Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions

BACKGROUND: Heterogeneous photocatalysis is influenced by a number of parameters involving synergistic effects; hence, an experimental strategy design that considers interactions between the main variables is needed. The response surface methodology was applied for the investigation of photodegradation of 20 mg L^?1 Orange II in aqueous solutions and for optimization of color removal efficiency. Preliminary studies were performed to identify the parameters to be selected for optimization. RESULTS: The input variables considered for experimental design were: solution initial pH, oxidizing agent (H₂O₂) initial concentration and UV‐A irradiation time. The multivariate experimental design allowed the development of a quadratic response surface model to be used for the prediction of color removal efficiency over the full range of the experimental region. Under the optimum conditions established in the region of experimentation (pH = 6.9, [H₂O₂]₀ = 183 mg L^?1 and t = 32 min), a 100% color removal efficiency was obtained in experiments. CONCLUSIONS: It was found that the variables considered have important effects on color removal efficiency. The results demonstrate that the use of experimental design strategy is indispensable for successful investigation and adequate modeling of the process because the interdependence of the reaction parameters cannot be neglected. Copyright © 2008 Society of Chemical Industry     

Predictive control architecture for real-time image moments based servoing of robot manipulators

This paper presents a real-time architecture for visual servoing of robot manipulators using nonlinear based predictive control. In order to increase the robustness of the control algorithm, image moments were chosen to be the visual features which describe the objects from the image. A visual predictive architecture is designed to solve tasks addressed to robot manipulators with an eye-in-hand configuration. An implementation of the proposed architecture is done so that the capabilities of a 6 d.o.f robot manipulator are extended. The results of different experiments conducted with two types of image moments based controllers (proportional and predictive with reference trajectory) are presented and discussed.     

Silicon‐containing heterocyclic polymers and thin films made therefrom

Thin films, in the range of tens of micrometers thickness, have been prepared by casting onto glass plates the chloroform or N‐methylpyrrolidone solutions of polyimides or poly(imide‐amide)s containing silicon and phenylquinoxaline units in the main chain. The polymers have been synthesized by solution polycondensation reaction of aromatic diamines having preformed phenylquinoxaline rings with bis(3,4‐dicarboxyphenyl)dimethylsilane dianhydride or with a diacid chloride resulting from the reaction of this dianhydride with p‐aminobenzoic acid. The polymers were easily soluble in polar aprotic solvents and showed high thermal stability. The free‐standing films exhibited good mechanical properties with tensile strengths in the range of 48–86 MPa, tensile modulus in the range of 1.25–2.22 GPa and elongation at break in the range of 3–37%. Electrical insulating properties of some polymer films were evaluated on the basis of dielectric constant and dielectric loss and their variation with frequency and temperature. The values of the dielectric constant at 10 kHz were in the range of 2.94–3.08 for polyimides and 3.89–4.49 for poly(imide‐amide)s. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3062–3068, 2006     

High-Temperature Stiffness and Damping Measurements to Monitor the Glassy Intergranular Phase in Liquid-Phase-Sintered Silicon Carbides

Detailed stiffness and internal friction ( Q ⁻¹) versus temperature curves were obtained for liquid-phase-sintered silicon carbides using advanced resonant beam analysis up to 1400°C. As-sintered materials display a stable Q ⁻¹-peak near 1100°C, superimposed on an increasing background. The change of stiffness associated with the damping peak is quantitatively related to the amount of matter in pockets of the amorphous intergranular phase in which the refractory SiC matrix grains are embedded. The successful removal of the amorphous pockets by annealing at 1900°C is deduced from the disappearance of the damping peak and confirmed with transmission electron microscopy.     

New fluorinated poly(1,3,4-oxadiazole-ether-imide)s

New fluorinated poly(1,3,4-oxadiazole-ether-imide)s have been prepared by solution polycondensation reaction of different aromatic diamines having preformed 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2,5-bis[p-(3-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole and 2-(4-fluorophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole, with an aromatic dianhydride incorporating ether linkages and hexafluoroisopropylidene group, namely 1,1,1,3,3,3-hexafluoro-2,2-bis-[(3,4-dicarboxyphenoxy)phenyl]-propane dianhydride. The polymers were easily soluble in polar organic solvents, such as N-methylpyrrolidinone, N,N-dimethylformamide, and pyridine, as well as in certain low boiling-point organic solvents, such as tetrahydrofuran and chloroform. Very thin coatings deposited onto silicon wafers exhibited smooth, pinhole-free surface in atomic force microscopy. The polymers showed high thermal stability with decomposition temperature being above 410 °C. They exhibited a glass transition in the temperature range of 183-217 °C, with reasonable interval between glass transition and decomposition temperature. Solutions of some polymers in N,N-dimethylformamide exhibited blue fluorescence, having maximum emission wavelength in the range of 411-424 nm.     

