Magnetic Nanoparticle Arrays Self-Assembled on Perpendicular Magnetic Recording Media

We study magnetic-field directed self-assembly of magnetic nanoparticles onto templates recorded on perpendicular magnetic recording media, and quantify feature width and height as a function of assembly time. Feature widths are determined from Scanning Electron Microscope (SEM) images, while heights are obtained with Atomic Force Microscopy (AFM). For short assembly times, widths were ~150 nm, while heights were ~14 nm, a single nanoparticle on average with a 10:1 aspect ratio. For long assembly times, widths approach 550 nm, while the average height grows to 3 nanoparticles, ~35 nm; a 16:1 aspect ratio. We perform magnetometry on these self-assembled structures and observe the slope of the magnetic moment vs. field curve increases with time. This increase suggests magnetic nanoparticle interactions evolve from nanoparticle–nanoparticle interactions to cluster–cluster interactions as opposed to feature–feature interactions. We suggest the aspect ratio increase occurs because the magnetic field gradients are strongest near the transitions between recorded regions in perpendicular media. If these gradients can be optimized for assembly, strong potential exists for using perpendicular recording templates to assemble complex heterogeneous materials.     

In-beam tests of proximity mesh dynode tubes for the STAR TOF subsystem

The performance of Bicron BC404, BC408 and BC420 scintillators coupled to a Hamamatsu R3432 proximity mesh dynode photomultiplier tube was studied using pion beams from the TRIUMF cyclotron and the Brookhaven National Laboratory AGS accelerator. A system resolution of better than 100 ps seems feasible. This will satisfy the requirement for charged particle identification in the STAR detector at RHIC.     

Characterization of the detergent insolubility of the T cell receptor for antigen

Aggregation of cell surface receptors plays an important role in signal transduction in many receptor systems. In the T cell receptor (TCR), as in many other cell surface receptors, this aggregation results in insolubility in certain nonionic detergents. We have characterized this insolubility for TCR, and we show it is not preexisting in HPB-ALL cells but increases with increasing TCR aggregation. It is not likely to be due to a direct interaction with cellular cytoskeletal elements, as it is not affected by inhibitors of actin or tubulin polymerization. It may be due to interaction with detergent-resistant membrane domains that have been found in various cell types and contain tyrosine kinases, the earliest known participants in TCR signal transduction. This aggregation-dependent insolubility occurs as rapidly as the anti-TCR antibody binds, so the kinetics are consistent with an involvement in signal transduction. It is not, however, dependent on signal transduction, as inhibitors of tyrosine kinases do not inhibit the insolubility. Insolubility is also enhanced by preaggregation of CD4, an important T cell surface molecule which also associates with the tyrosine kinase p56lck.     

Extensive genomic conservation of cattle microsatellite heterozygosity in sheep

We report the evaluation of 1036 bovine microsatellite primer pairs for their suitability as linkage markers in sheep. Approximately 58% (605/1036) of bovine primer pairs amplified a locus in sheep. Sixty-seven per cent (409/605) of amplified loci were detected as polymorphic. Marker heterozygosity, allele number and range of allele sizes were significantly lower in sheep than cattle sampled in this study. However, median fragment size was similar. These data suggest that high-resolution comparative linkage maps between closely related species can be constructed relatively efficiently.     

Organochlorine and Mercury Residues in Young-of-the-Year Spottail Shiners from the Detroit River,Lake St. Clair,and Lake Erie

Young-of-the-year spottail shiners (Notropis hudsonius) were used as biomonitors to determine the spatial distribution (1982/83) and assess trend data for organochlorine and mercury residues. Significantly (p < 0.01) higher PCB residues were found in Detroit River spottail shiners than in collections from southwestern Lake St. Clair and northwestern Lake Erie. The highest PCB residues were found in the west bank collections from Michigan waters (912–2,997ng/g) compared to the mid-stream (96–290 ng/g) and east bank collections (153–316 ng/g). Chlordane residues were found to be elevated in all spottail shiner samples from urbanized areas. Octachlorostyrene and ∑ DDT residues were distributed uniformly within the study area, whereas mercury concentrations were found to be lower in spottail shiners from northwestern Lake Erie than in comparable samples from the Detroit River and southwestern Lake St. Clair. Residues for BHC, heptachlor, aldrin, and chlorinated benzenes were near their detection limits; mirex and chlorinated phenols were not detectable. Recent (1982/83) PCB residue levels in spottail shiners exceeded the IJC aquatic life objective (Great Lakes Water Quality Agreement of 1978) at all the sites sampled, except at Pike Creek in Lake St. Clair. PCB residues in spottail shiners from Pike Creek, Big Creek, and Leamington have declined significantly (p < 0.01) since the mid-seventies. Mercury and chlordane residues have decreased in spottail shiner samples from Leamington, but have remained virtually unchanged at Big Creek and Pike Creek.     

