Indoor heterogeneous photochemistry of furfural drives emissions of nitrous acid

People spend approximately 80% of their time indoor, making the understanding of the indoor chemistry an important task for safety. The high surface-area-to-volume ratio characteristic of indoor environments leads the semi-volatile organic compounds (sVOCs) to deposit on the surfaces. Using a long path absorption photometer (LOPAP), this work investigates the formation of nitrous acid (HONO) through the photochemistry of adsorbed nitrate anions and its enhancement by the presence of furfural. Using a high-resolution proton-transfer-reaction time-of-flight mass spectrometer (PTR-TOF-MS), this work also investigates the surface emissions of VOCs from irradiated films of furfural and a mix of furfural and nitrate anions. Among the emitted VOCs, 2(5H)-furanone/2-Butenedial was observed at high concentrations, leading to maleic anhydride formation after UV irradiation. Moreover, the addition of potassium nitrate to the film formed NO_x and HONO concentrations up to 10 ppb, which scales to ca. 4 ppb for realistic indoor conditions. This work helps to understand the high levels of HONO and NO_x measured indoors.     

Picosecond photodiffraction in semiconductor multiquantum wells and microcavities

We study the transient gratings photogenerated in the picosecond regime in three families of structures, namely : - structures of thickness in the order of one micron, including quantum wells (GaAs/GaAlAs, CdTe/ CdZnTe). A transmission modulation due to the electric field has been observed. We show that, in accordance with our calculations, this modulation is screened faster than 10 ps at a fluence of a few µJ/cm2. - A structure including GalnAs/GalnAsP MQWS in a cavity. This structure shows a top diffraction efficiency of 2.5 × 10-² at 1.55 µm for an energy of excitation in the order of 100 µJ/cm2. The diffraction efficiency exhibits several oscillations due to Fabry-Pårot effects. By introducing cavity effects in our model, we show that the diffraction efficiency is amplified by more than a factor 2 with respect to the no-cavity case. Calculations show that the diffraction efficiency may reach 6 × 10-² around 1.625 µm, for a front mirror reflectivity of 90 %. - Structures including bulk GaAs microcavities. The risetime is lower or in the order of 1 ps while the diffraction efficiency attains 1 %, with an average power of 4 mW (i.e. an energy of 2 µJ/cm²/pulse), compatible with a commutation of packets at 80 MHz.     

Multicenter study on the clinical value of fetal pulse oximetry. I. Methodologic evaluation. The French Study Group on Fetal Pulse Oximetry

OBJECTIVE: Our purpose was to evaluate the feasibility of intrapartum fetal pulse oximetry, the distribution of fetal oxygen saturation values, and the relationship with the neonatal outcome in a population with an abnormal fetal heart rate. STUDY DESIGN: A prospective multicenter observational study was performed from June 1994 to November 1995. Fetal oxygen saturation was continuously recorded with use of a Nellcor N-400 fetal pulse oximeter in case of an abnormal fetal heart rate during labor. Simultaneous readings of fetal oxygen saturation and fetal blood analysis were obtained at inclusion and before birth. Feasibility, adverse effects, distribution of fetal oxygen saturation values, and relationship with neonatal outcome were assessed. RESULTS: One hundred seventy-four patients were included. From 172 attempted sensor placements, the procedure was impossible in three cases and fetal oxygen saturation values were obtained in 164 cases (95.3%). Physicians considered sensor placement an easier task than an attempt at fetal blood analysis (easy in 87.5% vs 78.9% for fetal blood analysis, p = 0.03). The mean reliable signal time (+/- SD) was 64.7% +/- 32% during the first stage. There were no serious adverse effects in the study population. The mean fetal oxygen saturation during the first stage of labor was 42.2% +/- 8.0% (10th to 90th percentile range 30% to 53%). Fetal oxygen saturation was significantly correlated with scalp pH (r = 0.29, p = 0.01) but not with neonatal umbilical artery pH or gas values. There was a significant association between low fetal oxygen saturation (< 30%) and poor neonatal condition. CONCLUSION: The feasibility of fetal pulse oximetry is satisfactory in clinical practice. It is easy to use and provides a fair rate of recorded values, even in a population with suspicion of fetal distress. A low fetal oxygen saturation is significantly associated with an abnormal neonatal outcome.     

Scopolamine impairs human recognition memory: Data and modeling.

