent redistributed tests through the periods of low blackout probability in order to improve on the overall average availability at the system level.     

Interface potential of calcium phosphate in simulated body fluid

Calcium phosphate ceramics are used in the substitution of injured or damaged bones. Nevertheless, the behaviour of these materials, and in particular, the mechanisms guiding their interface response in physiological environment is still unknown. This work describes the construction of hydroxyapatite and tricalcium phosphate electrodes used to determine the interface potential behaviour of these materials in a simulated body fluid, in a pH range corresponding to the variation observed in human body injuries, at ambient and physiological temperatures. These measurements are associated with the adsorption/desorption of ions from the materials. The results show that hydroxyapatite and tricalcium phosphate have similar behaviour in that they reach an interface potential equilibrium state faster when the solution pH is decreased and the temperature increased. This behaviour may be attributed to their ability to form a calcium-rich layer and is relevant to their quality as implantable materials.     

Automatically running experiments on checking multi-party contracts

Contracts play an important role in business management where relationships among different parties are dictated by legal rules. Electronic contracts have emerged mostly due to technological advances and electronic trading between companies and customers. New challenges have then arisen to guarantee reliability among the stakeholders in electronic negotiations. In this scenario, automatic verification of electronic contracts appeared as an imperative support, specially the conflict detection task of multi-party contracts. The problem of checking contracts has been largely addressed in the literature, but there are few, if any, methods and practical tools that can deal with multi-party contracts using a contract language with deontic and dynamic aspects as well as relativizations, over the same formalism. In this work we present an automatic checker for finding conflicts on multi-party contracts modeled by an extended contract language with deontic operators and relativizations. Moreover a well-known case study of sales contract is modeled and automatically verified by our tool. Further, we performed practical experiments in order to evaluate the efficiency of our method and the practical tool.

     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

Experimental design to evaluate properties of electrospun fibers of zein/poly (ethylene oxide) for biomaterial applications

The production of polymer fibers from the combination of zein and PEO might have great potential in the field of biomaterial. Zein/PEO fibers were obtained in this work through solution electrospinning. An experimental design, 2^4-1, was used for evaluating the influences of PEO content in the blend, distance from the needle tip to the collector, applied electric voltage and solution flow for average fiber diameter and relative-yield process. Beyond this, the relationship between PEO content in the blend and the fiber properties were evaluated through FTIR, DSC, TG, tensile tests, and cytotoxic tests. The factor that exerts the greatest effect on the average fiber diameter response was the electrical voltage. The increase in PEO content in the blend decreased the thermal stability and increased the degree of the fibers' crystallinity. The mechanical tests showed that fibers with higher elongation were obtained at richer PEO blends. The fibers presented cytocompatible characteristics.     

New insights into the morphology of Trypanosoma cruzi reservosome

Reservosomes are late endosomes present only in members of the Schizotrypanum subgenus of the Trypanosoma genus and are defined as the site of storage of endocytosed macromolecules and lysosomal enzymes. They have been extensively described in Trypanosoma cruzi epimastigote: are bounded by a membrane unit, present an electron-dense protein matrix with electron-lucent lipid inclusions, being devoid of inner membranes. Here we performed a detailed ultrastructural analysis of these organelles using a variety of electron microscopy techniques, including ultrathin sectioning, uranyl acetate stained preparations, and freeze fracture, either in intact epimastigotes or in isolated reservosomes. New informations were obtained. First, both isolated and in situ reservosomes presented small profiles of inner membranes that are morphologically similar to the membrane surrounding the organelle. In uranyl acetate stained preparations, internal membrane profiles turned out to be longer than they appeared in ultrathin section images and traversed the organelle diameter. Internal vesicles were also found. Second, endocytosed cargo are not associated with internal vesicles and reach reservosomes on board of vesicles that fuse with the boundary membrane, delivering cargo directly into reservosome lumen. Third, electron-lucent bodies with saturated lipid core surrounded by a membrane monolayer and with unusual rectangular shape were also observed. Fourth, it was possible to demonstrate the presence of intramembranous particles on the E face of both internal vesicles and the surrounding membrane. Collectively, these results indicate that reservosomes have a complex internal structure, which may correlate with their multiple functions.     

How can Cleaner Production practices contribute to meet ISO 14001 requirements? Critical analysis from a survey with industrial companies

The companies’ needs to adopt changes in their way of production to maximize the environmental performance required by their stakeholders, and at the same time, to maximize their economic and market performance, have made them seek for environmental strategies and certifications. In this sense, the Cleaner Production and the Environmental Management System based on ISO 14001 have been, respectively, presented, since the main objective of this research is to identify and analyze Cleaner Production contributions to comply with ISO 14001 requirements. For such, a survey research has been carried out in Brazilian industrial companies certified by ISO 14001. We have identified the main performance factors by leading practices and variables of Cleaner Production that contribute to the compliance with the standard requirements by companies. Thus, it has been noted that Cleaner Production is an important strategy for the preparation of companies for certification as well as for improving their environmental performance.     

A heuristic for minimizing weighted carry-over effects in round robin tournaments

The carry-over effects value is one of the various measures one can consider to assess the quality of a round robin tournament schedule. We introduce and discuss a new, weighted variant of the minimum carry-over effects value problem. The problem is formulated by integer programming and an algorithm based on the hybridization of the Iterated Local Search metaheuristic with a multistart strategy is proposed. Numerical results are presented.