Hydrogel photocatalysts for efficient energy conversion and environmental treatment

Photocatalysts have attracted great research interest owing to their excellent properties and potential for simultaneously addressing challenges related to energy needs and environmental pollution. Photocatalytic particles need to be in contact with their respective media to exhibit efficient photocatalytic performances. However, it is difficult to separate nanometer-sized photocatalytic materials from reaction media later, which may lead to secondary pollution and a poor recycling performance. Hydrogel photocatalysts with a three-dimensional (3D) network structures are promising support materials for photocatalysts based on features such as high specific surface areas and adsorption capacities and good environmental compatibility. In this review, hydrogel photocatalysts are classified into two different categories depending on their elemental composition and recent progresses in the methods for preparing hydrogel photocatalysts are summarized. Moreover, current applications of hydrogel photocatalysts in energy conversion and environmental remediation are reviewed. Furthermore, a comprehensive outlook and highlight future challenges in the development of hydrogel photocatalysts are presented.     

Effect of the addition of NH4F on anodic behaviors of DSA-type electrodes in H2SO4-(NH4)2SO4 solutions

The effect of NH₄F addition on the high-anodic behaviors of various DSA-type electrodes was investigated in a mixture of sulfuric acid and ammonium sulfate. The pronounced effect of NH₄ addition was observed on DSA-type Ti/RuO₂, Ti/IrO₂?TiO₂ electrodes, but not observed on the other electrodes studied. The close relationship was found between the increment of the electrode potential caused by the NH₄ addition and the quantity of F^? adsorbed on the electrode surface. The effect of NH₄F addition was considered to be resulted from the adsorption of F^? on the electrode surface, and the presence of adsorbed F^? was directly proved.     

Coal liquefaction by in-situ hydrogen generation.: 2. Zinc-water model compound reactions

Model compound studies were carried out to elucidate the reaction mechanisms taking place during the liquefaction of coal with the hydrogen produced from the reaction of zinc and water. In compounds of the type Ph-(CH₂)_n-Ph the splitting of the aliphatic bridge was easier with higher n values. Ether type compounds such as diphenylether were unreactive although the C-O bond in dibenzylether was easily cleaved. Condensed ring aromatic compounds gave low conversion with hydrogenation being facilitated by an increase in ring number. Phenolic compounds such as phenol did not react well, but the reactivity increased with increase in aromatic ring size. The cleavage of the aliphatic bridge was accelerated by the OH group, for example, in the case of 4-hydroxydiphenylmethane bond scission was about 15 times higher than that of diphenylmethane. Heterocyclic compounds were unreactive.     

Size exclusion behavior of polymers in amide solvents

Summary The size exclusion chromatography of neutral polymers and polymers containing ionic groups was investigated using N,N-dimethylacetamide (DMA) as mobile phase. As reported previously for N,N-dimethylformamide (DMF), acrylonitrile polymers containing charges, even those at terminal end groups, showed markedly small retention volumes and multimodal peaks by refractive index and 280 nm UV detectors. In DMA containing small amounts of LiBr the peaks of the ionic polymers were shifted to small retention volumes while neutral polymers with analogous chemical structures did not show the same behavior. As in the case of DMF the peculiarities observed in DMA were attributed to the formation of supramolecular structures by the interaction of the ionic groups in the polymer and the ionic species from DMA decomposition.     

The electrocatalytic activities of the Pd-doped MnO2 for the chlorine evolution reaction

The anodic evolution of chlorine on the massive β-MnO₂ doped with various amounts of Pd was investigated in acidic chloride solution. A second-order relation was found between the rate of the chlorine evolution reaction and the number of active Pd sites at the electrode surface. And it was confirmed that, in the relatively low doped electrodes, the active sites are more effectively dispersed on the surface with microscopic homogeneity. From the activation energies, it was also suggested that the reaction mechanism on the MnO₂ doped with relatively small amounts of Pd is somewhat different from that on the pure PdO electrode.     

Anodic polarization of aluminium in organic electrolytes

The polarization characteristics of aluminium anodes have been studied in various organic electrolytes containing aluminium chloride. The small amount of oxide present on the metal was dissolved by an anodic pre-treatment. The charge transfer number of the overall reaction was three. The current density supported by the electrolytes decreased in the order nitromethane>acetonitrile >propylene carbonate, formamide>tetrahydrofuran. The rest potential increased in the order formamide     

Molecular species of 1-O-alk-1′-enyl-2-acyl-, 1-O-alkyl-2-acyl- and 1,2-diacyl glycerophospholipids in Japanese oysterCrassostrea gigas (Thunberg)