Eight subjects studied a set of complex visual images after administration of 0.4 mg scopolamine. Another 8 subjects performed the same task without drug administration. On a subsequent item recognition test, subjects rated, on a 5-point scale, their confidence that the studied pictures and an equal number of unstudied lures were actually presented. Results showed that scopolamine affected responses to studied items, but not unstudied lures, demonstrating an unambiguous effect of scopolamine on recognition memory. To describe the scopolamine-injected subjects' data, the authors constructed a new model of 2-process recognition that includes the A. P. Yonelinas (1994) model as a limiting case. The model analysis suggests that scopolamine affected both familiarity and recollection. In particular, scopolamine did not affect the frequency with which recollection took place, but rather, affected the amount of recollected information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Identification of leek-moth and diamondback-moth frass volatiles that stimulate parasitoid,Diadromus pulchellus

Acrolepiopsis assectella andPlutella xylostella frass volatiles, trapped on Tenax GC, were examined by capillary gas chromatography. In both moths, the same three disulfides, dimethyl, dipropyl, and methyl propyl, were the most abundant substances, but in different proportions. The synthetic disulfides elicited the same behavioral response by the parasitoid,Diadromus pulchellus as frass. The plant origin of these substances is discussed.     

Design and fabrication of 3D‐plotted polymeric scaffolds in functional tissue engineering

Regenerating the load‐bearing tissues requires 3D scaffolds that balance the temporary mechanical function with the biological requirements. In functional tissue engineering, designing scaffolds with biomimetic mechanical properties could promote tissue ingrowth since the cells are sensitive to their local mechanical environment. This work aims to design scaffolds that mimic the mechanical response of the biological tissues under physiological loading conditions. Poly(L ‐lactide) (PLLA) scaffolds with varying porosities and pore sizes were made by the 3D‐plotting technique. The scaffolds were tested under unconfined ramp compression to compare their stress profile under load with that of bovine cartilage. A comparison between the material parameters estimated for the scaffolds and for the bovine cartilage based on the biphasic theory enabled the definition of an optimum window for the porosity and pore size of these constructs. Moreover, the finite element prediction for the stress distribution inside the scaffolds, surrounded by the host cartilaginous tissue, demonstrated a negligible perturbation of the stress field at the site of implantation. The finite element modeling tools in combination with the developed methodology for optimal porosity/pore size determination can be used to improve the design of biomimetic scaffolds. POLYM. ENG. SCI., 47:608–618, 2007. © 2007 Society of Plastics Engineers.     

Density Displays for Data Stream Monitoring

In many business applications, large data workloads such as sales figures or process performance measures need to be monitored in real‐time. The data analysts want to catch problems in flight to reveal the root cause of anomalies. Immediate actions need to be taken before the problems become too expensive or consume too many resources. In the meantime, analysts need to have the “big picture” of what the information is about. In this paper, we derive and analyze two real‐time visualization techniques for managing density displays: (1) circular overlay d isplays which visualize large volumes of data without data shift movements after the display is full, thus freeing the analyst from adjusting the mental picture of the data after each data shift; and (2) variable resolution density displays which allow users to get the entire view without cluttering. We evaluate these techniques with respect to a number of evaluation measures, such as constancy of the display and usage of display space, and compare them to conventional d isplays with periodic shifts. Our real time data monitoring system also provides advanced interactions such as a local root cause analysis for further exploration. The applications using a number of real‐world data sets show the wide applicability and usefulness of our ideas.     

High-Dynamic-Range Texture Compression for Rendering Systems of Different Capacities

In this paper, we propose a novel approach for high-dynamic-range (HDR) texture compression (TC) suitable for rendering systems of different capacities. Based on the previously proposed DHTC scheme, we first work out an improved joint-channel compression framework, which is robust and flexible enough to provide compressed HDR textures at different bit rates. Then, two compressed HDR texture formats based on the proposed framework are developed. The 8 bpp format is of near lossless visual quality, improving upon known state-of-the-art algorithms. And, to our knowledge, the 4 bpp format is the first workable 4 bpp solution with good quality. We also show that HDR textures in the proposed 4 bpp and 8 bpp formats can compose a layered architecture in the texture consumption pipeline, to significantly save the memory bandwidth and storage in real-time rendering. In addition, the 8 bpp format can also be used to handle traditional low dynamic range (LDR) RGBA textures. Our scheme exhibits a practical solution for compressing HDR textures at different rates and LDR textures with alpha maps.     

Calibration of Cameras with Radially Symmetric Distortion

We present algorithms for plane-based calibration of general radially distorted cameras. By this, we understand cameras that have a distortion center and an optical axis such that the projection rays of pixels lying on a circle centered on the distortion center form a right viewing cone centered on the optical axis. The camera is said to have a single viewpoint (SVP) if all such viewing cones have the same apex (the optical center); otherwise, we speak of NSVP cases. This model encompasses the classical radial distortion model [5], fisheyes, and most central or noncentral catadioptric cameras. Calibration consists in the estimation of the distortion center, the opening angles of all viewing cones, and their optical centers. We present two approaches of computing a full calibration from dense correspondences of a single or multiple planes with known euclidean structure. The first one is based on a geometric constraint linking viewing cones and their intersections with the calibration plane (conic sections). The second approach is a homography-based method. Experiments using simulated and a broad variety of real cameras show great stability. Furthermore, we provide a comparison with Hartley-Kang's algorithm [12], which, however, cannot handle such a broad variety of camera configurations, showing similar performance.