Sulfur containing polymers

Summary Copolymers containing -S-CO-S-and/or -O-CO-S-groups have been synthesized mainly by interfacial polycondensation.Different chemical structures were obtained by reacting 1,3-benzene dithiol (BDT) respectively with phosgene alone, phosgene and bisphenol-A (BPA), bischloroformate of BPA, BPA polycarbonate oligomers and by reacting phosgene with the products of BPA polycarbonate degraded with BDT. The chemical structures of the copolymers were investigated by IR, ¹H-NMR and ¹³C-NMR; molecular weights were determined by viscometry and vapor pressure osmometry. Although no attempt was made to find the optimum conditions for high molecular weight, some copolymers with fairly high mol. weight were obtained.     

Thermodynamic interactions of branched polyethylene in polar and nonpolar systems

The thermodynamic properties of polymer solutions are frequently described in terms of the Flory-Huggins equation. This equation includes a parameter χ, which depends upon the intermolecular forces acting between the molecules in a solution. The experimental determination of χ was performed by an improved microtechnique and extended to a wide range of polar and nonpolar diluents of polyethylene. Careful correlations are prescribed for calculating χ from pure-component properties; they are based on an extension of the Hildebrand-Scatchard theory of solutions and on the theory of intermolecular forces. Polar (τ) and nonpolar (δ) solubility parameters are presented for a variety of solvents. For polyethylene—nonpolar solvent systems we have emphasized the factor deciding the sign of heat of mixing, while for polyethylene-polar solvent systems we have determined the contribution of dipole-induced dipole interactions ψ (δτ) in interchange-energy density B and, hence, χ.     

The influence of hydrogen and nitrogen on the formation of Si nanoclusters embedded in sub-stoichiometric silicon oxide layers

This work reports the study concerning the influence of the preparation conditions on the structure of silicon rich oxide (SRO) deposited by PECVD method by which the structural properties of the film are strictly related. In particular we investigated the role of reactant gases N₂O and SiH₄ on the total Si concentration, Si excess concentration, Si clustered concentration and size of nanoclusters formed by high annealing temperature. We payed particular attention on the role of the hydrogen and nitrogen during the Si agglomeration.The presence of hydrogen atoms on the as-deposited specimen, confirmed by the Si–H bonds peak on the FTIR analysis, has been directly correlated to the silicon excess concentration in the layer. The silicon, oxygen and nitrogen atomic density has been calculated from RBS analysis. These information were coupled to the ones obtained using methodology based on electron energy loss spectroscopy combined with energy filtered images, which allowed us to quantify the clustered silicon concentration in annealed sub-stoichiometric silicon oxide layers (SiO_x). We have verified that the nitrogen dissolved in the layer inhibits the Si excess clustering so that the efficiency of silicon agglomeration process decreases as the nitrogen content increases.     

Effect of Myosin Isoforms on Cardiac Muscle Twitch of Mice,Rats and Humans

To understand how pathology-induced changes in contractile protein isoforms modulate cardiac muscle function, it is necessary to quantify the temporal-mechanical properties of contractions that occur under various conditions. Pathological responses are much easier to study in animal model systems than in humans, but extrapolation between species presents numerous challenges. Employing computational approaches can help elucidate relationships that are difficult to test experimentally by translating the observations from rats and mice, as model organisms, to the human heart. Here, we use the spatially explicit MUSICO platform to model twitch contractions from rodent and human trabeculae collected in a single laboratory. This approach allowed us to identify the variations in kinetic characteristics of α- and β-myosin isoforms across species and to quantify their effect on cardiac muscle contractile responses. The simulations showed how the twitch transient varied with the ratio of the two myosin isoforms. Particularly, the rate of tension rise was proportional to the fraction of α-myosin present, while the β-isoform dominated the rate of relaxation unless α-myosin was >50%. Moreover, both the myosin isoform and the Ca²⁺ transient contributed to the twitch tension transient, allowing two levels of regulation of twitch contraction.     

Probing the local structure of dilute Cu dopants in fluorescent ZnS nanocrystals using EXAFS

A local structure study of ZnS nanocrystals, doped with very low concentrations of Cu, was carried out using the EXAFS technique to better understand how Cu substitutes into the host lattice and forms Cu luminescence centers. We show that a large fraction of the Cu have three nearest neighbor S atoms and the Cu-S bond is significantly shortened compared to Zn-S, by ～0.08 ?. In addition, the second neighbor Cu-Cu peak is extremely small. We propose that Cu occupies an interior site next to a S(2-) vacancy, with the Cu displaced towards the remaining S(2-) and away from the vacancy; such a displacement immediately explains the lack of a significant Cu-Cu peak in the data. There is no evidence for interstitial Cu sites (Cu(i)), indicating that no more than 2% of the Cu are Cu(i.) This study provides new insights into the local structure of the Cu dopant in ZnS without the presence of CuS nanoprecipitates that are present at higher Cu doping levels.     

