Violence detection in videos using interest frame extraction and 3D convolutional neural network

Multimedia Tools and Applications - With the rapid development of detecting violent behaviors in surveillance cameras, requests on systems that automatically recognize violent events are expanded....     

Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Improvement of physical and mechanical properties of electrospun poly(lactic acid) nanofibrous structures

Iranian Polymer Journal - The electrospinning of stereocomplexed poly(lactic acid) (Sc-PLA) twisted yarns was our approach to produce PLA-based nanofibrous structures with improved physical and...     

Wireless Information and Power Transfer in Single User OFDM Systems

Wireless Personal Communications - In this article, OFDM-based single-user simultaneous wireless information and power transfer (SWIPT) system for power splitting (PS) and time switching (TS) plans...     

CFD Simulation of Deep-Bed Paddy Drying Process and Performance

Computational Fluid Dynamics (CFD) was applied three-dimensionally to simulate the drying behavior of paddy in a deep-bed dryer. The commercial CFD software Fluent 6.3.26 was used. The deep-bed paddy drying process and performance were studied by incorporating user-defined function (UDF) in Fluent written in C language. The predicted drying parameters were compared with experimental data of deep-bed drying of paddy. The values of mean relative deviation (MRD), standard error of prediction (SEP), and maximum error of prediction (MEP) for prediction of grain moisture content, air temperature, and absolute humidity were less than 6, 10, and 9%; 0.33% (d.b), 1.24°C, and 0.06% (kg/kg of dry air); and 2.25% (d.b), 6.8°C, and 0.37% (kg/kg of dry air), respectively, which reflect reasonable accuracy. Moreover, the energetic and exergetic performance of deep-bed paddy drying were simulated and analyzed. The effects of inlet air temperature and mass flow rate on the performance parameters were investigated. It was shown that the application of higher levels of inlet air temperature and lower mass flow rates yielded higher exergy efficiencies of deep-bed paddy drying.     

Magnetic field responsive methylcellulose-polycaprolactone nanocomposite gels for targeted and controlled release of 5-fluorouracil

5-Fluorouracil loaded magnetic field sensitive methylcellulose and polycaprolactone gels were prepared and characterized by FTIR, XRD, TGA, SEM, and VSM. Swelling analysis supplied important information on drug diffusion properties. The release profile of gels was investigated in different buffer solutions and the highest release values were observed at pH = 7.2. Release kinetic was analyzed using an empirical equation to clarify the transport properties of drug. The effects of nanoparticle concentration and applying external magnetic field were investigated on release profile. The results indicated that the drug release decreased by both, applying external magnetic field and increasing the concentration of Fe₃O₄ nanoparticles.     

Effect of nano-sized calcium carbonate on cure kinetics and properties of polyester/epoxy blend powder coatings

Today's strict environmental laws pose significant challenges for coating's formulators to look for eco-friendly products. Powder coatings, particularly polyester/epoxy blends have demonstrated their ability as alternatives to traditional solvent-borne coatings. Recently, the use of nanoparticles such as nano-CaCO₃ (nCaCO₃) has been suggested as a beneficial strategy towards powder coating application with improved properties. Here, we study the effect of nCaCO₃ on morphology, cure behavior, adhesion and hardness of polyester/epoxy systems. The nanoparticles shape, size and dispersion state were investigated through X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. Furthermore, isothermal cure characterization of the neat and filled systems was performed using a torque rheometer. The most important finding based on the rheological studies was the catalytic effect of nCaCO₃ on cure reaction of polyester/epoxy, leading to the shorter curing time. Moreover, the kinetic analyses of rheograms revealed a marked decrease in the activation energy of the cure process upon raising nCaCO₃ content. Interestingly, pull-off adhesion and hardness tests showed that the hardness and adhesion strength were dramatically increased by the addition of nCaCO₃ into the polyester/epoxy system compared to pure blend resin. Therefore, considering the strong competition in powder coating market, the use of nCaCO₃ as a commercial and inexpensive nanofiller is necessary not only to reduce the dwell time which has benefits in terms of the energy consumption and economics, but also to improve the performance of final polyester/epoxy coating.     

Formulation of dynamics,actuation, and inversion of a three‐dimensional two‐link rigid body system

In this paper, three issues related to three‐dimensional multilink rigid body systems are considered: dynamics, actuation, and inversion. Based on the Newton‐Euler equations, a state space formulation of the dynamics is discussed that renders itself to inclusion of actuators, and allows systematic ways of stabilization and construction of inverse systems. The development here is relevant to robotic systems, biological modeling, humanoid studies, and collaborating man‐machine systems. The recursive dynamic formulation involves a method for sequential measurement and estimation of joint forces and couples for an open chain system. The sequence can start from top downwards or from the ground upwards. Three‐dimensional actuators that produce couples at the joints are included in the dynamics. Inverse methods that allow estimation of these couples from the kinematic trajectories and physical parameters of the system are developed. The formulation and derivations are carried out for a two‐link system. Digital computer simulations of a two‐rigid body system are presented to demonstrate the feasibility and effectiveness of the methods. © 2005 Wiley Periodicals, Inc.