五轴铣削加工中心坐标转换数学模型的建立及应用

首先以 HERMLE C1200 U 为例分析了五轴铣削加工中心的基本结构,然后据此给出了涉及多轴铣削加工中心后置处理角度分配和坐标变换的数学模型,最后介绍了以此数学模型为核心,为UG 软件开发的后置处理软件 UG-HERP1.0的解决方案。     

Interaction of Yttria with Uranium Fluoride Gases (UFn, n= 4, 6) at High Temperatures

The corrosion mechanism and microstructural characteristics of yttria (Y₂O₃) exposed to uranium hexafluoride (UF₄) and uranium tetrafluoride gases at temperatures above 900°C were investigated. Processed yttria samples were exposed for times ranging from 5 to 40 min. A weight increase was observed after each test exposure. An outer corrosion scale composed of UO₂ and YF₃, and an inner corrosion layer of YF₃, were observed following the UF₆ reaction at nearly 1200 K. During the UF₄ exposure, an outer layer containing a liquid mixture of fluoride, oxygen, yttrium, uranium compounds, a secondary reaction layer of UO₂ followed by an inner layer composed of a solution of Y₂O₃ and YF₃, possibly in the form of YOF inner layer, were observed. It was found that the corrosion process is controlled by the diffusion which is evidenced by the parabolic growth rate of the secondary layer. After completion of the solidification process, the formation of a eutectic region and dendrites were observed throughout the outer scale. In general, at temperatures above 1173 K, high corrosion rates were observed, and yttria did not appear to be a viable containment material for UF₄ and UF₆.     

Development of a suitable model for characterizing photovoltaic arrays with shaded solar cells

The aim of this study is to investigate the effects of non-uniform solar irradiation distribution on energy output of different interconnected configurations in photovoltaic (PV) arrays. In order to find which configuration is less susceptible to mismatch effects, a PV module model is developed. This model can take into consideration the effects of bypass diodes and the variation of the equivalent circuit parameters with respect to operating conditions. The proposed model can provide sufficient degree of precision as well as solar cell-based analysis in analyzing large scale PV arrays without increasing the computational effort. In order to produce more reliable and robust simulations, improved and extended algorithms are presented. Some results are discussed in detail and some recommendations are extracted by testing several shading scenarios.     

An accelerated algorithm for full band electron–phonon scattering rate computation

Computing scattering rates of electrons and phonons stands at the core of studies of electron transport properties. In the high field regime, the interactions between all electron bands with all phonon bands need to be considered. This full band interaction implies a huge computational burden in calculating scattering rates. In this study, a new accelerated algorithm is presented for this task, which speeds up the computation by two orders of magnitude (100 times) and dramatically simplifies the coding. At the same time, it visually demonstrates the physical process of scattering more clearly.     

An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures

Ultra-high molecular weight polyethylene (UHMWPE) is extensively used in frictional applications due to its advanced wear resistance. This advanced polymer is reinforced with hard particulate fillers for further developments against wear conditions. Since elevated temperatures prevail in the service conditions, wear behavior of UHMWPE composites is an important issue for the engineering applications. In the present work, UHMWPE-based composites including silicon carbide (SiC) fillers were fabricated in a compression molding chamber. In the specimen preparation stage, molding pressure, filler amount, and filler particle size were varied to investigate the influence of these variables. Upon deciding the optimum parameters from the wear tests conducted at room temperature, the wear experiments were repeated for the optimum specimen at elevated temperatures, such as 40 and 60°C. According to the results, the wear behavior of the SiC/UHMWPE composites is heavily changed by the effect of elevated temperature. Adhesive effect is pronounced at elevated temperatures while the wear characteristics possess the abrasive effect in the sliding path. In addition, the composites exhibit an accelerated material loss as temperature increases during the frictional system.     

Interval type-2 fuzzy inverse controller design in nonlinear IMC structure

In the recent years it has been demonstrated that type-2 fuzzy logic systems are more effective in modeling and control of complex nonlinear systems compared to type-1 fuzzy logic systems. An inverse controller based on type-2 fuzzy model can be proposed since inverse model controllers provide an efficient way to control nonlinear processes. Even though various fuzzy inversion methods have been devised for type-1 fuzzy logic systems up to now, there does not exist any method for type-2 fuzzy logic systems. In this study, a systematic method has been proposed to form the inverse of the interval type-2 Takagi-Sugeno fuzzy model based on a pure analytical method. The calculation of inverse model is done based on simple manipulations of the antecedent and consequence parts of the fuzzy model. Moreover, the type-2 fuzzy model and its inverse as the primary controller are embedded into a nonlinear internal model control structure to provide an effective and robust control performance. Finally, the proposed control scheme has been implemented on an experimental pH neutralization process where the beneficial sides are shown clearly.     

Investigation of Ant System parameter interactions by using design of experiments for job-shop scheduling problems

In recent years, one of the most important and promising research fields has been metaheuristics to find optimal or near-optimal solutions for NP-hard combinatorial optimization problems. Improving the quality of the solution or the solution time is basic research area on metaheuristics. Modifications of the existing ones or creation of hybrid approaches are the focus of these efforts. Another area of improving the solution quality of metaheuristics is finding the optimal combination of algorithm control parameters. This is usually done by design of experiments or one-at-a-time approach in genetic algorithms, simulated annealing and similar metaheuristics. We observe that, in studies which use Ant Colonies Optimization (ACO) as an optimization technique; the levels of control parameters are determined by some non-systematic initial experiments and the interactions of the parameters are not studied yet.In this study, the parameters of Ant System have been investigated on different sized and randomly generated job-shop scheduling problems by using design of experiments. The effects and interactions of the parameters have been interpreted with the outputs of the experiments. Referring to the statistical analysis it is observed that none of the interactions between the Ant System parameters has a significant effect on makespan value. A specific fractional experimental design is suggested instead of the full factorial design. Depending on the findings from the benchmark problems it will be a reliable approach to use the suggested design for saving time and effort in experiments without sacrificing the solution quality.