IEVCA: An efficient image encryption technique for IoT applications using 2-D Von-Neumann cellular automata

Multimedia Tools and Applications - Present era is marked by exponential growth in transfer of multimedia data through internet. Most of the Internet-of-Things(IoT) applications send images to...     

An improved transport layer protocol for wireless sensor networks

Wireless sensor networks (WSNs) are a kind of communication networks having independent sensor nodes that form multi-hop ad hoc network to transfer data. In the past few years, various transport control protocols in wireless sensor networks (WSNs) have been developed and proposed in the literature. In this paper, we have analyzed pump slowly, fetch quickly (PSFQ) protocol and presented an improved transport layer protocol for wireless sensor networks. The improved protocol has been analyzed based on various factors such as average latency and average error tolerance and it is found that the proposed protocol is better than PSFQ in terms of these factors.     

Dry beans of Phaseolus. A review. Part 2. Chemical composition: carbohydrates, fiber, minerals, vitamins, and lipids

Beans of Phaseolus are an important food crop both economically and nutritionally, and are cultivated and consumed worldwide. With ever rising costs of meats and fresh fruits and vegetables, dry beans are expected to contribute more to the human nutrition in coming years. Traditionally, they have been referred to as "poor man's meat" and have contributed significantly to the diets of many people of several countries in Asia, Africa, Middle East, and South America. In recent years, a renewed interest in bean research in Western European countries and the U.S. is evident. In this review, certain biochemical, technological, nutritional, and toxicological aspects are discussed and the limitations and problems associated with dry beans of Phaseolus as human food are addressed.     

Influence of Electric Poling on Pb0.9Bi0.1Fe0.55Nb0.45O3 Multiferroic

This paper analyzes the influence of electric poling on structure, magnetism, and ferroelectricity by temperature-dependent Raman scattering (180 K–500 K), magnetic susceptibility, and ferroelectric measurements on Pb_0.9Bi_0.1Fe_0.55Nb_0.45O₃ (PBFNO) multiferroic. X-ray diffraction (XRD) has confirmed the monoclinic structure for PBFNO sample before and after poling. Rietveld refined XRD for poled and unpoled sample shows the influence of electric poling on Fe-O1, Fe-O2, Nb–O, and Bi-O modes with small variation in the lattice parameters. The unpoled PBFNO exhibits broad and overlapping 10 active modes at room temperature (100 to 1300 cm^?1) at 147, 212, 255, 431, 479, 561, 700, 795, 835, and 1112 cm^?1. In case of a poled sample, Pb–O and Nb–O-Nb modes become more active compared to the unpoled sample. Changes observed in the temperature-dependent magnetic measurements, i.e., ZFC/FC and M-H loop, evidence the poling effects on Fe–O and Nb–O active modes. By poling the improvement in ferroelectric domain, ordering occurs, and it is confirmed by P-E loops. The consequences of numerous investigations on electric poling of PBFNO will provide the foundation for future device development and design.

     

Renewable hydrogen generation by steam reforming of glycerol over zirconia promoted ceria supported catalyst

The study focuses on hydrogen production from steam reforming of glycerol over nickel based catalyst promoted by zirconia and supported over ceria. Catalyst was prepared by the wet-impregnation method and characterized by BET surface area analysis, X-ray diffraction technique and scanning electron microscopy (SEM) analysis. The performance of the catalyst was evaluated in terms of hydrogen yield, selectivity and glycerol conversion at 700 °C in a tubular fixed bed reactor. The effect of glycerol concentration in feed, space time (W/F_AO), temperature and time on stream (TOS) was analyzed for the catalyst Ni–ZrO₂/CeO₂ which showed the complete conversion of glycerol and high H₂ yield that corresponds to 3.95 mol of H₂ out of 7 mol. Thermodynamic analysis was also carried out using Aspen HYSYS for system having glycerol concentration 10 wt% and 20 wt% and experimental results were compared with thermodynamics. Kinetic study was carried out for the steam reforming of glycerol over Ni–ZrO₂/CeO₂ catalyst using the power law model. The values of activation energy and order of reaction were found to be 43.4 kJ/mol and 0.3 respectively.     

Development and evaluation of orally disintegrating tablets of cilostazol-β-cyclodextrin inclusion complexes

Context: The clinical applications of cilostazol (CLZ) are limited by its low aqueous solubility (<5?µg/ml) and high biovariability.

Objective: The aim of this study was to enhance the solubility of CLZ by forming inclusion complexes (ICs) with beta cyclodextrin (β-CD) and formulating them into oral disintegrating tablets.

Methods: Phase solubility study of CLZ with β-CD was performed in water. Job’s plot was constructed to determine the stoichiometry of ICs. ICs, prepared by spray-drying technique, were characterized using Fourier transform infrared spectroscopy, differential scanning calorimetry, hot stage microscopy, powder X-ray diffraction and nuclear magnetic resonance. Molecular modeling studies were performed to understand the mode of interaction of CLZ with β-CD. The formulation process was undertaken using a reproducible design of experiment generated model, attained by variation of diluents and disintegrants at three levels. Tablets were evaluated for drug content, hardness, friability, disintegration time (DT), wetting time (WT) and dissolution profiles.

Results and discussion: Phase solubility studies suggested an A_L type curve with stability constant (K_s) of 922.52?M^?1. Job’s plot revealed 1:2 stoichiometry. All analytical techniques confirmed inclusion complexation. Molecular modeling revealed dispersive van der Waals interaction energy as a major contributor for stabilization of complex. The spray-dried complexes showed higher solubility and faster dissolution compared to plain CLZ. The optimized formulation showed DT of 11.1?±?0.8?s, WT of 8.7?±?0.9?s and almost complete dissolution of CLZ in 15?min.

Conclusion: The prepared tablets with low DT and fast dissolution will prove to be a promising drug delivery system with improved bioavailability and better patient compliance.     

Relationship between morphology and mechanical properties of binary and compatibilized ternary blends of polypropylene and nylon 6

The effect of compatibilization on the morphology, mechanical properties, and dynamic mechanical properties of isotactic polypropylene (IPP)/nylon-6 (Ny-6) binary blends was investigated. Maleic anhydride (MAH) functionalized IPP was used as a compatibilizer in binary blends. The morphological, mechanical, and dynamic mechanical properties of binary and ternary blends were compared. The blends containing IPP-g-MAH showed more regular and finer dispersion of phases, different dynamic properties, and improved mechanical properties due to better adhesion between the two phases. The blends were also characterized for their flow properties and extent of water absorption. The melting peak temperature and percent crystallinity of IPP and Ny-6 phases were decreased in compatibilized blends. © 1996 John Wiley & Sons, Inc.     

Studies on hexagonal cadmium selenide thin film deposited by chemical route using ascorbic acid

We have successfully deposited cadmium selenide (CdSe) thin films by simple dip method using ascorbic acid as complexing agent. Variation of thickness with time and temperature were studied. Deposited samples were characterized by X-ray diffraction, scanning electron microscopy. The absorption, electrical and photoelectrochemical properties are also studied. The X-ray diffraction analysis shows that the film samples are in hexagonal structure. The optical band gap energy was found to be 1.70 eV. Activation energy was found to be 0.447 and 0.034 eV for higher temperature and lower temperature respectively. For CdSe photoelectrode, the open circuit voltage and short circuit current are found to be 267 mV and 175 mA respectively. The calculation shows the fill factor is 28.67 %. The power conversion efficiency is found to be 1.01 %.