A unified and flexible solution for integrating CRL and OCSP into PKI applications

Public key certificates (PKCs) are used nowadays in several security protocols and applications, so as to secure data exchange via transport layer security channels, or to protect data at the application level by means of digital signatures. However, many security applications often fail to manage properly the PKCs, in particular when checking their validity status. These failures are partly due to the lack of experience (or training) of the users who configure these applications or protocols, and partly due to the scarce support offered by some common cryptographic libraries to the application developers. This paper describes the design and implementation of a light middleware dealing with certificate validation in a unified way. Our middleware exploits on one side the libraries that have already been defined or implemented for certificate validation, and it constructs a thin layer, which provides flexibility and security features to the upper layer applications. In our current approach, this layer boasts an integrated approach to support various certificate revocation mechanisms, it protects the applications from some common security attacks, and offers several configuration and performance options to the programmers and to the end users. We describe the architecture of this approach as well as its practical implementation in the form of a library based on the famous OpenSSL security library, and that can be easily integrated with other certificate‐aware security applications. Copyright © 2009 John Wiley & Sons, Ltd.     

Efficient photochromic transformation of a new fluorenyl diarylethene: one- and two-photon absorption spectroscopy

Efficient reversible phototransformation of a new diarylethene-fluorene derivative, 1,2-bis(5-(9,9-didecyl-7-nitro-9H-fluoren-2-yl)-2-methylthiophen-3-yl)cyclopent-1-ene (1), was demonstrated in organic media under low-intensity laser excitation. Linear photophysical characterization of 1 was performed at room temperature in solvents of different polarity and viscosity. Significantly, close to unity quantum yield for the cyclization reaction of 1 was shown in nonpolar solutions. The lifetimes of the excited states of the open (OF) and closed (CF) forms of 1 were measured by a femtosecond transient absorption technique, and corresponding values of ～0.7 and ～0.9 ps were shown in dichloromethane (DCM), respectively. Degenerate two-photon absorption (2PA) spectra of the OF and CF of 1 were obtained over a broad spectral range by the open aperture Z-scan method under 1 kHz femtosecond excitation. The values of 2PA cross sections of the OF in DCM (～50-70 GM) were found to increase up to 1 order of magnitude (～600 GM) after cyclization to the CF. The nature of cyclization and cylcoreversion processes were investigated by quantum chemistry with employment of DFT-based methods implemented in the Gaussian'09 program. The potential of 1 for application in optical data storage was shown using poly(methyl methacrylate)-doped films and two-photon fluorescence microscopy readout.     

Specific Local Predictors That Reflect the Tropism of Endometriosis—A Multiple Immunohistochemistry Technique

Ectopic endometrial epithelium associates a wide spectrum of symptomatology. Their evolution can be influenced by inflammatory and vascular changes, that affect not only the structure and cell proliferation rate, but also symptoms. This prospective study involved tissue samples from surgically treated patients, stained using classical histotechniques and immunohistochemistry. We assessed ectopic endometrial glands (CK7+, CK20−), adjacent blood vessels (CD34+), estrogen/progesterone hormone receptors (ER+, PR+), inflammatory cells (CD3+, CD20+, CD68+, Tryptase+), rate of inflammatory cells (Ki67+) and oncoproteins (BCL2+, PTEN+, p53+) involved in the development of endometriosis/adenomyosis. A CK7+/CK20− expression profile was present in the ectopic epithelium and differentiated it from digestive metastases. ER+/PR+ were present in all cases analyzed. We found an increased vascularity (CD34+) in the areas with abdominal endometriosis and CD3+−:T-lymphocytes, CD20+−:B-lymphocytes, CD68+:macrophages, and Tryptase+: mastocytes were abundant, especially in cases with adenomyosis as a marker of proinflammatory microenvironment. In addition, we found a significantly higher division index-(Ki67+) in the areas with adenomyosis, and inactivation of tumor suppressor genes-p53+ in areas with neoplastic changes. The inflammatory/vascular/hormonal mechanisms trigger endometriosis progression and neoplastic changes increasing local pain. Furthermore, they may represent future therapeutic targets. Simultaneous-multiple immunohistochemical labelling represents a valuable technique for rapidly detecting cellular features that facilitate comparative analysis of the studied predictors.     

Structural,dielectric, and piezoelectric properties of fine-grained NBT–BT0.11 ceramic derived from gel precursor

(Na_1/2Bi_1/2)TiO₃ doped in situ with 11 mol% BaTiO₃ (NBT–BT_0.11) powders were synthesized by a sol–gel method, and the electrical properties of the resulting ceramics were investigated. The powders consisting of uniform and fine preliminary particles of about 50 nm were prepared by calcining the gel precursor at 700 °C. (Na_1/2Bi_1/2)_0.89Ba_0.11TiO₃ ceramics, sintered at temperatures up to 1150 °C have a rhombohedral symmetry, while the ceramic sintered at 1200 °C exhibits a tetragonal crystalline structure. The ceramics show high dielectric constant (?_r ～ 5456), dielectric loss of 0.02, depolarization temperature T_d ～ 110 °C and temperature corresponding to the maximum value of dielectric constant T_m ～ 262 °C. The dielectric constant (?₃₃) and the piezoelectric constant (d₃₃) attain the maximum values of 924 and 13 pC/N, respectively, while the electromechanical coupling factor (k_p) value is 0.035. The NBT–BT_0.11 ceramics derived from sol–gel present high mechanical quality factor (Q_m ～ 860). The dielectric and piezoelectric properties values of NBT–BT_0.11 ceramics derived from sol–gel are smaller than those of samples produced by the conventional solid state reaction method, due to the grains size and oxygen vacancies that generate dipolar defects.     

