A new family of sugar-inducible expression vectors for Escherichia coli

A set of 11 expression vectors was constructed, each of themharbouring a cloning cassette under the control of the promoter.Some of these vectors enable expression of foreign proteinsin the cytoplasm, while others include a synthetic sequencecoding for a very efficient secretion signal sequence. Otherfeatures are an fl origin of replication (in plus or minus orientation)and a promoter^up mutation that enhances the already very highlevel of expression from these vectors. With such a versatilevector family, cloning, sequencing and sitedirected mutagenesiscan be performed on the same vector, and the level of expressioncan be defined according to the specific constraints of a givenprotein.     

Magnetic separations in biotechnology—a review

Magnetic separation technology has a broad range of potential applications in both small and large scale biotechnology. This review considers a selection of magnetic techniques and their possible uses.     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0·24 w/o copper, but different nickel contents at 0·63 w/o and 0·19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 982°C (1800°F)) and to simulate Regulatory Guide 1·99 database materials (austenitized at 871°C (1600°F)). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (University of Michigan Test Reactor) which had never been used before for this type of irradiation program. Materials taken from plate surface locations (versus 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, are maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (260°C and 288°C) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an average temperature effect of 38°C for a 28°C difference in irradiation temperature. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel has little effect on irradiation response. No apparent microstructure effect on irradiation response was noted and the HSST-02 material's response to irradiation was similar to results from power reactor and other test reactor tests, thus qualifying the Ford Test Reactor for irradiation experiments such as those conducted for the Yankee Atomic program.     

SeaDoc: a self-adaptive document link provision system for framework extension tasks

It has been demonstrated that object-oriented frameworks can bring all kinds of advantages to application developers. To gain the advantages, application developers have to follow the framework-based development process. One step of the process is to integrate new components for framework extension. This is defined as a framework extension task in this work. In this task, application developers have to (1) retrieve examples, (2) acquire necessary documents, which are defined as the documents containing example adaptation information, and (3) adapt examples. Currently, acquiring necessary documents requires a lot of time because it is achieved through manually searching the Internet. Although there are many approaches to correctly acquiring those documents, the focus is never on time reduction. To satisfy the new criterion, we find the following challenging issues: (1) the dynamics of the valid document version, and (2) the uncertainty of the relevant necessary documents. The first issue is that the valid document version varies according to the framework version under which the retrieved example is workable. The second one is that the relevant necessary documents cannot be decided until a specific necessary document is specified. To resolve those two issues, a Self-adaptive Document link provision system, named SeaDoc, is provided in this work. SeaDoc resolves the dynamics by dynamically constructing document links with the corresponding valid document version. SeaDoc also resolves the uncertainty by adaptively selecting highly relevant document links. The experimental results show that SeaDoc reduces the time by 73 and 83 % compared with other two approaches.     

The cholesterol-lowering effect of guar gum is not the result of a simple diversion of bile acids toward fecal excretion

The effects of partially hydrolyzed, nonviscous, guar gum (PHGG) on cholesterol metabolism and digestive balance have been compared with those of native guar gum (GUAR) in rats adapted to 0.4% cholesterol diets. Both types of guar gum elicited acidic fermentations in the large intestine, but only GUAR effectively lowered plasma cholesterol (P<0.001), chiefly in the triglyceride-rich lipoprotein fraction. The biliary bile acid excretion was significantly enhanced in rats fed GUAR (P<0.05), as well as the intestinal and cecal bile acid pool (P<0.001). In rats fed GUAR and to a lesser extent in those fed PHGG, the fecal excretion of bile acids and neutral sterol was higher than in controls (P<0.01). The digestive balance (cholesterol intake-steroid excretion) was positive in control rats (+47 μmol/d), whereas it was negative in rats fed GUAR (−20 μmol/d), which could involve a higher rate of endogenous cholesterol synthesis. In rats fed PHGG, the steroid balance remained slightly positive. Liver 3-hydroxy-3-methylglutaryl-CoA (HMG-CoA) reductase activity was very low (22 pmol/min/mg protein), owing to cholesterol supplementation, in control rats or in rats fed PHGG, whereas it was markedly higher (+463%) in rats fed GUAR. In conclusion, even if PHGG does alter some parameters of the enterohepatic cycle of cholesterol and bile acids, its effects are not sufficient to elicit a significant cholesterol-lowering effect. The intestinal (ileal or cecal) reabsorption of bile acids was not reduced, but rather increased, by GUAR; nevertheless the intestinal capacities of reabsorption were overwhelmed by the enlargement of the digestive pool of bile acids. In the present model, induction of HMG-CoA reductase probably takes place in the presence of elevated portal bile acid concentrations.     

Developing authentic assessment: Case studies of secondary school mathematics teachers’ experiences

Abstract

Authentic assessment techniques in mathematics raise issues that merit the attention of practitioners, educators, and researchers. Teacher training in assessment, the reliability and validity of authentic assessment, the variety of methods employed in such assessment, and the ways assessment is employed are all concerns that emerge as new assessment techniques other than the expected paper‐and‐pencil tests are implemented. At the secondary school level, new assessment techniques are emerging in mathematics classrooms and little is known about these experiences. This article specifically addresses the issues associated with authentic assessment by describing and exploring mathematics teachers’ experiences as they implement these assessment techniques in their secondary school mathematics program. It summarizes the findings of a qualitative study of five secondary school mathematics teachers in Ontario, Canada, and offers suggestions as to how to support teachers through such a change project. How teachers use authentic assessment, the problems they encounter, and the theoretical and practical issues that emerge are all questions that require exploration and understanding.     

Experimental analysis and numerical modelling of the forming process of polypropylene replicas of micro-cavities using hot embossing

Numerical modelling of the deformation of a polymer using the finite elements method in axisymetrical mode was performed using the LsDyna^® software to describe the filling of micro-cavities during the forming process of the material using the hot embossing. These simulations firstly allow verifying whether the chosen forming process conditions promote or not an optimized filling of the superficial cavities in order to achieve precise replicas which best reproduce the superficial topography of the mould. The simulations were carried out to evaluate the filling of the cavities taking into account the mechanical behaviour of the selected polymer into the model. Moreover, these models were developed to verify the effect of the distribution of the mould cavities on their filling. The influence of the mobility of non deformable rigid plates on the filling of the cavities represents an auxiliary variable. In the approach presented, the compression plates are assumed to be parallel and non deformable, whereas the polymer disk follows a rubbery behaviour around a temperature equal to 140°C. Globally the modelling results are satisfactory for they are rather close to the experimental observations conducted. In summary, the effect of the normal stress as also the distribution of micro-cavities at the mould surface seem to prevail in the case of the forming process by hot embossing.     

Human pathogenic streptococcal proteomics and vaccine development

Gram-positive streptococci are non-motile, chain-forming bacteria commonly found in the normal oral and bowel flora of warm-blooded animals. Over the past decade, a proteomic approach combining 2-DE and MS has been used to systematically map the cellular, surface-associated and secreted proteins of human pathogenic streptococcal species. The public availability of complete streptococcal genomic sequences and the amalgamation of proteomic, genomic and bioinformatic technologies have recently facilitated the identification of novel streptococcal vaccine candidate antigens and therapeutic agents. The objective of this review is to examine the constituents of the streptococcal cell wall and secreted proteome, the mechanisms of transport of surface and secreted proteins, and describe the current methodologies employed for the identification of novel surface-displayed proteins and potential vaccine antigens.