Efficiency and effectiveness enhancement of an intercooler of two‐stage air compressor by low‐cost Al2O3/water nanofluids

The present study was aimed to utilize low‐cost alumina (Al₂O₃) nanoparticles for improving the heat transfer behavior in an intercooler of two‐stage air compressor. Experimental investigation was carried out with three different volume concentrations of 0.5%, 0.75%, and 1.0% Al₂O₃/water nanofluids to assess the performance of the intercooler, that is, counterflow heat exchanger at different loads. Thermal properties such as thermal conductivity and overall heat transfer coefficient of nanofluid increased substantially with increasing concentration of Al₂O₃ nanoparticles. Specific heat capacity of nanofluids were lower than base water. The intercooler performance parameters such as effectiveness and efficiency improved appreciably with the employment of nanofluid. The efficiency increased by about 6.1% with maximum concentration of nanofluid, that is, 1% at 3‐bar compressor load. It is concluded from the study that high concentration of Al₂O₃ nanoparticles dispersion in water would offer better heat transfer performance of the intercooler.     

Synthesis and characterization of morphologically different high purity gallium oxide nanopowders

High purity gallium oxide nanopowders have been synthesized by using a simple precipitation technique with calcination at elevated temperature. From the X-ray pattern, the phase purity of the synthesized powders was confirmed as β-Ga₂O_3. Elemental quantification (stoichiometry) of Ga₂O₃ was also examined from the X-ray energy dispersive analysis (EDAX). Based on the recorded Fourier Transform Infrared (FTIR) spectrum of Ga₂O_3, the IR bands due to Ga–O bond and crystal lattice vibrations have been identified in the wavenumber range 400–4,000 cm⁻¹. From the measured SEM images, it is obvious to notice that the pH value has been playing a dominant role in obtaining morphologically different gallium oxide nanopowders. Thermogravimetric analysis reveals 8.3% of weight loss when the sample was heated to the temperature of 1,100 °C from the room temperature, which also shows a crystalline phase transformation. It is very interesting to report that a broad blue emission at 455 nm has been measured from the synthesized gallium oxide nanopowders.     

Empirical approach to develop a multilayer icebonded abrasive polishing tool for ultrafine finishing of Ti-6Al-4V alloy

This paper covers the development of a multilayer icebonded abrasive polishing (IBAP) tool for multistage polishing of Ti-6Al-4V alloy specimens based on a systematic study that determined the number of layers, thickness of each layer, and the type, size and concentration of abrasives in each layer. Based on this study, a three-layered IBAP tool with the bottom layer consisting of soft aluminum oxide abrasives of 3?µm size with 5% concentration, the middle layer with moderately hard silicon carbide abrasives of 8?µm size with 10% concentration and the top layer with hard boron carbide abrasives of 15?µm size with 30% concentration was formulated for ultrafine finishing of Ti-6Al-4V alloy specimen in a single setup. The performance of the three-layered IBAP tool assessed in terms of finish and morphology over the work surface showed 81% improvement in surface finish, showing its effectiveness over a single-layered IBAP tool. Polishing studies have clearly demonstrated the generation of ultrafine surfaces, yielding a finish of 37?nm while the morphological studies on the polished surface have shown a nearly scratch-free surface on the Ti-6Al-4V alloy.     

Novel wet-chemical synthesis and characterization of nanocrystalline CeO2 and Ce0.8Gd0.2O1.9 as solid electrolyte for intermediate temperature solid oxide fuel cell (IT-SOFC) applications

