Freshwater fish as a dietary source of vitamin A in Cambodia

Vitamin A deficiency is a public health problem among children and women. Common Cambodian fish species were sampled and screened for vitamin A content. Contents of vitamin A-active compounds (all-trans retinol, all-trans dehydroretinol, 13-cis retinol, 13-cis dehydroretinol and β-carotene) were determined by high-performance liquid chromatography in samples of raw, whole fish from 29 fish species and in raw, edible parts from 24 species. Replicate samples were analysed in seven selected species. Two species, Parachela siamensis and Rasbora tornieri had very high vitamin A contents >1500 RAE/100 g raw, whole fish, and six species (Barbodes altus, Barbodes gonionatus, Dermogenys pusilla, Puntioplites proctozysron and Thynnichthys thynnoides) had high contents of 500–1500 RAE/100 g raw, whole fish. Two species, Puntioplites proctozysron and Thynnichthys thynnoides had high vitamin A contents in raw, edible parts, after employing traditional cleaning practices. (RAE: The amount of vitamin A active compounds in food is expressed as retinol activity equivalents (RAE), defined as the bioefficacy relative to all-trans-retinol [ West, C. E., & Eilander, A. (2002). Consequences of revised estimates of carotenoid bioefficacy for the control of vitamin A deficiency in developing countries. Journal of Nutrition, 132, 2920S–2926S]. Dehydroretinoids (vitamin A₂) are not converted to all-trans-retinol but have similar metabolic functions. In this paper, RAE refers to the functional bioefficacy as defined by Brouwer et al. [ Brouwer, I. A., Dusseldorp, M. V., West, C. E., & Steegers-Theunissen, R. P. M. (2001). Bioavailability and bioefficacy of folate and folic acid in man. Nutrition Research Review, 14, 267–293]).     

g-C3N4 coated SrTiO3 as an efficient photocatalyst for H2 production in aqueous solution under visible light irradiation

A highly active photocatalyst based on g-C₃N₄ coated SrTiO₃ has been synthesized simply by decomposing urea in the presence of SrTiO₃ at 400 °C. The catalyst demonstrates a high H₂ production rate ∼440 μmol h⁻¹/g catalyst in aqueous solution under visible light irradiation, which is much higher than conventional anion doped SrTiO₃ or physical mixtures of g-C₃N₄ and SrTiO₃. The improved photocatalytic activity can be ascribed to the close interfacial connections between g-C₃N₄ and SrTiO₃ where photo-generated electron and holes are effectively separated. The newly synthesized catalyst also exhibited a stable performance in the repeated experiments.     

Round‐robin measurement intercomparison of c‐Si PV modules among Asian testing laboratories

Because of recent advances in the production and installation of photovoltaic (PV) systems, the international conformity of PV module performance measurement has become increasingly important. The increase in PV production sites is particularly significant in the Asian region. The present paper summarizes and discusses the results of a round‐robin intercomparison of crystalline silicon modules among national laboratories and certified testing laboratories in the Asian region conducted from 2009 to 2011. Most of the values of P_max measured at the different laboratories were within a ±2% range, although some P_max results showed differences of up to about 3%. This result is comparable to that obtained in the recent intercomparison among international laboratories. Possible sources of difference in the measured values of I_sc, V_oc, FF, and P_max are discussed, for further improvement of international conformity in PV measurement technologies. Copyright © 2012 John Wiley & Sons, Ltd.     

High magnetic and ferroelectric properties of BZT-LSM multiferroic composites at room temperature

In this research, the effects of La_0.7Sr_0.3MnO₃ additive on the phase evolution, microstructure, dielectric, ferroelectric and magnetic properties of BaZr_0.07Ti_0.93O₃ ceramics were systematically investigated. The (BaZr_0.07Ti_0.93O₃)/x(La_0.7Sr_0.3MnO₃) or BZT/xLSM (where x?=?0, 5, 10 and 20?mol%) ceramics were prepared via a solid state reaction method. A pure perovskite phase is observed for the samples of x?≤?10?mol%. The M-H hysteresis loops also show an improvement in the magnetic behavior for higher LSM content samples as well as the modified ferroelectric properties. However, the 5?mol% sample exhibited the optimum ferroelectric and ferromagnetic properties with remnant magnetization (M_r) and remanent polarization (P_r) of 2.38?emu/g and 10.5?µC/cm², respectively. The dielectric-temperature curves show that the two phase-transition temperatures as observed for the unmodified BZT ceramic merges into a single phase-transition temperature for the 5?mol% sample and then become flat curves for the 10?mol% sample. In addition, the mechanical properties i.e. Knoop hardness and Young's modulus values increase with increasing LSM content, where Knoop hardness and Young's modulus values for the 20?mol% sample are increased by ~ 45% and ~ 104%, respectively, as compared to the unmodified sample.     

Excellent dielectric constants observed in heterogeneous conduction Ba(Zr<Subscript>0.25</Subscript>Ti<Subscript>0.75</Subscript>)O<Subscript>3</Subscript> ceramics doped with Sr(Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>)O<Subscript>3</Subscript>

The (1-x)Ba(Zr_0.25Ti_0.75)O₃-xSr(Fe_0.5Nb_0.5)O₃ or (1-x)BZT-xSFN ceramics have been fabricated via a solid-state reaction technique. All ceramics exhibit a pure phase perovskite with cubic symmetry. The addition of a small amount of SFN (x?=?0.1) produces an obvious change in dielectric behavior. Very high dielectric constants (ε_r?>?164,000 at 1 kHz and temperature?>?150°C) are observed and the value is obviously higher than dielectric constants for Ba(Zr_0.25Ti_0.75)O₃ and Sr(Fe_0.5Nb_0.5)O₃ ceramics. The ferroelectric measurement data suggests that the unmodified sample exhibited a ferroelectric behavior. However, a transformation from a ferroelectric to a relaxor-like behavior is noted with increasing x concentration. Impedance Spectroscopy (IS) analysis indicates that the presence of excellent dielectric constants is due to the heterogeneous conduction in the ceramics after adding SFN, which can be explained in terms of the Maxwell-Wagner polarization mechanism.     

