Synthesis and characterization of hydroxyl terminated poly(butadiene)-g-poly(glycidyl azide) copolymer as a new energetic propellant binder

Summary Poly(glycidyl azide), PGA, was grafted onto Hydroxyl Terminated Poly(butadiene), HTPB, via free radical mechanism. PGA-macro azoinitator and HTPB polymer mixture was casted from solution and the polymer film was kept at 90°C for 4 hours. The grafted polymer was isolated from the product by fractional precipitation and characterized by NMR and FT-IR spectroscopy. Graft copolymer structure was also confirmed that volume ratio of nonsolvent to the solution of the graft copolymer was between those of corresponding homopolymers. TGA traces of the block polymers were containing two different maxima at 253°C (for PGA units) and 469°C (for HTPB units). Because of the incompatibility of the blocks, DSC curve showed two T_g's which belong to the related segments.     

A performance study of multiprocessor task scheduling algorithms

Multiprocessor task scheduling is an important and computationally difficult problem. A large number of algorithms were proposed which represent various tradeoffs between the quality of the solution and the computational complexity and scalability of the algorithm. Previous comparison studies have frequently operated with simplifying assumptions, such as independent tasks, artificially generated problems or the assumption of zero communication delay. In this paper, we propose a comparison study with realistic assumptions. Our target problems are two well known problems of linear algebra: LU decomposition and Gauss–Jordan elimination. Both algorithms are naturally parallelizable but have heavy data dependencies. The communication delay will be explicitly considered in the comparisons. In our study, we consider nine scheduling algorithms which are frequently used to the best of our knowledge: min–min, chaining, A^*, genetic algorithms, simulated annealing, tabu search, HLFET, ISH, and DSH with task duplication. Based on experimental results, we present a detailed analysis of the scalability, advantages and disadvantages of each algorithm.

Active time scheduling for rechargeable sensor networks

Recent progress in energy harvesting technologies made it possible to build sensor networks with rechargeable nodes which target an indefinitely long operation. In these networks, the goal of energy management is to allocate the available energy such that the important performance metrics, such as the number of detected threats, are maximized. As the harvested energy is not sufficient for continuous operation, the scheduling of the active and inactive time is one of the main components of energy management. The active time scheduling protocols need to maintain the energy equilibrium of the nodes, while considering the uncertainties of the energy income, which is strongly influenced by the weather, and the energy expenditures, which are dependent on the behavior of the targets. In this paper, we describe and experimentally compare three active time scheduling protocols: (a) static active time, (b) dynamic active time based on a multi-parameter heuristic and (c) utility-based uniform sensing. We show that protocols which take into consideration the probabilistic models of the energy income and expenditure and can dynamically adapt to changes in the environment, can provide a significant performance advantage.     

Electrochemical performance and modeling of lithium‐sulfur batteries with varying carbon to sulfur ratios

Lithium‐sulfur batteries have attracted much research interest because of their high theoretical energy density and low‐cost raw materials. While the electrodes are composed of readily available materials, the processes that occur within the cell are complex, and the electrochemical performance of these batteries is very sensitive to a number of cell processing parameters. Herein, a simple electrochemical model will be used to predict, with quantitative agreement, the electrochemical properties of lithium‐sulfur cathodes with varying carbon to sulfur ratios. The discharge capacity and the polarization were very similar for the lowest sulfur loadings, while above 23.2 wt% sulfur the gravimetric capacity dropped significantly, and there was an increase in the cell polarization. In addition, a transition in the electrode morphology, from well dispersed to aggregated sulfur at the surface, will be reflected in the change in a critical model parameter demonstrating the sensitivity and functionality of even this simple model in predicting complex behavior in the lithium‐sulfur cells.     

Changes in the texture,physicochemical properties and volatile compound profiles of fresh Kashar cheese (<90 days) during ripening

In this study, four different fresh Kashar cheese samples were ripened for 90 days. The physicochemical properties, texture attributes, fatty acid composition and volatile compound profiles of the samples were measured every 30 days of ripening. The texture properties of the cheese samples were significantly affected by the duration of the ripening period. The results of this study highlighted that texture parameters as a function of ripening period should be considered for both fresh and aged Kashar cheeses to determine the ripening period as they are very important for consumer acceptability and consumption of the end product.     