Ex vivo expansion with stem cell factor and interleukin-11 augments both short-term recovery posttransplant and the ability to serially transplant marrow

The characterization of many cytokines involved in the control of hematopoiesis has led to intense investigation into their potential use in ex vivo culture to expand progenitor numbers. We have established the optimum ex vivo culture conditions that allow substantial amplification of transient engrafting murine stem cells and which, simultaneously, augment the ability to sustain serial bone marrow transplantation (BMT). Short-term incubation of unfractionated BM cells in liquid culture with stem cell factor (SCF) and interleukin-11 (IL-11) produced a 50-fold amplification of clonogenic multipotential progenitors (CFU-A). Following such ex vivo expansion, substantially fewer cells were required to rescue lethally irradiated mice. When transplanted in cell doses above threshold for engraftment, BM cells expanded ex vivo resulted in significantly more rapid hematopoietic recovery. In a serial transplantation model, unmanipulated BM was only able to consistently sustain secondary BMT recipients, but BM expanded ex vivo has sustained quaternary BMT recipients that remain alive and well more than 140 days after 4th degree BMT. These results show augmentation of both short-term recovery posttransplant and the ability to serially transplant marrow by preincubation in culture with SCF and IL-11.     

Nuclear fuel considerations for the 21 century

There are many external influences that may control the path that nuclear power deployment follows. In the next 50 years several events may unfold. Fear of the consequences of the greenhouse effect may produce a carbon tax that would make nuclear power economically superior very quickly. This, in turn, would increase the rate at which uranium reserves diminish due to the increased rate of nuclear power deployment. However, breakthroughs in the extraction of uranium from the sea or deployment of fast breeder reactors would greatly extend the uranium reserves and, as well, utilize the thorium cycle.On the other hand, carbon sequestering technology breakthroughs could keep fossil fuels dominant for the remainder of the century. Nuclear power may only then continue, as today, in a lesser role or even diminish. Fusion power or new developments in solar power could completely displace nuclear power as we know it today.Even more difficult to predict is when the demand for mobile fuel for transportation will develop such that hydrogen and hydrogen rich fuel cells will be in common use. When this happens, nuclear power may be the energy source of choice to produce this fuel from water or methane. In a similar vein, the demand for potable and irrigation water may be another driver for the advent of increased deployment of nuclear power.With all these possibilities of events that could happen it appears impossible to predict with any certainty which path nuclear power deployment may take. However, it is necessary to define a strategy that is flexible enough to insure that when a technology is needed, it is ready to be deployed.For the next few decades there will be an evolutionary improvement in the performance of uranium oxide and mixed uranium oxide-plutonium oxide (MOX) LWR fuels. These improvements will be market driven to keep the cost of fuel and the resulting cost of nuclear power electricity as competitive as possible. The development of fuels for accelerator transmutation and for reactor transmutation with inert matrix fuels is in its infancy. A great deal of research has been initiated in a number of countries, which has been summarized in recent conferences. In Europe the work on these fuels is directed at the same problem as their utilization of MOX; namely to reduce the inventory of separated plutonium, minor actinides, and Long Lived Fission Products (LLFP). In the United States there is no reprocessing and thus no inventory of separated civilian plutonium. However, in the United States there is a resistance to a permanent spent fuel repository and thus accelerator transmutation presents a possible alternative. If nuclear power does have a long-term future, then the introduction of the fast reactor is inevitable. Included in the mission of the fast reactors would be the elimination of the inventory of separated plutonium while generating useful energy. The work that is ongoing now on the development of fuel concepts for assemblies that contain actinides and LLFP would be useful for fast reactor transmutation.There is still a great deal of work required to bring the fast breeder reactor option to maturity. Fortunately there is perhaps a fifty-year period to accomplish this work before fast breeders are necessary. With regard to fast reactor fuel development, future work should be considered in three stages. First, all the information obtained over the past forty years of fast reactor fuel development should be completely documented in a manner that future generations can readily retrieve and utilize the information. Fast reactor development came to such an abrupt halt world-wide that a great deal of information is in danger of being lost because most of the researchers and facilities are rapidly disappearing. Secondly, for all of the existing fast reactor fuels, and this includes, oxides, carbides, nitrides, and metallic fuels, the evolutionary work was far from being completed. Although mixed oxide fuels were probably the furthest advanced, there were many concepts for improved claddings and advanced fabrication methods that were never fully explored. Finally, with such an extended period before fast reactors are needed there is ample time for truly innovative fuels to be developed that are capable of performing over a wide range of conditions and coolants.