Iron content in common Cambodian fish species: Perspectives for dietary iron intake in poor,rural households

Iron deficiency is the most widespread nutritional disorder in Cambodia. Sixteen Cambodian fish species were screened for iron, zinc and calcium contents. Esomus longimanus has a higher iron content (451 mg Fe/kg dry matter, SD = 155, n = 4) than other species. Iron pools were measured as inorganic iron (I-Fe) by the ferrozine method, haem-bound iron (H-Fe) by the acetone method and total iron (T-Fe) by atomic absorption spectrometry. I-Fe + H-Fe accounted for <50% of T-Fe in E. longimanus, indicating a pool of complex bound, probably high-molecular weight non-haem iron (Hm-Fe). In a field study, thirty rural women were interviewed about traditional use of E. longimanus; their cleaning and cooking practices were observed and the amounts of fish consumed were recorded and meal samples were collected for iron analysis. Calculations based on the iron content and a high bioavailability of Hm-Fe showed that a traditional fish meal, sour soup, covered 45% of the daily iron requirement for women.     

High thermal stability of energy storage density and large strain improvement of lead-free Bi0.5(Na0.40K0.10)TiO3 piezoelectric ceramics doped with La and Zr

Properties of lead-free Bi_0.5-xLa_xNa_0.40K_0.10Ti_0.98Zr_0.02O₃ (x?=?0.000–0.040) ceramics were investigated. All ceramics have a pure perovskite structure. A high energy storage density (～1.00?J/cm³) at room temperature (RT) is noted for the x?=?0.030 sample, while x?=?0.020 and 0.040 samples have very high thermal stability of energy storage density of ～3% (at 75–150?°C). Furthermore, the x?=?0.030 and 0.040 samples have the highest energy storage efficiency (η) value of 94% at 125?°C with high thermal stability (η?=?84–95% at 25–150?°C). The x?=?0.005 sample has high electric field-induced strain (S_max?=?0.42%) and high normalized strain coefficient (d^*₃₃?=?S_max/E_max?=?700?pm/V) with large improvements (～200% and 163% for S_max and d^*₃₃, respectively), as compared to the based composition. This ceramic system has potentials for piezoelectric and/or energy storage density applications.     

Syntheses,Li Insertion,and Photoactivity of Mesoporous Crystalline TiO2

Ordered mesoporous rutile and anatase TiO₂ samples are prepared using mesoporous silica SBA‐15 as template and freshly synthesized titanium nitrate and titanium chloride solutions as precursors. The rutile material formed from the nitrate solution is monocrystalline and contains minimal amounts of Si with a Si:Ti ratio of 0.031(4), whereas the anatase material formed from the chloride solution comprises nanocrystals and contains a higher content of Si with a Si:Ti ratio of 0.18(3). It is found that control of temperature and selection of Ti‐containing precursor play important roles in determining the crystal phase and crystallinity. A possible formation mechanism of porous crystalline TiO₂ is suggested. Characterization of these porous materials is performed by XRD, HRTEM, and nitrogen adsorption/desorption. SBA‐15‐templated mesoporous rutile TiO₂ exhibits a higher Li ion insertion capability than KIT‐6‐templated TiO₂ due to its larger surface area. Likewise mesoporous anatase TiO₂:SiO₂ composite has a better photoactivity than bulk TiO₂ or TiO₂‐loaded SBA‐15 for bleaching methylene blue.     

A red metallic oxide photocatalyst

Light absorption across the bandgap in semiconductors is exploited in many important applications such as photovoltaics, light emitting diodes and photocatalytic conversion. Metals differ from semiconductors in that there is no energy gap separating occupied and unoccupied levels; however, it is still possible to excite electrons between bands. This is evidenced by materials with metallic properties that are also strongly coloured. An important question is whether such coloured metals could be used in light harvesting or similar applications. The high conductivity of a metal would preclude sufficient electric field being available to separate photocarriers; however, the high carrier mobility in a metal might also facilitate kinetic charge separation. Here we clearly demonstrate for the first time the use of a red metallic oxide, Sr(1-x)NbO(3) as an effective photocatalyst. The material has been used under visible light to photocatalyse the oxidation of methylene blue and both the oxidation and reduction of water assisted by appropriate sacrificial elements.     

Effect of Ag loading on activated carbon doped ZnO for bisphenol A degradation under visible light

Silver modified activated carbon doped zinc oxide (Ag/AC-ZnO) was synthesized via a calcination-electroless deposition route. The samples were characterized by X-ray powder diffractometry, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity of the Ag/AC-ZnO was evaluated for bisphenol A degradation in the presence of H₂O₂ under visible light irradiation. The archived results showed that the photocatalytic activity of the Ag/AC-ZnO was higher than that of AC-ZnO and pure ZnO. The cytotoxicity of the bisphenol A after photocatalysis under visible light irradiation was tested using L929 mouse fibroblast cells and the obtained results indicated that the treated bisphenol A solution exhibited no cytotoxicity against normal cells.