Solar light-driven reduction of crystal violet by a composite of g-C3N4, β-Ag2Se, γ-Fe2O3 and graphite

Abstract

In this work, a new g-C₃N₄-based Z-scheme with γ-Fe₂O₃ and β-Ag₂Se both n-type semiconductors, and graphite to favor electron exchange is presented. The composite material was studied by XRD, FTIR, UV-Vis, TEM, XPS, TGA, DSC and TOF-SIMS, and the ability of this photocatalytic system to act as a photo-reductant was assessed using crystal violet (CV⁺) dye. Solar light driven photo-reduction of CV⁺ in the presence of tri-sodium citrate evidenced a synergistic enhancement of the activity of the composite toward reduction, with ～20 times higher conversion rates per unit of surface area than those of g-C₃N₄. Photo-oxidation experiments under Xe lamp irradiation in the presence of H₂O₂ also showed that the AgFeCN composite featured a higher activity (～8×) than g-C₃N₄. This Z-scheme may deserve further study as a photo-reductant to obtain hydrogen or hydrogenated compounds. Moreover, the use of CV⁺ may represent a facile procedure that can aid in the selection of new photocatalysts to be used in hydrogen production.     

Logarithmic wavelength demultiplexers

A general approach for a full 1 /spl times/ N demultiplexer using a tree of filter stages is proposed. The device architecture is compact, requiring at least N - 1 filter stages, and flexible, as each filter stage can be arbitrarily designed, with the only constraint of the half-band power property. The filters can be realized using any optical filtering techniques as thin-film interference, Bragg gratings, or planar delay-line circuits. The performances of the proposed architecture are illustrated with respect to different lattice-form finite impulse response (FIR) and infinite impulse response (IIR) filter stages, showing that the demultiplexer inherently presents low crosstalk and flat passband. A design example of a 1 /spl times/ 4 demultiplexer consisting of three all-pass (AP) filters is compared with a generalized Mach-Zehnder interferometer (MZI) with four AP filters in its arms, showing that the two approaches achieve similar results.     

Crosslinking reactions and swelling behavior of matrices based on N-acryloyl-TRIS(hydroxymethyl)aminomethane

Summary In this study, new hydrogels in rod shape were prepared from N-acryloyl-TRIS(hydroxymethyl)aminomethane (NAT) using ethylene glycol dimethacrylate (EGDMA) or N,N’methylenebisacrylamide (BIS) as crosslinking agent, dimethylformamide (DMF) as solvent and benzoyl peroxide (BPO) as initiator. In most cases, 2-hydroxyethyl methacrylate (HEMA), acrylamide (Aam) or acrylic acid (Aac) were used as co-monomers. The polymeric matrices obtained by free radical polymerization exhibited different properties by changing crosslinker, crosslinker concentration, co-monomer and initial NAT/co-monomer mole ratio. Besides, hydrogels from HEMA, Aam and Aac with BIS in absence of NAT were prepared under the same experimental reaction conditions in order to compare the properties of these products with those synthesized from NAT and the respective co-monomers. Some of the final products were selected to perform urea release assays, conducted through swelling-controlled release. Urea was chosen as “model” plant fertilizer agent.     

QoS assessment of 3G video-phone calls by tracing watermarking exploiting the new colour space `YST?

Tracing watermarking has been recently proposed as a technique to provide a blind measure of the quality of service of the communication link, focusing on multimedia communication scenarios. 3G communication scenarios, where each customer transmits both voice and MPEG-4 video sequences in real time, have been considered. Typical video-phone call consists of close shots of speakers, framing their face in the foreground. For such particular application, a novel colour space (YST) is adopted to minimise the perceptual distortions on face coding introduced by watermarking. In the YST space, the luminance component (Y) is the same as in conventional YUV space, whereas the vectors S and T lie within the chrominance (UV) plane. The S (skin) component is a linear combination of U and V obtained as the 'average' chrominance estimated from an assorted set human faces to achieve a reasonable generalisation. The third component, T, is defined as orthogonal to the YS plane. The results show the benefits obtained in digital watermarking by the new representation against the conventional approach. In fact, the sensitivity of the YST representation outperforms the conventional one in terms of objective (mean square error, peak signal-to-noise ratio) and subjective (video-quality metrics) indicators.     

Hidden Markov modeling using a dominant state sequence with application to speech recognition

Approximate maximum likelihood (ML) hidden Markov modeling using the most likely state sequence (MLSS) is examined and compared with the exact ML approach that considers all possible state sequences. It is shown that for any hidden Markov model (HMM), the difference between the approximate and the exact normalized likelihood functions cannot exceed the logarithm of the number of states divided by the dimension of the output vectors (frame length), which is negligible for typically used values of vector dimension (128–256) and number of states (2–30). Furthermore, for Gaussian HMMs and a given observation sequence, the MLSS is typically the sequence of nearest neighbor states in the Itakura-Saito sense, and the posterior probability of any state sequence which departs from the MLSS in a single time instant decays exponentially with the frame length. Hence, for a sufficiently large frame length the exact and approximate ML approaches provide similar model estimates and likelihood values. The results and their implications on speech recognition are demonstrated in a set of experiments.     

A new FMS architecture based upon networked DSP servo technology

This paper presents a critical evaluation of existing FMS architectures and the academic and industrial design and development strategies used during their formulation. The paper seeks to address the need for, and value of, existing architectures within the industrial arena. More importantly however, this paper puts forward a new two-tier distributed control architecture for FMS based upon new (real-time) networkable DSP servo control methodologies developed by one of the authors for Softronics in Australia. The ramifications of these methodologies are substantial, not only in terms of FMS control, but in the overall simplification of such systems and the development of flexible fixturing devices over the coming decade. This paper also postulates on how new FMS architectures can be developed from such technologies and details why such architectures could be more appropriate to industry needs than those that are currently in existence.     

Fast Inverse Motion Compensation Algorithms for MPEG and for Partial DCT Information

In prior work, we developed a fast inverse motion compensation method that can be implemented directly on the DCT domain representation derived from the compressed bitstreams conforming to MPEG, H.261, and H.263 standards. That work was restricted to compressed-domain representations wherein the motion-vectors have integer pel accuracy. Here, we extend this work to fractional-pel accurate motion-vectors. We also extend the prior work to speed up the inverse motion compensation process in the DCT domain by explicitly exploiting the sparseness of the DCT domain representation. Using partial DCT information, we show that the DCT domain method has substantially lower operation count than the conventional spatial domain approach which requires decompression followed by inverse motion-compensation.     

Synthesis and Evaluation of Blends Formed by Polymeric Crown Ethers and a Fullerene-Containing Primary Ammonium Salt in Organic Thin Films

The synthesis of a series of polymers and cyclopolymers bearing crown ethers of differing structure and affinities towards primary ammonium ions is discussed. These polymers have been tested in their efficiency to form structurally homogeneous thin films when blended with an amphiphilic C₆₀ compound containing a primary ammonium ion functional group. The X-ray reflectivity characterization of the films revealed that the polymer bearing the crown ether with the least affinity for primary ammonium ions, but having the highest degree of polymerization, is the most effective in forming structurally homogeneous thin films.