Nanoscale structural characterization of epitaxial graphene grown on off-axis 4H-SiC (0001)

In this work, we present a nanometer resolution structural characterization of epitaxial graphene (EG) layers grown on 4H-SiC (0001) 8° off-axis, by annealing in inert gas ambient (Ar) in a wide temperature range (T _gr from 1600 to 2000°C). For all the considered growth temperatures, few layers of graphene (FLG) conformally covering the 100 to 200-nm wide terraces of the SiC surface have been observed by high-resolution cross-sectional transmission electron microscopy (HR-XTEM). Tapping mode atomic force microscopy (t-AFM) showed the formation of wrinkles with approx. 1 to 2 nm height and 10 to 20 nm width in the FLG film, as a result of the release of the compressive strain, which builds up in FLG during the sample cooling due to the thermal expansion coefficients mismatch between graphene and SiC. While for EG grown on on-axis 4H-SiC an isotropic mesh-like network of wrinkles interconnected into nodes is commonly reported, in the present case of a vicinal SiC surface, wrinkles are preferentially oriented in the direction perpendicular to the step edges of the SiC terraces. For each T _gr, the number of graphene layers was determined on very small sample areas by HR-XTEM and, with high statistics and on several sample positions, by measuring the depth of selectively etched trenches in FLG by t-AFM. Both the density of wrinkles and the number of graphene layers are found to increase almost linearly as a function of the growth temperature in the considered temperature range.     

Imidazolium poly(butylene terephthalate) ionomers with long-term antimicrobial activity

Imidazolium poly(butylene terephthalate) ionomers with ionic groups located randomly along the polymer chain or selectively as end-groups (telechelic) have been prepared in order to determine their antimicrobial (AM) activity. Two different approaches have been followed for the linkage of the imidazolium to the polymer backbone: a covalent bond and an ionic aggregation to sulfonated groups covalently bonded to the polymer. The ionic groups have been linked to the polymer in order to improve the long-term AM activity since the low molecular weight additives commonly used tends to migrate toward the surface during use. We have found that imidazolium ionomers present AM activity comparable with that of commercial antimicrobial agents such as Triclosan. The AM activity depends on the polymer architecture, the telechelic approach being more active compared to the random approach. We have proved that imidazolium ionomers retain their high AM activity even after 6 days in water at 60 °C while Triclosan consistently loses his activity.     

Nucleation and Crystallization of a Lithium Aluminosilicate Glass

An aluminosilicate glass of composition 61SiO₂6Al₂O₃10MgO6ZnO·12Li₂O·5TiO₂ (mol%) has been prepared by a melting process and investigated as far as crystallization is concerned. Glass-ceramic is easily obtained because glass shows a high tendency to crystallize starting from 700°C. The crystalline phases evolve with temperature, showing the aluminosilicates to be the main phase up to 1050°C, followed by metasilicates and silicates, some of which have lower melting points. The titanates of Mg and Zn develop from the phase-separated glass, soon after T _g, and grow to form nucleation centers for the other crystalline phases. The evolution from phase-separated glass to glass-ceramic has been followed by many thermal, diffractometric, spectroscopic, and microscopic techniques.     

Mechanical analysis of structural adhesive for marine joints

A structural adhesive from I.C.R., X07 Extreme®, was fully characterised through tensile test, static and dynamic lap-shear strength test, cleavage peel test and DSC. Lap-shear tests were performed by using either aluminium, stainless steel and glass fibre reinforced polymer as substrate and after aging the specimen under extreme environmental conditions. The performance of this novel adhesive was compared to that of a structural adhesive of a competitor. The work summarises the typical procedures intended for the qualification of a structural adhesive for marine joints.     

Neoantigen-Specific T-Cell Immune Responses: The Paradigm of NPM1-Mutated Acute Myeloid Leukemia

The C-terminal aminoacidic sequence from NPM1-mutated protein, absent in normal human tissues, may serve as a leukemia-specific antigen and can be considered an ideal target for NPM1-mutated acute myeloid leukemia (AML) immunotherapy. Different in silico instruments and in vitro/ex vivo immunological platforms have identified the most immunogenic epitopes from NPM1-mutated protein. Spontaneous development of endogenous NPM1-mutated-specific cytotoxic T cells has been observed in patients, potentially contributing to remission maintenance and prolonged survival. Genetically engineered T cells, namely CAR-T or TCR-transduced T cells, directed against NPM1-mutated peptides bound to HLA could prospectively represent a promising therapeutic approach. Although either adoptive or vaccine-based immunotherapies are unlikely to be highly effective in patients with full-blown leukemia, these strategies, potentially in combination with immune-checkpoint inhibitors, could be promising in maintaining remission or preemptively eradicating persistent measurable residual disease, mainly in patients ineligible for allogeneic hematopoietic stem cell transplant (HSCT). Alternatively, neoantigen-specific donor lymphocyte infusion derived from healthy donors and targeting NPM1-mutated protein to selectively elicit graft-versus-leukemia effect may represent an attractive option in subjects experiencing post-HSCT relapse. Future studies are warranted to further investigate dynamics of NPM1-mutated-specific immunity and explore whether novel individualized immunotherapies may have potential clinical utility in NPM1-mutated AML patients.