Cell-Free Synthesis of Selenoproteins in High Yield and Purity for Selective Protein Tagging

The selenol group of selenocysteine is much more nucleophilic than the thiol group of cysteine. Selenocysteine residues in proteins thus offer reactive points for rapid post-translational modification. Herein, we show that selenoproteins can be expressed in high yield and purity by cell-free protein synthesis by global substitution of cysteine by selenocysteine. Complete alkylation of solvent-exposed selenocysteine residues was achieved in 10 minutes with 4-chloromethylene dipicolinic acid (4Cl-MDPA) under conditions that left cysteine residues unchanged even after overnight incubation. Gd^III−Gd^III distances measured by double electron–electron resonance (DEER) experiments of maltose binding protein (MBP) containing two selenocysteine residues tagged with 4Cl-MDPA-Gd^III were indistinguishable from Gd^III−Gd^III distances measured of MBP containing cysteine reacted with 4Br-MDPA tags.     

Characterization of modified PbTiO3 ceramic particles by statistical treatment of their size distribution

Microstructural characteristics of (Pb, Ca)TiO₃ piezoelectric ceramic particles have been deduced from computer analysis of their images and the corresponding statistical treatment of the data obtained. It is intended that this study should be used as a nexus, or link, between the geometrical parameters of these particles and some of their physical properties.     

Effects of preparation conditions on the surface modification and performance of polyethersulfone ultrafiltration membranes

The impact that some membrane preparation steps had on ultrafiltration (UF) membrane characteristics and performance was studied. Polyethersulfone (PES) was employed as base polymer, while N‐methyl pyrrolidone (NMP) was used as a solvent, and polyvinylpyrrolidone (PVP) was used as a nonsolvent pore‐forming additive. The manufacturing variables studied were solvent evaporation time and membrane surface modification, using a fluorine‐based copolymer referred to as surface‐modifying macromolecule (SMM). The flat sheet membranes, prepared via phase inversion, were characterized using solute transport data, X‐ray photoelectron spectroscopy (XPS), and contact angle measurements. Membrane performance was evaluated via filtration test protocol that included a 6‐day filtration of concentrated river water. The flux reduction with time was modeled using single and dual mechanisms of fouling. The pore blockage/cake filtration model described better the behavior of the permeation rate along the experiments. Increasing the solvent evaporation time decreased the size of the pores and the permeation rate. However, it did not significantly affect the removal of the organic compounds naturally present in the river water used as feed. XPS and contact angle measurements proved that the short evaporation periods did not allow enough SMM migration to the surface to provoke a significant effect on the membrane performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Envelopes with microplastics generated from recycled plastic bags for crude oil sorption

Oil spill accidents in marine environments and the lack of disposal of post-consumer plastic are environmental problems worldwide. This study presents a sustainable alternative for both issues through envelopes filled with microplastics (MPs) from recycled bags for the sorption of spilled crude oil. Through particle size analysis by three different sieves (4, 9, and 20 mesh), different MP sizes were characterized by scanning electron microscope (SEM), Brunauer–Emmett–Teller (BET), density, contact angle (CA), and Fourier-transform infrared spectroscopy (FTIR). According to their sizes, the MPs were distributed in envelopes and submitted to crude oil sorption capacity and efficiency evaluation. Three MP particle sizes were obtained (from the largest to the smallest, according to the sieve mesh, MP4, MP9, and MP20). SEM images of samples exhibited irregular and porous surfaces, and MP4 had the smallest pore size (8.6 μm). BET showed that MP4 had the highest surface area (0.074 m²/g). The CA > 90° exposed that all samples were hydrophobic. FTIR spectrum demonstrated that the samples from the recycled bags were made of high density polyethylene (HDPE). The MP4 envelopes also had the best crude oil sorption results in capacity and efficiency (1.73 g/g and 68%, respectively), being a promising recycled sorbent in crude oil spillage applications.     

Impact of Membrane Surface Modification on the Treatment of Surface Water

New polyethersulfone (PES) based membranes for ultrafiltration (UF) were developed by blending a surface-modifying macromolecule (SMM) in the casting solution, in an attempt to minimize the impact of fouling. Fouling was evaluated using concentrated Ottawa River water (CORW), either unfractionated or fractionated via UF. These membranes also included some polyvinylpyrrolidone (PVP), a pore forming additive. A statistical analysis was conducted to evaluate the impact of some variables on the treatment of the surface water. The independent variables included PVP/PES ratio in the casting solution, with and without SMM, and the nature of the feed CORW [low molecular weight (LMW) fraction, unfractionated, high molecular weight (HMW) fraction]. The performance variables studied were total organic carbon (TOC) removal, the foulant accumulation at the membrane surface after filtration, the flux reduction, and the final permeate flux. The most important variable was the feed water. Filtration of LMW had a higher final flux, less fouling, but slightly lower TOC removal. The SMM did not significantly impact the membrane performance. TOC removal was high, compared with results reported in the literature for UF membranes.     

