CR-39 acceptance test and optimisation for fast neutron dosimetry applications

The ENEA fast neutron dosemeter is based on a planar PADC (poly allyl diglycol carbonate) placed in a polyethylene holder. The CR-39 (registered trademark of PPG Industries Inc.) material, produced by Intercast Europe S.p.A., has been used in the routine of the Individual Monitoring Service (IMS) since 1998. Since then, acceptance tests on average sheet background track density and sheet neutron sensitivity have been made on new batches as a quality control within a quality assurance programme of the IMS of ENEA-Institute for Radiation Protection (IRP). Dosemeters were irradiated with a 241Am-Be source at ENEA-IRP and processed through a chemical etching procedure (pre-etching with 40% KOH water solution 6.25 N and 60% ethyl alcohol at 70 degrees C followed by 12 h of etching in 6.25 N KOH water solution). In this paper we present the analysis of acceptance testing data for more than 30 sheets of CR-39 plastic produced in 1998, 1999 and 2000. Moreover, we compare the performance of sheets of CR-39 of standard composition with that of sheets of CR-39 with the addition of DOP (dioctylphthalate), in different concentrations, on the hasis of average background density, neutron sensitivity and background fluctuation that limit the lower detectable dose. This study demonstrates the need for acceptance tests to assure the quality of the dosimetric performance of these dosemeters, which is considerably dependent on the quality of the CR-39 plastic.     

Structural studies of enzyme-based microfluidic biofuel cells

An enzyme-based glucose/O₂ biofuel cell was constructed within a microfluidic channel to study the influence of electrode configuration and fluidic channel height on cell performance. The cell was composed of a bilirubin oxidase (BOD)-adsorbed O₂ cathode and a glucose anode prepared by co-immobilization of glucose dehydrogenase (GDH), diaphorase (Dp) and VK₃-pendant poly-l-lysine. The consumption of O₂ at the upstream cathode protected the downstream anode from interfering O₂ molecules, and consequently improved the cell performance (maximum cell current) ca. 10% for the present cell. The cell performance was also affected by the channel height. The output current and power of a 0.1 mm-height cell was significantly less than those of a 1 mm-height cell because of the depletion of O₂, as determined by the shape of the E–I curve at the cathode. On the other hand, the volume density of current and power was several times higher for the narrower cell.     

Experience in using the variational method in slope stability calculations

Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 4, pp. 46–48, April, 1990.     

Electrical properties of 1.5-nm SiON gate-dielectric using radical oxygen and radical nitrogen

We have developed a low-leakage and highly reliable 1.5-nm SiON gate-dielectric by using radical oxygen and nitrogen. In this development, we introduce a new method for determining an ultrathin SiON gate-dielectric thickness based on the threshold voltage dependence on the substrate bias in MOSFETs. It was found that oxidation using radical oxygen followed by nitridation using radical nitrogen provides the 1.5-nm (oxide equivalent thickness) SiON, in which leakage current is two orders of magnitude less than that of 1.5-nm SiO/sub 2/ without degrading device performance in NMOSFETs. The 1.5-nm (oxide equivalent thickness) SiON was also found to be ten times more reliable than 1.5-nm SiO/sub 2/.     

Characteristics of heart rate variability entropy and blood pressure during hemodialysis in patients with end-stage renal disease

Entropy (ENT) is a newly developed measure of the complexity of heart rate variability (HRV). The aim of this study was to characterize the complexity of HRV in patients with end-stage renal disease (ESRD) and to find a possible clinical utility. Healthy subjects and patients with ESRD undergoing hemodialysis (HD) were recruited. The HD population consisted of patients with and without diabetes mellitus (DM). An electrocardiogram was recorded before HD, and blood pressure was measured during HD. The coefficients of variation of R-R intervals, high- and low-frequency components, and ratio of the low- to high-frequency components were measured as variables of HRV. The ENT was used to describe the complexity of HRV. Forty-six healthy subjects and 27 HD patients participated in this study. The ENT negatively correlated with the duration of DM (p = 0.001), systolic blood pressure (p = 0.003), and mean blood pressure (p = 0.004) before a HD session. ENT in HD patients was lower than that in healthy subjects (p < 0.01). ENT in HD patients with DM was lower than that in HD patients without DM (p < 0.01). The change in systolic blood pressure (DeltaSBP) during a HD session showed high correlations to ENT and ultrafiltration rate (UFR) of the dialyzer. The following equation was obtained: DeltaSBP = 2.25 x ENT - 2.28 x UFR - 21.27 (R2 = 0.805; p < 0.0001). ENT decreased with uremic and diabetic status. ENT also represents a possible prediction of hypotension during a HD session.     

Characterization of manganese tetraarylthiosubstituted phthalocyanines self assembled monolayers

Manganese tetraarylthiosubstituted phthalocyanines (complexes 1-5) have been deposited on Au electrode surfaces through the self assembled monolayer (SAM) technique. SAM characteristics reported in this work are: ion barrier factor (∼1); interfacial capacitance (303-539 μF cm⁻²) and surface coverage (1.06 × 10⁻¹⁰-2.80 × 10⁻¹⁰ mol cm⁻²). Atomic force microscopy was employed in characterizing a SAM. SAMs of complexes 1-5 were employed to detect l-cysteine (with limit of detection ranging from 2.83 × 10⁻⁷ to 3.14 × 10⁻⁷ M at potentials of 0.68-0.75 V vs. Ag|AgCl) and nitrite (limit of detection ranging from 1.78 × 10⁻⁷ to 3.02 × 10⁻⁷ M at potentials of 0.69-0.76 V vs. Ag|AgCl).     

Single-shot beam-position monitor for x-ray free electron laser

We have developed an x-ray beam-position monitor for detecting the radiation properties of an x-ray free electron laser (FEL). It is composed of four PIN photodiodes that detect backscattered x-rays from a semitransparent diamond film placed in the beam path. The signal intensities from the photodiodes are used to compute the beam intensity and position. A proof-of-principle experiment at a synchrotron light source revealed that the error in the beam position is reduced to below 7 μm by using a nanocrystal diamond film prepared by plasma-enhanced chemical vapor deposition. Owing to high dose tolerance and transparency of the diamond film, the monitor is suitable for routine diagnostics of extremely intense x-ray pulses from the FEL.