Siliconizing of molybdenum plate using Si2Cl6 and some of its properties

Molybdenum plate was siliconized using Si₂Cl₆ as a silicon source, and the siliconizing conditions and some of its properties were examined. The siliconizing of the molybdenum plate began by the deposition here and there of island-like MoSi₂ deposits 4 to 6m thick in the initial stage (after 10 min induction time), and then coalescence of the deposits proceeded to form a uniform MoSi₂ layer all over the molybdenum plate after 30 min siliconizing time. The weight decrease of the siliconized plate by anodic dissolution in 0.2 M sulphuric acid reduced exponentially with increasing thickness of the MOSi₂ layer, and no weight decrease was observed at all above 16m thickness. The sea water corrosion and sea sand abrasion resistivities of the siliconized molybdenum plate increased with increasing siliconizing temperature and Si₂Cl₆ flow rate.     

Influence of the methyl group on the dielectric constant of boron carbon nitride films containing it

LSI interconnect insulators made using low dielectric constant (low-k) materials are required for high performance devices with a small RC delay. We investigated a boron carbon nitride film containing the methyl group (Me–BCN) using tris-di-methyl-amino-boron (TMAB: B[N(CH₃)₂]₃) gas as a low-k material. In addition, we studied the influence of the methyl group on the dielectric constant (k-value) and the properties of the Me–BCN films. It was found that the k-value of the Me–BCN films decreases with increasing number of C–H bonds due to the methyl group (CH₃). The number of O–H bonds due to water incorporation is suppressed by increasing the number of C–H bonds. Consequently, we suggested that a lower k-value can be realized by the suppression of water invasion by a hydrophobic surface due to methyl bonds. Thus, the control of the methyl group is important to achieve a low-k material using Me–BCN films.     

Improvement of anode oxidation reaction of a fuel cell using ammonium formate with Pt‐Ir catalysis

We have attempted to develop high‐performance and safe fuel cells by using ammonium formate as a solid (powder) fuel. This solid fuel has the potential of safer transportability than liquid fuels such as methanol from the viewpoint of toxicity and flammability. In order to make use of some of the advantages of ammonium formate, we investigated the oxidation characteristics of ammonium formate with respect to a Pt electrode. Cyclic voltammograms indicate that ammonium formate has high oxidation activity with respect to a Pt electrode. We have also found that the oxidation of ammonium formate can be improved by the addition of Ir to Pt catalysts. It is highly likely that ammonium formate will be useful as a solid (powder) fuel for polymer electrolyte membrane (PEM) fuel cells. This new fuel will promote the development of safe fuel cells for PEM. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 45–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21043     

Rapid sensing of trace ionic substances with the novel porous monolith type ion exchanger

Biological and chemical sensor with a rapid response in microlevel test is required for health and environmental monitor. A novel sensing due to porous ion exchanger with three-dimensional acceptor has been first attempted to develop a high-performance sensor. This porous monolith type ion exchanger has an open-cellular monolith structure with 5–50-μm diameter pores. The trace amount of inorganic ions dissolved in aqueous solutions can be quantitatively determined with the impedance given by the monolith, which attracts and adsorbs the ions rapidly. We have succeeded in detecting ions with a concentration as low as 10⁻⁷ mol. The porous ion exchanger has a potentiality as a high-performance device for biological and chemical sensing. POLYM. ENG. SCI., 47:1666–1670, 2007. © 2007 Society of Plastics Engineers     

Atomic bonds in boron carbon nitride films synthesized by remote plasma-assisted chemical vapor deposition

Boron carbon nitride (BCN) films are synthesized by remote plasma-assisted chemical vapor deposition (RPCVD) method. The present experimental apparatus is featured by introducing BCl₃ gas near the substrate without mixing to plasma consisting of N₂ and CH₄ gases. Two sample groups of the BCN films are prepared. One is grown with various CH₄ flow rates, and another is grown with various BCl₃ flow rates. The composition ratio of the constituent atoms, atomic bonds and optical bandgap are investigated. C composition ratio of the BCN film increases with increasing CH₄ flow rate, leading to a reduction in the optical bandgap with increasing C composition ratio. On the other hand, it is found that no significant variation in the composition ratio occurs for the BCN films grown with various BCl₃ flow rates and that the optical bandgap decreases with increasing BCl₃ flow rate. This behavior of the optical bandgap is related to a change of the atomic bonds in the BCN film grown with various BCl₃ flow rates.     

