Efficient performance analysis of asynchronous cellular CDMA overRayleigh-fading channels

The bit error rate (BER) analysis of a direct-sequence code-division multiple-access (DS-CDMA) cellular system over a Rayleigh-fading channel often results in complicated expressions even though the Gaussian approximation is applied. A combined probability density function (pdf) approach for the forward link and a mean-method technique for the reverse link are proposed to significantly reduce the computational complexity. The simplified BER expressions are derived and yield accurate results     

Selective hydrogenation of oleic acid to 9-octadecen-1-ol: Catalyst preparation and optimum reaction conditions

A new catalyst, ruthenium-tin-alumina is found to selectively hydrogenate oleic acid to 9-octadecen-1-ol (oleyl + elaidyl alcohol) at low pressure with high yield. Catalyst preparation methods, catalyst raw materials and activation conditions have a significant effect on the activity of the catalyst. The optimum atomic ratio of ruthenium to tin is about 1:2. Catalyst prepared by an improved sol-gel method shows higher activity and selectivity than catalysts prepared by impregnation and coprecipitation methods. Chloride is found to have a negative effect on catalytic activity. The best catalyst is prepared from chloride-free ruthenium and tin raw materials. Under the optimum reaction conditions of 250°C and 5.6 MPa, the selectivities for 9-octadecen-1-ol and total alcohol (9-octadecen-1-ol + stearyl alcohol) formation are 80.9% and 97%, respectively, at a conversion of 81.3%.     

Objective evaluation of speech dysfluencies using wavelet packet transform with sample entropy

Dysfluency and stuttering are a break or interruption of normal speech such as repetition, prolongation, interjection of syllables, sounds, words or phrases and involuntary silent pauses or blocks in communication. Stuttering assessment through manual classification of speech dysfluencies is subjective, inconsistent, time consuming and prone to error. This paper proposes an objective evaluation of speech dysfluencies based on the wavelet packet transform with sample entropy features. Dysfluent speech signals are decomposed into six levels by using wavelet packet transform. Sample entropy (SampEn) features are extracted at every level of decomposition and they are used as features to characterize the speech dysfluencies (stuttered events). Three different classifiers such as k-nearest neighbor (kNN), linear discriminant analysis (LDA) based classifier and support vector machine (SVM) are used to investigate the performance of the sample entropy features for the classification of speech dysfluencies. 10-fold cross validation method is used for testing the reliability of the classifier results. The effect of different wavelet families on the classification performance is also performed. Experimental results demonstrate that the proposed features and classification algorithms give very promising classification accuracy of 96.67% with the standard deviation of 0.37 and also that the proposed method can be used to help speech language pathologist in classifying speech dysfluencies.     

Technology application in project-based learning

Project-based learning is a student-centered comprehensive instructional approach where students collectively engage themselves in complex learning tasks. Recent advances in educational technologies have made student-centered learning in a technology rich environment both possible and feasible. This paper will report part of a larger study carried out at a school in the United States of America on the use ofconstructivism and technology in project-based learning. Data collection techniques included those typically associated with qualitative field research. In this paper, the technological infrastructure of the school and how technology is used in one of the project-based learning classes will be provided. Based on this study, some suggestions are also provided on how technology can be used in the context of other countries including in Malaysia.     

An efficient microfluidic sorter: implementation of double meandering micro striplines for magnetic particles switching

The ability to trap, manipulate, and separate magnetic beads has become one of the key requirements in realizing an integrated magnetic lab-on-chip biosensing system. In this article, we present the design and fabrication of an integrated magneto-fluidic device for sorting magnetic particles with a sorting efficiency of up to 95%. The actuation and manipulation of magnetic beads are realized using microfabricated square meandering current-carrying micro striplines. The current is alternated between two neighboring micro striplines to switch the magnetic beads to either one of the two outlets. We performed a series of parametric study to investigate the effect of applied current, flow rate, and switching frequency on the sorting efficiency. Experimental results reveal that the sorting efficiency is proportional to the square of current applied to the stripline, and decreases with increasing buffer flow rate and switching frequency. Such phenomena agree well with our theoretical analysis and simulation result. The fastest switching rate, which is limited by the microchannel geometry and bead velocity, is 2 Hz.     