Novel wet-chemical methods of synthesis have been adopted to synthesize nano-crystalline CeO₂ and Gd-substituted compositions aiming to explore an efficient oxide ion conducting solid electrolyte for intermediate temperature solid oxide fuel cell (IT-SOFC) applications. Nano-crystalline CeO₂ powders were synthesized by combustion method using redox mixture of cerric ammonium nitrate or cerium nitrate and maleic acid or 1,3-dimethylurea and compared with high surface area CeO₂ powders prepared by hydrothermal technique with microwave precipitated precursor from aqueous solutions of (NH₄)₂Ce(NO₃)₆ and urea. The grain size achieved by the hydrothermal technique is ∼7 nm which is smaller than that of commercial nano CeO₂ powders. Conventional or microwave sintering was used to prepare dense Ce_0.8Gd_0.2O_1.9 pellets from the ceria powders made of redox mixture of cerium nitrate, 1,3-dimethylurea (DMU) and Gd₂O₃ as the starting ingredients. The samples were characterized by X-ray diffractometry (XRD), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), and ac impedance spectroscopy. The ionic conductivity measured for the pellet sintered at 1400 °C is 1 × 10⁻² and 2.4 × 10⁻² S/cm at 700 °C and 800 °C respectively.     

Short communication: Identifying challenges and opportunities for improved nutrient management through the USDA's Dairy Agroecosystem Working Group

Nutrient management on US dairy farms must balance an array of priorities, some of which conflict. To illustrate nutrient management challenges and opportunities across the US dairy industry, the USDA Agricultural Research Service Dairy Agroecosystems Working Group (DAWG) modeled 8 confinement and 2 grazing operations in the 7 largest US dairy-producing states using the Integrated Farm System Model (IFSM). Opportunities existed across all of the dairies studied to increase on-farm feed production and lower purchased feed bills, most notably on large dairies (>1,000 cows) with the highest herd densities. Purchased feed accounted for 18 to 44% of large dairies' total operating costs compared with 7 to 14% on small dairies (<300 milk cows) due to lower stocking rates. For dairies with larger land bases, in addition to a reduction in environmental impact, financial incentives exist to promote prudent nutrient management practices by substituting manure nutrients or legume nutrients for purchased fertilizers. Environmental priorities varied regionally and were principally tied to facility management for dry-lot dairies of the semi-arid western United States (ammonia-N emissions), to manure handling and application for humid midwestern and eastern US dairies (nitrate-N leaching and P runoff), and pasture management for dairies with significant grazing components (nitrous oxide emissions). Many of the nutrient management challenges identified by DAWG are beyond slight modifications in management and require coordinated solutions to ensure an environmentally and economically sustainable US dairy industry.     

Design of Ultra-Wideband Monopulse Receiver

In this paper, we propose a novel amplitude-comparison monopulse receiver architecture for ultra-wideband radars. This monopulse receiver consists of four ridged-horn antennas placed in a square-feed configuration, a comparator circuit that generates the monopulse sum and difference signals, cross-correlation receivers that detect the monopulse signals, and an amplitude-comparison monopulse processor that determines the target's angular position. The derived monopulse sum and difference signals are verified through measurements. The derived sum and difference patterns are compared with measured patterns, and they show good agreements-measured 3-dB beamwidth=6.4deg(derived=6deg), measured unambiguous tracking range=plusmn5deg(derived=plusmn5deg), and measured sum pattern sidelobe level=-6 dB (derived=-8 dB)     

Design of an integrated UWB antenna with dual band notch characteristics

A miniaturized couple-line-fed planar ultra-wideband (UWB) antenna is proposed, which has a dual band-notched characteristic as well as two integrated monopoles. Narrowband notches are generated at frequencies of 3.5 GHz and 5.5 GHz using independently controlled bent resonators, whereas the monopoles are designed for radiation at 900 MHz and 2.4 GHz. The proposed design is simulated with full wave solvers and verified with measurements. A good agreement is observed between the simulations and measurements for the antenna's return loss, gain and radiation pattern performances.     

A wide-ranging review on Nasicon type materials

Nasicons (sodium super ion conductors) are a class of solid electrolytes. Their structure, compositional diversity, evolution, and applications are reviewed. A wide range of materials is considered based on crystalline and glassy Nasicon compositions.