Lipolysis,lipid peroxidation and texture of Serrano ham processed under different ripening temperature conditions

Lipolysis, lipid peroxidation, texture and rancid taste were investigated in Serrano hams processed under low, medium and high ripening temperature conditions (RTC) for 15 months. Medium RTC hams showed the highest contents of saturated and monounsaturated free fatty acids (FFAs) from month 5 to 15 and of polyunsaturated FFAs from month 7 to 12. The primary peroxidation index decreased during ripening in all hams, with higher levels for low RTC hams from month 5 onwards. Contrarily, the secondary peroxidation index increased during ripening in all hams, with higher levels for medium RTC hams from month 7 onwards. Texture parameters varied significantly among ham muscles. Shear force increased during ripening in all hams, with higher values for medium RTC hams, whereas cutting force was not influenced by RTC or ripening time. Rancid taste scarcely developed during ripening and was not affected by RTC.     

Macrophage-Mediated Melanoma Reduction after HP-NAP Treatment in a Zebrafish Xenograft Model

The Helicobacter pylori Neutrophil Activating Protein (HP-NAP) is endowed with immunomodulatory properties that make it a potential candidate for anticancer therapeutic applications. By activating cytotoxic Th1 responses, HP-NAP inhibits the growth of bladder cancer and enhances the anti-tumor activity of oncolytic viruses in the treatment of metastatic breast cancer and neuroendocrine tumors. The possibility that HP-NAP exerts its anti-tumor effect also by modulating the activity of innate immune cells has not yet been explored. Taking advantage of the zebrafish model, we examined the therapeutic efficacy of HP-NAP against metastatic human melanoma, limiting the observational window to 9 days post-fertilization, well before the maturation of the adaptive immunity. Human melanoma cells were xenotransplanted into zebrafish embryos and tracked in the presence or absence of HP-NAP. The behavior and phenotype of macrophages and the impact of their drug-induced depletion were analyzed exploiting macrophage-expressed transgenes. HP-NAP administration efficiently inhibited tumor growth and metastasis and this was accompanied by strong recruitment of macrophages with a pro-inflammatory profile at the tumor site. The depletion of macrophages almost completely abrogated the ability of HP-NAP to counteract tumor growth. Our findings highlight the pivotal role of activated macrophages in counteracting melanoma growth and support the notion that HP-NAP might become a new biological therapeutic agent for the treatment of metastatic melanomas.     

Flexible Piezoelectric Touch Sensor by Alignment of Lead‐Free Alkaline Niobate Microcubes in PDMS

A highly sensitive, lead‐free, and flexible piezoelectric touch sensor is reported based on composite films of alkaline niobate K_0.485Na_0.485Li_0.03NbO₃ (KNLN) powders aligned in a polydimethylsiloxane (PDMS) matrix. KNLN powder is fabricated by solid‐state sintering and consists of microcubes. The particles are dispersed in uncured PDMS and oriented by application of an oscillating dielectrophoretic alignment field. The dielectric constant of the composite film is almost independent of the microstructure, while upon alignment the piezoelectric charge coefficient increases more than tenfold up to 17 pC N^?1. A quantitative analysis shows that the origin is a reduction of the interparticle distance to under 1.0 µm in the aligned bicontinuous KNLN chains. The temperature stable piezoelectric voltage coefficient exhibits a maximum value of 220 mV m N^?1, at a volume fraction of only 10%. This state‐of‐the‐art value outperforms bulk piezoelectric ceramics and composites with randomly dispersed particles, and is comparable to the values reported for the piezoelectric polymers polyvinylidenefluoride and its random copolymer with trifluoroethylene. Optimized composite films are incorporated in flexible piezoelectric touch sensors. The high sensitivity is analyzed and discussed. As the fabrication technology is straightforward and easy to implement, applications are foreseen in flexible electronics such as wireless sensor networks and biodiagnostics.     

Sugarcane bagasse cellulose/HDPE composites obtained by extrusion

Natural fibers used in this study were both pre-treated and modified residues from sugarcane bagasse. Polymer of high density polyethylene (HDPE) was employed as matrix in to composites, which were produced by mixing high density polyethylene with cellulose (10%) and Cell/ZrO₂·nH₂O (10%), using an extruder and hydraulic press. Tensile tests showed that the Cell/ZrO₂·nH₂O (10%)/HDPE composites present better tensile strength than cellulose (10%)/HDPE composites. Cellulose agglomerations were responsible for poor adhesion between fiber and matrix in cellulose (10%)/HDPE composites. HDPE/natural fibers composites showed also lower tensile strength in comparison to the polymer. The increase in Young’s modulus is associated to fibers reinforcement. SEM analysis showed that the cellulose fibers insertion in the matrix caused an increase of defects, which were reduced when modified cellulose fibers were used.