Free radical crosslinking of unsaturated bacterial polyesters obtained from soybean oily acids

Summary Poly(-3-hydroxy alkanoate) containing unsaturated side chains, PHA-soybean, were produced by feeding Pseudomonas oleovorans with soybean oily acids obtained from soybean oil. Unsaturation of PHA-soybean were found to be 10 mol-% of unsaturated side chains. Main saturated part of the biopolymer was Poly(3-hydroxy octanoate) with minor hexanoate and decanoate units. PHA films were crosslinked via free radical mechanism by means of thermally or under UV irradiation in the presence of benzoyl peroxide, benzophenon, and /or ethylene glycol dimethacrylate (EGDM). Crosslinking yield of the PHA films were found to be from 81 to 93 wt.-% from the sol-gel analysis. Swelling properties of the crosslinked PHA films in chloroform and toluene were also studied. Mc values of crosslinked PHAs were also calculated using Flory-Rehner equation. The crosslinked biopolyester obtained by thermally at 60 °C with benzoyl peroxide indicated the highest crosslinking density. Glass transition temperatures (Tg) of crosslinked biopolyester samples were changed from −33 to −45 °C while that of PHA-soybean was −60 °C. Received: 16 June 2000/Revised version: 22 January 2001/Accepted: 20 May 2001     

Comparison of additive effects on the PVA/starch cryogels: Synthesis,characterization, cytotoxicity,and genotoxicity studies

The research goal of this study is to produce suitable scaffolds for tissue engineering applications. Different ratios of polyvinyl alcohol (PVA)/starch (90:10, 70:30, 50:50) and crosslinking methods have been used to prepare cryogels. Chemically crosslinked cryogels were synthesized using glutaraldehyde as the crosslinking agent. For the physically crosslinked cryogels, sodium dodecyl sulfate was used during cryogelation as the foaming agent. Chemical structure and pore morphology were demonstrated by Fourier transform infrared spectroscopy and scanning electron microscopy (SEM). Swelling ratio and degradation profile of the scaffolds were also determined. 3-(4,5-dimethylthiazoyl-2-yl)-2,5-diphenyltetrazolium bromide assay and SEM were used to investigate the biocompatibility of the scaffolds and cell morphology. Genotoxicity test was performed to show DNA fragmentation. The overall results demonstrated that PVA/starch cryogels could have potentially appealing application as scaffolds for tissue engineering applications and additives affect the architecture and characteristic properties of the cryogels.     

Effective factors improving catalyst layers of PEM fuel cell

Cathode catalyst layer has an important role on water management across the membrane electrode assembly (MEA). Effect of Pt percentage in commercial catalyst and Pt loading from the viewpoint of activity and water management on performance was investigated. Physical and electrochemical characteristics of conventional and hydrophobic catalyst layers were compared. Performance results revealed that power density of conventional catalyst layers (CLs) increased from 0.28 to 0.64 W/cm² at 0.45 V with the increase in Pt amount in commercial catalyst from 20% to 70% Pt/C for H₂/Air feed. In the case of H₂/O₂ feed, power density of CLs increased from 0.64 to 1.29 W/cm² at 0.45 V for conventional catalyst layers prepared with Tanaka. Increasing Pt load from 0.4 to 1.2 mg/cm², improved kinetic activity at low current density region in both feeding conditions. Scattering electron microscopy (SEM) images revealed that thickness of the catalyst layers (CLs) increases by increasing Pt load. Electrochemical impedance spectroscopy (EIS) results revealed that thinner CLs have lower charge transfer resistance than thicker CLs. Inclusion of 30 wt % Polytetrafluoroethylene (PTFE) nanoparticles in catalyst ink enhanced cell performance for the electrodes manufactured with 20% Pt/C at higher current densities. However, in the case of 70% Pt/C, performance enhancement was not observed. Cyclic voltammetry (CV) results revealed that 20% Pt/C had higher (77 m²/g) electrochemical surface area (ESA) than 70% Pt/C (65 m²/g). In terms of hydrophobic powders, ESA of 30PTFE prepared with 70% Pt/C was higher than 30PTFE prepared with 20 %Pt/C. X-Ray Diffractometer (XRD) results showed that diameter of Pt particles of 20% Pt/C was 2.5 nm, whereas, it was 3.5 nm for 70% Pt/C, which confirms CV results. Nitrogen physisorption results revealed that primary pores of hydrophobic catalyst powder prepared with 70% Pt/C was almost filled (99%) with Nafion and PTFE.