Simple relations for thin-film-coated, phase-retarding totally reflecting prisms

An analysis is given of the designs of thin-film coatings on totally reflecting boundaries that produce half-wave, quarter-wave, and half-quarter-wave phase retardations. Particular single-layer, doublelayer, and symmetrical triple-layer coatings that contain only one non-quarter-wave layer are considered. Simple quadratic equations are presented for the non-quarter-wave-layer phase thickness. Useful diagrams of the solution zones for layer refractive indices are obtained.     

The estimation of corrosion behaviour of ZrTi binary alloys for dental applications using electrochemical techniques

Titanium and zirconium are in the same group in the periodic table of elements and are known to have similar physical and chemical properties. Both Ti and Zr usually have their surfaces covered by a thin oxide film spontaneously formed in air. However, the cytotoxicity of ZrO₂ is lower than that of TiO₂ rutile. Treatments with fluoride are known as the main methods to prevent plaque formation and dental caries. The corrosion behaviour of ZrTi alloys with Ti contents of 5, 25 and 45 wt.% and cp-Ti was investigated for dental applications. All samples were tested by linear potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) performed in artificial saliva with different pH levels (5.6 and 3.4) and different fluoride (1000 ppm F⁻) and albumin protein (0.6%) contents. In addition, scanning electron microscopy (SEM) was employed to observe the surface morphology of the test materials after linear potentiodynamic polarisation. The corrosion current densities for the ZrTi alloys increased with the titanium content. The Zr5Ti and Zr25Ti alloys were susceptible to localised corrosion. The role that Ti plays as an alloying element is that of increasing the resistance of ZrTi alloy to localised corrosion. The presence of 0.6% albumin protein in fluoridated acidified artificial saliva with 1000 ppm F⁻ could protect the cp-Ti and ZrTi alloys from attack by fluoride ions.     

Chalcogenide Thermoelectrics Empowered by an Unconventional Bonding Mechanism

Thermoelectric materials have attracted significant research interest in recent decades due to their promising application potential in interconverting heat and electricity. Unfortunately, the strong coupling between the material parameters that determine thermoelectric efficiency, i.e., the Seebeck coefficient, electrical conductivity, and thermal conductivity, complicates the optimization of thermoelectric energy converters. Main‐group chalcogenides provide a rich playground to alleviate the interdependence of these parameters. Interestingly, only a subgroup of octahedrally coordinated chalcogenides possesses good thermoelectric properties. This subgroup is also characterized by other outstanding characteristics suggestive of an exceptional bonding mechanism, which has been coined metavalent bonding. This conclusion is further supported by a map that separates different bonding mechanisms. In this map, all octahedrally coordinated chalcogenides with good performance as thermoelectrics are located in a well‐defined region, implying that the map can be utilized to identify novel thermoelectrics. To unravel the correlation between chemical bonding mechanism and good thermoelectric properties, the consequences of this unusual bonding mechanism on the band structure are analyzed. It is shown that features such as band degeneracy and band anisotropy are typical for this bonding mechanism, as is the low lattice thermal conductivity. This fundamental understanding, in turn, guides the rational materials design for improved thermoelectric performance by tailoring the chemical bonding mechanism.     

Phosphorus‐containing poly(ester‐imide)–polydimethylsiloxane copolymers

New phosphorus‐containing poly(ester‐imide)‐polydimethylsiloxane copolymers were prepared by solution polycondensation of 1,4‐[2‐(6‐oxido‐6H‐dibenz < c,e > < 1, 2 > oxaphosphorin‐6‐yl)]naphthalene‐bis(trimellitate) dianhydride with a mixture of an aromatic diamine (1,3‐bis(4‐aminophenoxy)benzene) and α,ω‐bis(3‐aminopropyl)oligodimethylsiloxane of controlled molecular weight, in various ratios. Poly(amic acid) intermediates were converted quantitatively to the corresponding polyimide structures using a solution imidization procedure. The polymers are easily soluble in polar organic solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylformamide, as well as in less polar solvents such as tetrahydrofuran. They show good thermal stability, the decomposition temperature being above 370 °C. The glass transition temperatures are in the range 165–216 °C. Solutions of the polymers in N‐methyl‐2‐pyrrolidone exhibit photoluminescence in the blue region. Copyright © 2010 Society of Chemical Industry