Surface Reconstruction Engineering with Synergistic Effect of Mixed-Salt Passivation Treatment toward Efficient and Stable Perovskite Solar Cells

Surface passivation treatment is a widely used strategy to resolve trap-mediated nonradiative recombination toward high-efficiency metal-halide perovskite photovoltaics. However, a lack of passivation with mixture treatment has been investigated, as well as an in-depth understanding of its passivation mechanism. Here, a systematic study on a mixed-salt passivation strategy of formamidinium bromide (FABr) coupled with different F-substituted alkyl lengths of ammonium iodide is demonstrated. It is obtained better device performance with decreasing chain length of the F-substituted alkyl ammonium iodide in the presence of FABr. Moreover, they unraveled a synergistic passivation mechanism of the mixed-salt treatment through surface reconstruction engineering, where FABr dominates the reformation of the perovskite surface via reacting with the excess PbI₂. Meanwhile, ammonium iodide passivates the perovskite grain boundaries both on the surface and top perovskite bulk through penetration. This synergistic passivation engineer results in a high-quality perovskite surface with fewer defects and suppressed ion migration, leading to a champion efficiency of 23.5% with mixed-salt treatment. In addition, the introduction of the moisture resisted F-substituted groups presents a more hydrophobic perovskite surface, thus enabling the decorated devices with excellent long-term stability under a high humid atmosphere as well as operational conditions.     

Alteration of the Route to Menaquinone towards Isochorismate-Derived Metabolites

Chorismate and isochorismate constitute branch-point intermediates in the biosynthesis of many aromatic metabolites in microorganisms and plants. To obtain unnatural compounds, we modified the route to menaquinone in Escherichia coli. We propose a model for the binding of isochorismate to the active site of MenD ((1R,2S, 5S,6S)-2-succinyl-5-enolpyruvyl-6-hydroxycyclohex-3-ene-1-carboxylate (SEPHCHC) synthase) that explains the outcome of the native reaction with α-ketoglutarate. We have rationally designed variants of MenD for the conversion of several isochorismate analogues. The double-variant Asn117Arg–Leu478Thr preferentially converts (5S,6S)-5,6-dihydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHD), the hydrolysis product of isochorismate, with a >70-fold higher ratio than that for the wild type. The single-variant Arg107Ile uses (5S,6S)-6-amino-5-hydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHA) as substrate with >6-fold conversion compared to wild-type MenD. The novel compounds have been made accessible in vivo (up to 5.3 g L⁻¹). Unexpectedly, as the identified residues such as Arg107 are highly conserved (>94 %), some of the designed variations can be found in wild-type SEPHCHC synthases from other bacteria (Arg107Lys, 0.3 %). This raises the question for the possible natural occurrence of as yet unexplored branches of the shikimate pathway.     

Production of proteinase A by Saccharomyces cerevisiae in a cell-recycling fermentation system: experiments and computer simulations

Overproduction of proteinase A by recombinant Saccharomyces cerevisiae was investigated by cultivations in a cell-recycling bioreactor. Membrane filtration was used to separate cells from the broth. Recycling ratios and dilution rates were varied and the effect on enzyme production was studied both experimentally and by computer simulations. Experiments and simulations showed that cell mass and product concentration were enhanced by high ratios of recycling. Additional simulations showed that the proteinase A concentration decreased drastically at high dilution rates and the optimal volumetric productivities were at high dilution rates just below washout and at high ratios of recycling. Cell-recycling fermentation gave much higher volumetric productivities and stable product concentrations in contrast to simple continuous fermentation.     

Pharmacokinetic and bioequivalence study of two gemfibrozil preparations

A comparative pharmacokinetic study has been performed in 19 healthy male volunteers in a single-dose, randomized, two way cross-over design with two preparations of gemfibrozil (CAS 25812-30-0) capsules each of them containing 300 mg active ingredient. The test preparation was Innogem 300 mg capsule. The plasma concentration of gemfibrozil was determined by a validated HPLC-UV analytical method. The statistical comparison of individual pharmacokinetic parameters (AUC0-16, AUC0-oc Cmax, tmax) of the two capsule preparations was performed by three-way analysis of variance (ANOVA), Wilcoxon's, Westlake's, Schuirmann's and Hanck-Anderson's method as well as by the calculation of confidence intervals on the ratio of test/reference. The relative bioavailability of the test preparation with respect to the reference preparation in terms of the AUC0-oc was 104.06 +/- 21.61%. No statistically significant difference was found between the pharmacokinetic parameters, calculated from plasma concentration-time curves, indicating that the two preparations were bioequivalent.     