Molecular species of 1-O-alk-1′-enyl-2-acyl-, 1-O-alkyl-2-acyl-, and 1,2-diacyl-sn-glycero-3-phosphoethanolamine (EPL) andsn-glycero-3-phosphocholine (CPL) of Japanese oysterCrassostrea gigas were analyzed by selectedion monitoring gas chromatography/mass spectrometry using electron impact ionization. The characteristic fragment ions, [RCH=CH+56]⁺ due to the alkenyl residue in thesn-1 position and [RCO+74]⁺ due to the acyl residue in thesn-2 position of alkenylacylglycerols, [R+130]⁺ due to the alkyl residue in thesn-1 position and [RCO+74]⁺ due to the acyl residue in thesn-2 position of alkylacylglycerols, [RCO+74]⁺ due to the acyl residues in thesn-1 and/orsn-2 positions of diacylglycerols, and [M−57]⁺ being indicative of the corresponding molecular weight, were used for structural assignments. For alkenylacyl EPL and CPL, 19 and 16 molecular species were determined, respectively. Two molecular species, 18∶0alkenyl-22∶6n−3 and 18∶0-alkenyl-22∶2-non-methylene interrupted diene (NMID), amounted to 53.2% and 47.9%, respectively. The alkylacyl EPL and CPL consisted of 16 and 20 molecular species, respectively, and the prominent components were 18∶0alkyl-22∶2NMID, 20∶1alkyl-20∶1n−11 (27.4%) and 20∶1alkyl-20∶2NMID (16.3%) in the former, and 16∶0alkyl-20∶5n−3 (23.0%) and 16∶0alkyl-22∶6n−3 (21.6%) in the latter. For the diacyl EPL and CPL, 14 and 51 molecular species were determined, respectively. The major molecular species were 18∶0–20∶5n−3 (37.4%), 16∶0–20∶5n−3 (14.2%) and 18∶1n−7–22∶2NMID (13.2%) in the former, and 16∶0–20∶5n−3 (33.4%) and 16∶0–22∶6n−3 (22.3%) in the latter. It was found that there were significant differences in the molecular species between the alkylacyl and diacyl EPL and the alkylacyl and diacyl CPL; the number of molecular species was larger in CPL than in EPL, while the number of total carbons and double bonds of the major molecular species were larger in the EPL than in the CPL. Alkenylacyl EPL were similar to alkenylacyl CPL in molecular species composition.     

Brave induction: a logical framework for learning from incomplete information

This paper introduces a novel logical framework for concept-learning called brave induction. Brave induction uses brave inference for induction and is useful for learning from incomplete information. Brave induction is weaker than explanatory induction which is normally used in inductive logic programming, and is stronger than learning from satisfiability, a general setting of concept-learning in clausal logic. We first investigate formal properties of brave induction, then develop an algorithm for computing hypotheses in full clausal theories. Next we extend the framework to induction in nonmonotonic logic programs. We analyze computational complexity of decision problems for induction on propositional theories. Further, we provide examples of problem solving by brave induction in systems biology, requirement engineering, and multiagent negotiation.     

Dimethyl Fumarate Induces Apoptosis via Inhibition of NF-κB and Enhances the Effect of Paclitaxel and Adriamycin in Human TNBC Cells

Triple-negative breast cancer (TNBC) has the poorest prognosis of all breast cancer subtypes. Recently, the activation of NF-κB, which is involved in the growth and survival of malignant tumors, has been demonstrated in TNBC, suggesting that NF-κB may serve as a new therapeutic target. In the present study, we examined whether dimethyl fumarate (DMF), an NF-κB inhibitor, induces apoptosis in TNBC cells and enhances the apoptosis-inducing effect of paclitaxel and adriamycin. Cell survival was analyzed by the trypan blue assay and apoptosis assay. Protein detection was examined by immunoblotting. The activation of NF-κB p65 was correlated with poor prognosis in patients with TNBC. DMF induced apoptosis in MDA-MB-231 and BT-549 cells at concentrations that were non-cytotoxic to the normal mammary cell line MCF-10A. Furthermore, DMF inhibited NF-κB nuclear translocation and Survivin, XIAP, Bcl-xL, and Bcl-2 expression in MDA-MB-231 and BT-549 cells. Moreover, DMF enhanced the apoptosis-inducing effect of paclitaxel and adriamycin in MDA-MB-231 cells. These findings suggest that DMF may be an effective therapeutic agent for the treatment of TNBC, in which NF-κB is constitutively active. DMF may also be useful as an adjuvant therapy to conventional anticancer drugs.     

Novel Method to Measure the Creep Strength of Adhesively Bonded Butt Joints Subjected to Constant Loading Using a Hydro-Pneumatic Testing Machine

This article proposes a new method to measure the creep strength of adhesively bonded joints using a hydro-pneumatic testing machine and a specimen holder, on which multi-specimens can be mounted in one testing machine. Creep tests were conducted on stainless steel butt joints bonded with epoxy adhesives. A hydro-pneumatic loading system was introduced to avoid successive failures of multi-specimens as well as to achieve a stable and constant loading through the experiments. Even after a failure occurs in one of the joints and thus generates an impact, the loading system is capable of absorbing the shock so that the other remaining joints do not fail simultaneously. It was experimentally verified that choke valves, which were introduced in the hydraulic circuit of the system, worked as a damper when failure occurred. Additionally, it was established that automatic reloading to the remaining specimens after the failure was short enough compared with the creep rupture time. As this new method relates to the efficiency of creep testing, the utility of the proposed approach with the multi-specimen setup has been verified.