Time Decay of the Activity of the Reduction Reaction of NO by CO on a Pd/Al2O3 Catalyst

An experimental study is made of the time decay of activity of the CO–NO reaction on a Pd/Al₂O₃ looking at the effect on reaction order and apparent activation energy. The optimum kinetics parameters fitting the steady state data at moderate pressures are determined. The time decay curves are analyzed through various catalyst deactivation models.     

Shumbler: a 155 Mb/s BiCMOS synchronous multiplexer chip for abroad-band customer premises network

The shumbler (shuffler/scrambler) is a circuit designed and fabricated to form part of a broadband customer premises network. The circuit is implemented in 1.2-μm BiCMOS double-metal technology. The circuit is bidirectional, and can perform the functions of scrambling and shuffling or descrambling and unshuffling by means of control signals to three integrated multiplexers. The shumbler also includes a programmable multiplexer that allows the selection of one out of the 16 output channels of the shuffler through a serial output for local system test purposes. The shumbler circuit interfaces emitter-coupled-logic (ECL) and transistor-transistor-logic (TTL) logic levels using a single power supply of -5 V, dissipating 1.5 W, and encapsulated in a 68-pin LCC package with a flat heat spreader which ensures a thermal resistivity of about 10°C/W     

Information Visualization Within a Digital Video Library

The Informedia Digital Video Library contains over a thousand hours of video, consuming over a terabyte of disk space. This paper summarizes the multimedia abstractions used to represent this video in prior systems and introduces the visualization techniques employed to browse and navigate multiple video documents at once.     

Pitfalls of protein sequence analysis

Thirteen patients who developed restrictive subdeltoid adhesions after rotator cuff repair were identified. These patients underwent second-look arthroscopy and takedown of adhesions at an average of 37 weeks after their index surgery. Clinical findings include pain and restricted motion that does not yield to manipulation under anesthesia. Arthroscopic findings are subdeltoid adhesions and a chondral lesion (companion lesion) of the humeral head articular surface. Patients were reevaluated at 26 weeks after their release of adhesions. Prerelease and postrelease University of California, Los Angeles (UCLA) scores average 14.8 and 30.1, respectively. Prerelease and postrelease UCLA pain scores averaged 2.6 and 7.7, respectively. Prerelease and postrelease range of motion was as follows: Flexion, 141/158; abduction, 123/141; internal rotation, 47/69; and external rotation, 53/74. The authors have proposed a theory to explain the clinical and arthroscopic findings in this subgroup of patients who are dissatisfied after rotator cuff repair. A technique for and the results of release of the subdeltoid adhesions also are reported.     

From LTL to unambiguous Büchi automata via disambiguation of alternating automata

Formal Methods in System Design - Due to the high complexity of translating linear temporal logic (LTL) to deterministic automata, several forms of “restricted” nondeterminism have been...     

Cation Effect on the Binary and Ternary Phase Behaviors of Double-Tailed Methanesulfonate Amphiphiles

A series of symmetrical dialkyl methanesulfonate amphiphiles [DiC _n CHSO ₃ ] _m M (n = 6, 7, 8) with different counter cations (M^m+ = H⁺, Li⁺, Na⁺, K⁺, Cu²⁺, Zn²⁺, Mg²⁺, Ca²⁺, Sc³⁺) were synthesized in five steps. Their solubility and critical micelle concentration (CMC) in water were determined highlighting a huge effect of the chain length and the nature of the cation. The hydrophilic–lipophilic balance of the surfactants were assessed with the phase inversion temperature (PIT)-slope method based on the deviation from the PIT of the reference C₁₀E₄/n-octane/0.01 M NaCl_(aq) emulsion through addition of increasing amounts of the dialkyl methanesulfonates. The hydrophilicity of the surfactants was thus ranked in terms of dPIT/dx_sulfonate. A “cation” scan with the [DiC ₆ CHSO ₃ ] _m M /benzene/water systems at f_w = 0.5 was finally performed confirming the hydrophilicity ranking obtained with the PIT-slope method. It revealed that the [DiC ₆ CHSO ₃ ] ₂ Mg behaves as a “Balanced Surfactant” able to form spontaneously a three-phase microemulsion system (Winsor III) just in the presence of water and oil, in the same way as the catalytic surfactant dimethyldioctylammonium molybdate, which has the same PIT-slope.     

Tensile mechanical properties of sulfonated poly(ether ether ketone) (SPEEK) and BPO4/SPEEK membranes

A study to evaluate the tensile mechanical properties of sulfonated poly(ether ether ketone) (SPEEK) and BPO₄/SPEEK composite membranes has been carried out. It is aimed to give an assessment of these materials for applications in proton exchange membrane fuel cells. The stress–strain response of the membranes was measured as a function of the degree of sulfonation (DS) and the filler–matrix ratio. In addition, the effects of immersion in water at various temperatures were explored in situ by means of a homemade testing chamber fitted to the tensile analyzer. The results indicate that the DS has an important influence on the final mechanical behavior of the membranes. The introduction of the BPO₄ solid filler leads to deterioration in mechanical performance compared to unfilled SPEEK. A general picture of the microstructural features influencing the mechanical properties of SPEEK and BPO₄/SPEEK membranes is proposed. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2380–2393, 2005     

Polymerization and characterization of ethylene/propylene and ethylene/1-octene copolymers produced with bridged Zr- and Hf-based metallocenes

Ethylene/propylene (E/P) and ethylene/1-octene (E/O) copolymers were polymerized with two bridged metallocene catalyst systems, Et(Ind)₂ZrCl₂/MAO and Et(Ind)₂HfCl₂/MAO, respectively. The copolymers produced and some commercial reference copolymers were characterized by DSC, SEC, DMA and ¹³C NMR. The Hf-catalysed E/P polymerizations showed much lower activities than the corresponding Zr-catalysed polymerizations but gave polymers with high molar mass. The Hf-based copolymers also showed two melting peaks which may be indicative of several active sites of the catalyst. A comparison of E/P copolymers, containing about 20 mol-% propylene and produced with Zr, Hf and homogeneous V-catalysts, respectively, indicated that the Hf and V-catalysts gave material more similar to each other. The E/O copolymers produced with Zr-catalysts gave very low molar masses and the reactivity ratios, calculated from the NMR data, indicated that the Hf-catalyst has a slightly higher reactivity for 1-octene and the Zr-catalyst some better reactivity for ethylene. Segregation fractionation studies by DSC indicated that a lower 1-octene feed gives more heterogeneous copolymers and the DMA measurements reveal the existence of a linear correlation between the 1-octene content and the intensity of the tan δ_max peak.