Evaluation of the completion of influenza vaccination

OBJECTIVE: To find the reasons which determine failures to comply with anti-flu vaccinations, so that these can be corrected and the coverage of this preventive action be increased. DESIGN: Observational crossover study, done by means of a telephone survey of people over 65. A questionnaire with closed questions, composed after a pilot study and validated by Cronbach's alpha. SETTING: Primary Care Centre (PCC). PATIENTS: We calculated a population sample for qualitative variables (_ = 0.05; p = 0.60; e = 0.05) of 294 people over 65, chosen from the PCC records, by means of random sampling (K = 4) stratified for age and discounting the telephone selection bias. MEASUREMENTS AND RESULTS: The proportion of vaccinated patients (60.9%) obtained in our study did not significantly differ from that in the general population. The percentage of patients included in the programme for the first time was 14%. Level of satisfaction among those vaccinated was 89.4%, with 8.9% of problems detected being light. Main causes of non-vaccination were: thinking that they didn't need it (63.5%), ignorance of the campaign (35.7%), fear of the reaction (24.3%), forgetting (10.4%). The main form of access to the campaign information was from the PCC, both through individuals and posters. Lack of information was statistically significant (p < 0.00001) as a determinant of non-vaccination, without other factors (age, sex, associated pathologies...) explaining these differences. CONCLUSIONS: Individualised and on-going health education by the PCC is fundamental. This would enable the identification of the group not vaccinated due to their express refusal and the recovery of non-vaccinated patients.     

Optical and structural properties of MOVPE grown GaxIn1−xAs/InP strained multiple quantum well atructures

This paper presents a study of the structural and optical properties of strained GaInAs/ InP multiple quantum well (MQW) structures fabricated by LP-MOVPE. The composition of the Ga _x In_1−x As films ranged fromx = 0.17 tox = 1.0 and was determined by sputtered neutral mass spectrometry (SNMS) on thick layers. The structures of the MQW samples with well widths from 1.5 to 5 nm were investigated by high resolution x-ray diffraction (HR-XRD). Simulations of the diffraction patterns showed that transition layers of approximately 2 monolayer (ML) thickness with high lattice mismatch exist at the interfaces. Photoluminescence (PL) measurements indicate well widths of a multiple of a monolayer with local variations of one monolayer. The PL peak energies vary smoothly with the Ga concentration. These results were confirmed by optical absorption measurements.     

Microwave cavity perturbation technique: Part I: Principles

This report reviews the analysis used to extract the complex conductivity of a compound from a microwave cavity perturbation measurement. We intend to present a generalized treatment valid for any spheroidally shaped sample of arbitrary conductivity which is placed at either the electric or magnetic field antinode of the cavity. To begin with, we establish the relationship between the measured parameters and the conductivity for a spherical sample. Next, we extend these results to the case of spheroids; and for the first time, we cover all different configurations that one can possibly use to study an arbitrary conducting sample inside a cavity: in particular, all possible orientations of the sample with respect to the applied field are solved.     

Formation of droplets on Si surfaces bombarded by In from a capillary type liquid metal ion source

Droplet formation on Si surfaces bombarded by 10 keV beams from a liquid metal indium ion source has been observed. It has been verified that excess indium is transported in the ion beam, probably in the form of charged droplets. SIMS, SEM and RBS techniques have been used to study the distribution of droplets at the surface. At the specified ion source operating conditions, equilibrium droplet coverage is of the order of 25%. Individual droplets have an average diameter of 0.35 ωm and an average height of 2.2 nm. At a bombardment current density of 0.1 mA cm^?2, equilibrium coverage is reached in about 1 s.     

Multifunctional hydrogels that promote osteogenic hMSC differentiation through stimulation and sequestering of BMP2

The extracellular environment controls many cellular activities thereby linking external material cues to internal cell function. By better understanding these processes, synthetic extracellular material niches can be tailored to present cells with highly regulated physical and/or chemical cues that promote or suppress selected cell functions. Here, poly(ethylene glycol) (PEG) hydrogels were functionalized with fluvastatin-releasing grafts and growth factor binding heparin domains to enable the dynamic exchange of information between the material and cells from the outside-in and inside-out (i.e., bidirectional signaling). By incorporating a fluvastatin-releasing graft and carefully controlling the dose and temporal release, materials were designed to promote bone morphogenic protein (BMP2) and alkaline phosphatase (ALP) production by human mesenchymal stem cells (hMSCs). When the release of fluvastatin was controlled to occur over 2 weeks, BMP2 and ALP production was increased 2.2-fold and 1.7-fold, respectively, at day 28 compared to hMSCs cultured in the absence of fluvastatin. By introducing a heparin functionality into the gel to sequester and localize the hMSC-produced BMP2, the osteogenic differentiation of hMSCs was further augmented over fluvastatin delivery alone. Osteopontin and core binding factor α1 gene expression was 6-fold and 4-fold greater for hMSCs exposed to fluvastatin in the presence of the heparin functionalities, respectively. These results demonstrate how multifunctional gels that interact with cells in a bidirectional manner can efficiently promote selected cell functions, such as the osteogenic differentiation of hMSCs.