External-cavity semiconductor laser with focusing grating mirror

A novel external-cavity semiconductor laser with a focusing grating mirror (FGM), which enables a single-mode oscillation at a specified wavelength, is proposed. The optical properties of the FGM, which is a computer-generated holographic grating with chirp and bend structure, are numerically analyzed. An optimally designed FGM for realizing laser oscillation at a specific wavelength of 1.30 μm is fabricated by using a computer-controlled electron-beam writing system. The fabricated FGM with grating area of 1×1 mm² is combined as an external feedback mirror with an InGaAsP-InP semiconductor laser of 1.3 μm wavelength range, and the lasing characteristics are experimentally measured. Stable and single-mode oscillations with spectral line width less than 10 MHz are observed     

IL-10 in Mast Cell-Mediated Immune Responses: Anti-Inflammatory and Proinflammatory Roles

Mast cells (MCs) play critical roles in Th2 immune responses, including the defense against parasitic infections and the initiation of type I allergic reactions. In addition, MCs are involved in several immune-related responses, including those in bacterial infections, autoimmune diseases, inflammatory bowel diseases, cancers, allograft rejections, and lifestyle diseases. Whereas antigen-specific IgE is a well-known activator of MCs, which express FcεRI on the cell surface, other receptors for cytokines, growth factors, pathogen-associated molecular patterns, and damage-associated molecular patterns also function as triggers of MC stimulation, resulting in the release of chemical mediators, eicosanoids, and various cytokines. In this review, we focus on the role of interleukin (IL)-10, an anti-inflammatory cytokine, in MC-mediated immune responses, in which MCs play roles not only as initiators of the immune response but also as suppressors of excessive inflammation. IL-10 exhibits diverse effects on the proliferation, differentiation, survival, and activation of MCs in vivo and in vitro. Furthermore, IL-10 derived from MCs exerts beneficial and detrimental effects on the maintenance of tissue homeostasis and in several immune-related diseases including contact hypersensitivity, auto-immune diseases, and infections. This review introduces the effects of IL-10 on various events in MCs, and the roles of MCs in IL-10-related immune responses and as a source of IL-10.     

Minimization of Friction at Various Speeds Using Autonomous Viscosity Control of Nematic Liquid Crystal

To demonstrate the concept of the smart lubrication system using liquid crystal (LC) lubricant proposed by Nakano (Tribol Lett 14:17–24, 2003), the following three types of tests were performed: (1) film thickness measurements in pure rolling contacts, (2) friction coefficient measurements in rolling–sliding contacts, and (3) molecular orientation measurements in stationary cells. In all of these types of tests, a nematic LC [4-pentyl-4′-cyanobiphenyl (5CB)] and a carboxylic acid [hexadecanoic acid (HDA)] were used as the base fluid and the additive, respectively. The results of these tests confirm the following mechanism. First, surface films of the HDA additive that spontaneously adsorb onto contact surfaces induce surface anchoring, which has the effect of making 5CB molecules align themselves perpendicular to the surfaces, competing with the flow alignment of 5CB molecules and inducing an increase in the apparent viscosity of 5CB with decreasing entrainment speed. This increase in the apparent viscosity generates a constant friction coefficient region in the Stribeck curve on the left side of the minimum friction coefficient point, resulting in the minimization of friction at various speeds.     

Effects of isocyanuric acid on the monochlorodimedone chlorinating rates with free chlorine and ammonia chloramine in water

Changes in monochlorodimedone (MCD) chlorinating rates with free chlorine (mixture of HOCl and OCl-) and ammonia monochloramine (NH2Cl) in water at pH 7 by the addition of isocyanuric acid (H3Cy) were determined at room temperature. Decreases in MCD absorbance at 290nm in equimolar (0.04mM) reactions of MCD and free available chlorine solutions containing H3Cy (0.01-1.60 mM) were recorded in a stopped-flow spectrophotometer. The rates indicate second-order reactions. Since the rate with free chlorine was high (> 7.6 x 10(6) M(-1) s(-1)), the amounts of free chlorine in the solutions could be distinguished from that of chlorinated cyanurates. The chlorinating rates with chlorinated cyanurates decreased with an increase in H3Cy concentrations. Plotting the rates against the molar ratio of chlorine to H3Cy showed a linear correlation and the rates with chlorinated cyanurates (H2ClCy) was estimated at 0.5 x 10(5) M(-1) s(-1). In contrast, the rates with the NH2Cl solution containing H3Cy increased with an increase in H3Cy concentrations, increasing from 1.2 x 10 to 2.7 x 10 M(-1) s(-1) by the addition of 1.55 mM H3Cy. The DPD color development rates (OD512/t1/2/M) with free available chlorine (0.015mM) declined from 1.3 x 10(5) to 0.9 x 10(5)M(-1) by the addition of 0.61 mM H3Cy.     

Effect of the radio-frequency power on the dielectric properties of hydrogen-containing boron carbon nitride films deposited by plasma-assisted chemical vapor deposition using tris(dimethylamino)boron gas

We investigated the properties of boron carbon nitride film containing hydrogen (BCNH film) deposited using tris(dimethylamino)boron as the source gas. The dielectric constant (k) of BCNH film decreases with decreasing radio-frequency plasma power used for deposition, and can be as low as 1.8 at 10 W. Thermal desorption spectroscopy analysis shows that the film contains a large amount of hydrogen. Fourier transform infrared spectroscopy shows an absorption band at 2960 cm−1, attributed to the asymmetrical stretching mode of C-H in the methyl group. It is thought that increasing the number of C-H bonds, which have a low polarizability, can achieve a lower k value.