Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.     

Polyimides containing 4,4′‐bipyridinium units

New polyimides containing 4,4′‐bipyridinium units were synthesized by the reaction of bis(dichloromaleimide)arylene derivatives with 4,4′‐bipyridine in meta‐cresol. IR and ¹H‐NMR spectroscopy and elemental analysis as well confirmed their structures. The polymers were characterized by viscometric measurements, softening points, and thermogravimetric data. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2091–2100, 2004     

Parametric study for the growth of carbon nanotubes by catalytic chemical vapor deposition in a fluidized bed reactor

Multiwalled carbon nanotubes have been produced from H₂-C₂H₄ mixtures on Fe-SiO₂ catalysts by a fluidized bed catalytic chemical vapor deposition process. Various parameters such as the catalyst preparation, the residence time, the run duration, the temperature, the H₂:C₂H₄ ratio, the amount of metal deposited on the support have been examined. The influence of these parameters on the deposited carbon yield is reported, together with observations of the produced material. This process allows an homogeneously distributed deposition of nanotubes (10-20 nm diameter), that remain anchored to the support.     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).     

Observer-based predictive controller design with network-enhanced time-delay compensation

State feedback control is very attractive due to the precise computation of the gain matrix, but the implementation of a state feedback controller is possible only when all state variables are directly measurable. This condition is almost impossible to accomplish due to the excess number of required sensors or unavailability of states for measurement in most of the practical situations. Hence, the need for an estimator or observer is obvious to estimate all the state variables by observing the input and the output of the controlled system. As such, the goal of this paper is to provide a control design methodology based on a Luenberger observer design that can assure the closed-loop performances of a vehicle drivetrain with backlash, while compensating the network-enhanced time-varying delays. This goal is achieved in a sequential manner: firstly, a piecewise linear model of two inertias drivetrain, which takes into consideration the backlash nonlinearity and the network-enhanced time-varying delay effects is derived; then, a Luenberger observer which estimates the state variables is synthesized and the robust full state-feedback predictive controller based on flexible control Lyapunov functions is designed to explicitly take into account the bounds of the disturbances caused by time-varying delays and to guarantee also the input-to-state stability of the system in a non-conservative way. The full state-feedback predictive control strategy based on the Luenberger observer design was experimentally tested on a vehicle drivetrain emulator controlled through controller area network, with the aim of minimizing the backlash effects while compensating the network-enhanced delays.     

Process and learning outcomes from remotely-operated,simulated, and hands-on student laboratories

A large-scale, multi-year, randomized study compared learning activities and outcomes for hands-on, remotely-operated, and simulation-based educational laboratories in an undergraduate engineering course. Students (N = 458) worked in small-group lab teams to perform two experiments involving stress on a cantilever beam. Each team conducted the experiments in one of three lab formats (hands-on, remotely-operated, or simulation-based), collecting data either individually or as a team. Lab format and data-collection mode showed an interaction, such that for the hands-on lab format learning outcomes were higher when the lab team collected data sets working as a group rather than individually collecting data sets to be combined later, while for remotely-operated labs individual data collection was best. The pattern of time spent on various lab-related activities suggests that working with real instead of simulated data may induce higher levels of motivation. The results also suggest that learning with computer-mediated technologies can be improved by careful design and coordination of group and individual activities.     

Skin Inflammation Modulation via TNF-α, IL-17, and IL-12 Family Inhibitors Therapy and Cancer Control in Patients with Psoriasis

The systemic inflammatory syndrome concept is one of the foundations that stand at the basis of revolutionary modern and future therapies, based on the in-depth understanding of the delicate mechanisms that govern the collaboration between the systems and organs of the human body and, at the same time, the fine balance that ensures a reproach-free operation. An interesting concept that we propose is that of the environment-inadequacy status, a concept that non-specifically incorporates all the situations of the organism’s response disorders in the face of imprecisely defined situations of the environment. The correlation between these two concepts will define the future of modern medicine, along with the gene-adjustment mechanisms. Psoriasis is a clear example of an inadequate body response as a result of exposure to as of yet undefined triggers with an excessive systemic inflammatory reaction and hitherto insufficiently controllable. Modern biological therapies, such as TNF-α, IL-12 family, and IL-17 inhibitors, are intended to profoundly reshape the cytokine configuration of patients with inflammatory diseases such as psoriasis, with tremendous success in disease control. Yet, because of the important roles of cytokines in cancer promotion and control, concern was raised about the fact that the use of biologicals may alter immune surveillance and promote cancer progression. Both theoretical and practical data nevertheless showed that the treatment-induced control of cytokines may be beneficial for reducing the inflammatory milieu that promotes cancer and such have a beneficial role in maintaining health. We briefly present the intricate roles of those cytokine families on cancer control, with some debates on if their inhibition might or might not promote additional tumoral development.     

Synthesis of poly(urethane-urea) varnish bearing azobenzene chromophoric pendants

A new diol with azoaromatic pendant was prepared by N-phenyl-4-amido-3,4-dichloromaleimide with 2-mercaptoethanol in the presence of NaOH, and used to obtain photosensible poly(urethane-urea) varnish. A poly(urethane-urea) varnish bearing azobenzene chromophores, based on a poly(ethylene adipate)diol (average molecular weight—2000), 4,4′-dibenzyldiisocyanate, diethylene glycol, trimethylolpropane, and afore-mentioned diol, were prepared and characterized. The polymers were characterized by FTIR spectroscopy, thermal analysis (DMA, DSC, and TGA), and the photochromic behavior by UV irradiation of thin films was discussed.     

Structure and heat capacity of the NaCeF4 compound

This work continued our general research program on obtaining metallic cerium by electrodeposition from NaCeF4 dis-solved in different molten fluorides. The structure of NaCeF4 (cubic or hexagonal depe...