Aging time dependence of catastrophic optical damage (COD) failureof a 0.98-μm GaInAs-GaInP strained quantum-well laser

In this paper, we studied the aging time dependence of the catastrophic optical damage (COD) failure of an Al-free uncoated 0.98-μm GaInAs-GaInP strained quantum-well laser with an injection current as a parameter. Based on the stress-strength model, we first investigated experimentally the dependence of the critical power level (CPL) at which COD would take place upon the aging time. Then applying a statistical treatment to this result, we found for the first time that CPL data at each aging time could be considered to distribute according to the Weibull statistics, and the decrease rate of the CPL with the aging time depended very strongly on the injection current. Finally, using the relationship between the decrease rate of the CPL with the aging time and the current, we predicted roughly the time of a COD failure occurrence for both large and small current cases. As a result, we clarified that for our Al-free uncoated 0.98-μm laser, a COD failure became a fatal problem in the case of a large-current (high-power) operation     

Intestinal metaplasia with adherent Helicobacter pylori: a hybrid epithelium with both gastric and intestinal features

Helicobacter pylori seem to avoid areas of intestinal metaplasia in the gastric mucosa, but attachment of these bacteria to epithelium with the appearance of incomplete intestinal metaplasia has been documented. To characterize the nature of the epithelium to which H pylori was attached, we carried out an immunohistochemical study using monoclonal antibodies against gastric surface mucous cell mucins (M1), blood group-related carbohydrates antigens (Le(a), sialyl Le(a), Le(b), type 1H, and type 2H) and sialyl Tn antigen. The results of this study suggest that these areas of H pylori attachment represent a hybrid epithelium whose cells share characteristics of both gastric surface mucous cells and intestinal metaplastic cells. Whether all areas of incomplete intestinal metaplasia represent an intermediate stage between the normal gastric epithelium and the fully developed complete type of metaplasia remains to be determined.     

Structures and electronic properties of surface/edges of nanodiamond and nanographite

The structure, electronic and magnetic properties of nanodiamond and nanographite/nanographene are investigated. Detonation nanodiamond particles that are covered with amorphous graphitic composites are hydrothermally treated to remove the graphitic surface composites and to terminate the surface carbon atoms with hydrogen. The number of localized spins of dangling bonds and the hydrogen concentration increase upon the increase in the hydrothermal treatment time up to 40 h. Above 40 h, both drop discontinuously, a surface structural reconstruction was suggested. The creation of dangling bonds and an incomplete hydrogenation of the surface carbon atoms destabilize the surface, resulting in the structural reconstruction. Nanodiamond particles are thermally converted to nanographite/nanographene. A single nanographene sheet is successfully prepared by heat-treating nanodiamond particles. The edge of graphene sheet with its edge carbon atoms being hydrogen-terminated is investigated by UHV-STM/STS. Zigzag edges are found to have non-bonding π-state of edge origin, in good agreement with theoretical prediction.     

Piezoresistivities of vapor‐grown carbon fiber/silicone foams for tactile sensor applications

Due to the growing demand for tactile sensors, the possibility of detecting an external uniaxial pressure by the piezoresistive measuring of a conductive filler/elastomer composite was investigated. A series of piezoresistive models are discussed. Novel highly sensitive piezoresistive foams with excellent elasticity were fabricated using vapor‐grown carbon fiber (VGCF), two‐component silicone elastomer and a new type of thermally expandable micro beads foaming agent to overcome the disadvantages of the silicone elastomer in the utilization of a tactile sensor. Deformations of the foams caused by uniaxial pressure were observed using scanning electron microscopy from cross‐sections. Effects of the VGCF and the foaming agent on the piezoresistivitiy were investigated. The piezoresistive mechanisms of the foams are discussed according to the measurements, and good fit was found between the theoretical calculations and the experimental piezoresistivity measurements. It is found that the addition of the micro beads foaming agent can improve the piezoresistivity of the VGCF/silicone foam and increase the sensitivity and repeatability for its application in a tactile sensor. © 2016 Society of Chemical Industry     

Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

Euphorbia tirucalli β-Amyrin Synthase: Critical Roles of Steric Sizes at Val483 and Met729 and the CH–π Interaction between Val483 and Trp534 for Catalytic Action

The functions of Val483, Trp534, and Met729 in Euphorbia tirucalli β-amyrin synthase were revealed by comparing the enzyme activities of site-directed mutants against that of the wild type. The Gly and Ala variants with a smaller bulk size at position 483 predominantly afforded monocyclic camelliol C, which suggested that the orientation of the (3S)-2,3-oxidosqualene substrate was not appropriately arranged in the reaction cavity as a result of the decreased bulk size, leading to failure of its normal folding into the chair–chair–chair–boat–boat conformation. The Ile variant, with a somewhat larger bulk, afforded β-amyrin as the dominant product. Intriguingly, various variants of Trp534 exhibited significantly decreased enzymatic activities and provided no aberrantly cyclized products, although the aromatic Phe and Tyr residues were incorporated and the steric sizes of the aliphatic residues were altered. Therefore, the Trp534 residue does not stabilize the transient cation through a cation–π interaction. Furthermore, the Trp residue, with the largest steric bulk among all natural amino acids, is essential for high enzymatic activity. Robust CH–π complexation between the Val483 and Trp534 residues is proposed herein. Altering the steric bulk at the Met729 position afforded the pentacyclic skeletons. Thus, Met729 is positioned at the E-ring formation site. More detailed insights into the functions of the Val483, Trp534, and Met729 residues are provided by homology modeling.