Synthesis and dielectric characterization of Ba0.6Sr0.4TiO3 ferroelectric ceramics

Ferroelectric ceramics Ba_0.6Sr_0.4TiO₃ (BST 40) were prepared, by solid-state reaction in the temperature range 1210-1450 °C. Maximum values of the ceramic densities were around 94% of their theoretical value. X-ray diffraction techniques (XRD) and scanning electron spectroscopy (SEM) were used to analyze the structure and the surface morphology of ceramics. Rounded, well defined or abnormal granular growth was observed in the SEM images, vs. sintering conditions and purity of the raw materials. In all samples, BST 40 ceramic is the major phase, but there are also present small amounts of secondary phases, as revealed in XRD diffraction patterns. Permittivity and dielectric loss measurements were performed in the temperature range − 150 to + 150 °C, and 150 Hz-5 MHz frequency values. Permittivity values rising from 1200 to 12,500, with increasing sintering temperatures, were recorded. Narrow and well defined transition peaks were noticed at higher sintering temperatures. Curie temperature was around 2 °C, for samples with the mentioned composition. Permittivity and losses vs. frequency show different behavior whether BST ceramics are in polar or non-polar state and with the distance toward phase transition. Microwave measurements performed at room temperature have shown lower values of permittivity, compared with similar data at low frequency, and dielectric losses lower than 1% at 0.7 GHz. The sintering conditions (temperatures, sintering time, etc.) and purity of the raw materials lead to important changes of transition temperatures in the polymorphic diagram, which we have built—for the other Ba1−xSrxTiO3 compositions (x = 0.25-0.90) sintered at 1260 °C for 2 h.     

Providing digital identity and academic attributes through European eID infrastructures: Results achieved,limitations, and future steps

Electronic identity is getting an increased importance nowadays since relentless digitalization and 24/7 connectivity continue to transform everyday life. To support the recognition of electronic identification cross-border within the European Union, the European Commission (EC) released the eIDAS Regulation, which became effective on September 2018. To put eIDAS in practice, the EC has supported the definition of the technical specification; it provides a sample implementation; and it coordinates the eIDAS Network composed of eIDAS nodes of various countries. Each eIDAS node has a generic part required for the communication with the other nodes, and a specific part that each country has to modify independently according to its legal, operational, and technical requirements. Although this specific part is very important because it affects the node flexibility and the interaction with the other actors at the national level, it is less known in practice. We describe the adaptation of this specific part in Italy to perform authentication and provision of attributes through the STORK and STORK 2.0 infrastructures (the predecessors of eIDAS), based on our experience in the homonym projects. Significant effort is spent currently to build real services exploiting the eIDAS infrastructure, eg, the eID4U project proposes eIDAS node extension with new attributes required by some common academic services, such as student registration at a foreign university. We describe the support for these new attributes in the eIDAS nodes and the modification of the specific part of the Italian eIDAS node to allow attributes retrieval from different authorities.     

Exploiting the European Union trusted service status list for certificate validation in STORK: design,implementation, and lessons learnt

Since December 2009, the European Union Trusted Service Status Lists (TSLs) have been specified and adopted across European Union countries in order to enable the verification of digital signatures with legal values. This paper deals with the exploitation of TSLs in real digital services, other than electronic signatures, that is for certificate validation service. In particular, we used such lists in the service provided by the pan‐European Secure identTities acRoss boRders linKed identity management infrastructure in order to validate X.509 public key certificates. In addition, we propose an XML data structure to be used in conjunction with a TSL, in the form of a Trust Service Association (TrSA) file, to hold trust relationships between different services in a TSL. The TrSA file in conjunction with the TSLs may be used directly by the service providers or users to validate certificates. For the generation of the TSLs, we propose also a tool for automatic generation of the TSLs, named TSLGenerator. Copyright © 2014 John Wiley & Sons, Ltd.     

Transitions of barium strontium titanate ferroelectric ceramics for different strontium content

Ceramic based barium strontium titanate (BST) solid solutions with the formula Ba_1 − xSr_xTiO₃ are very important candidates for a wide range of device applications. Several doped (Mn and Mg) and undoped samples were prepared by standard solid-state reaction. Special emphasis was put on compositions with x = 0.35 and 0.60, with high potential for applications. The samples were sintered at temperatures in the 1200 ÷ 1260 °C range. Structural X-ray diffraction analysis preformed confirms the perovskite structure. The dielectric parameters were investigated in a wide temperature range between − 150 and 150 °C. The temperature was cyclically changed in both directions, up and down, at a rate of less than 2 °C/min. Both permittivity and dielectric loss were measured at low frequencies, 1 kHz. The peak values of the permittivity are increasing from 2000 to 4000 with the sintering temperature increase. Moreover the dielectric parameters were measured at room temperature in microwave domain (1 ÷ 2 GHz). The Curie temperature of BST samples with x = 0.35 and x = 0.6 is in agreement with the Curie point dependence on Sr content, as we have previously reported.     

Three-dimensional nanostructures as highly efficient generators of second harmonic light

Plasmonic nanostructures enable the generation of large electromagnetic fields confined to small volumes, potentially providing a route for the development of nanoengineered nonlinear optical media. A metal-capped hemispherical nanoparticle, also known as a nanocup, generates second harmonic light with increasing intensity as the angle between the incident fundamental beam and the nanocup symmetry axis is increased. Nanoparticle orientation also modifies the emission direction of the second harmonic light. With conversion efficiencies similar to those of inorganic SHG crystals, these structures provide a promising approach for the design and fabrication of stable, synthetic second-order nonlinear optical materials tailored for specific wavelengths.