Micromechanical digital-to-analog converter for out-of-plane motion

This paper describes a novel micromechanical digital-to-analog converter (MDAC) for out-of-plane motion using electrostatic parallel-plate actuators. The proposed mechanism converts an N-bit digital signal to a mechanical out-of-plane displacement that is proportional to the analog value represented by the N-bit binary word. The mechanism is analogous to that of an electrical binary-weighted-input digital-to-analog converter (DAC). It consists of a movable platform, an array of parallel-plate microactuators each operating in an ON/OFF mode and a set of connection springs that connect the actuators to the platform. The spring constants of the connection springs are weighted so that the stiffness of successive springs is related by a factor of 2. A 4-bit mechanism has been fabricated using the Poly-MUMPS process, achieving a total stroke of 675 nm (full-scale output) and step size (LSB) of 45 nm in a highly repeatable and stable manner. The linearity error (LE) of the device is within /spl plusmn/0.28 LSB, and the differential linearity error (DLE) is within /spl plusmn/0.25 LSB. This mechanism can be configured for many promising applications, particularly in optical devices and systems such as tunable external cavity diode laser, tunable VCSELs, adaptive micromirror array and tunable wavelength filter.     

Capturing Attention When Attention "Blinks".

Four experiments addressed the question of whether attention may be captured when the visual system is in the midst of an attentional blink (AB). Participants identified 2 target letters embedded among distractor letters in a rapid serial visual presentation sequence. In some trials, a square frame was inserted between the targets; as the only geometric object in the sequence, it constituted a singleton. Capture effects obtained when the AB was most severe and when it was over were compared. There were 3 main results. First, capture occurred even when the AB was crippling, suggesting that a singleton exogenously engaged attention even when processing of a previous target was continuing apace. Second, when the singleton contained the key target feature, capture effects were clearly manifest. Third, even when the singleton did not possess the key target feature, it still succeeded in capturing attention, although the effects were both feeble and fleeting. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Measuring hydraulic properties of geotextiles after installation damage

Since geotextiles have been progressively incorporated into coastal protection structures, the influence of installation damage on them has been the primary concern. During installation/construction, geotextiles are repeatedly subjected to high mechanical stresses which often exceed service stress. It is therefore vital to evaluate the mechanical and hydraulic damage and determine the consequences of these damages to better develop criteria for selection of suitable products. As these damages could reduce the material's mechanical strength and hydraulic efficiency, or in the severest form of damage, puncturing, would end the separation function. The properties investigated in this paper include the permittivity and apparent opening size (AOS) of geotextiles. Generally, the greater the drop energy of armour units applied to geotextiles, the greater the potential for damage. Findings show that the residual permittivity could increase significantly, 45% during installation. The preliminary design of coastal structures will be optimised as engineers and designers can better estimate the amount of damage on geotextiles upon installation.     

Robust low bit‐rate transmission using multiple‐PBDBS (MPBDBS) approach

Abstract

Recently, Gao and Tu presented an efficient algorithm for robust low bit‐rate video transmission by using a partial backward decodable bit stream (PBDBS) approach. In this paper, we first present a multiple‐PBDBS (MPBDBS) approach to improve on the previous PBDBS approach. Next a mathematical theory is provided to minimize the error propagation length in each group of blocks (GOB). Further, a novel MPBDBS‐based algorithm is presented for robust video transmission. Experimental results demonstrate that our proposed MPBDBS‐based algorithm has better image quality when compared to the previous PBDBS‐based algorithm, but has some bit‐rate and execution‐time degradation. In our experiments, both single and two‐bit error models are investigated.