Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Kinetics of Thermal Dehydroxylation and Carbonation of Magnesium Hydroxide

The kinetics of simultaneous dehydroxylation and carbonation of precipitated Mg(OH)₂ were studied using isothermal and nonisothermal thermogravimetric analyses. Specimens were analyzed using X-ray diffraction, transmission electron microscopy, and through measurements of the volume of carbon dioxide evolved in a subsequent reaction with hydrochloric acid. From 275° to 475°C, the kinetics of isothermal dehydroxylation in helium were best fit to a contracting-sphere model, yielding an activation energy of 146 kJ/mol, which was greater than values reported in the literature for isothermal dehydroxylation under vacuum (53–126 kJ/mol). The carbonation kinetics were complicated by the fact that dehydroxylation occurred simultaneously. The overall kinetics also could be fit to a contracting-sphere model, yielding a net activation energy of 304 kJ/mol. The most rapid carbonation kinetics occurred near 375°C. At this temperature, Mg(OH)₂ underwent rapid dehydroxylation and subsequent phase transformation, whereas thermodynamics favored the formation of carbonate. During carbonation, MgCO₃ precipitated on the surface of disrupted Mg(OH)₂ crystals acting as a kinetic barrier to both the outward diffusion of H₂O and the inward diffusion of CO₂.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

The Effect of Subfilter-Scale Physics on Regularization Models

The subfilter-scale (SFS) physics of regularization models are investigated to understand the regularizations’ performance as SFS models. Suppression of spectrally local SFS interactions and conservation of small-scale circulation in the Lagrangian-averaged Navier-Stokes α-model (LANS-α) is found to lead to the formation of rigid bodies. These contaminate the superfilter-scale energy spectrum with a scaling that approaches k ⁺¹ as the SFS spectra is resolved. The Clark-α and Leray-α models, truncations of LANS-α, do not conserve small-scale circulation and do not develop rigid bodies. LANS-α, however, is closest to Navier-Stokes in intermittency properties. All three models are found to be stable at high Reynolds number. Differences between L ² and H ¹ norm models are clarified. For magnetohydrodynamics (MHD), the presence of the Lorentz force as a source (or sink) for circulation and as a facilitator of both spectrally nonlocal large to small scale interactions as well as local SFS interactions prevents the formation of rigid bodies in Lagrangian-averaged MHD (LAMHD-α). LAMHD-α performs well as a predictor of superfilter-scale energy spectra and of intermittent current sheets at high Reynolds numbers. It may prove generally applicable as a MHD-LES.     

Unsupervised Extraction of Structural Information from High Dimensional Visual Data

We present three unsupervised artificial neural networks for the extraction of structural information from visual data. The ability of each network to represent structured knowledge in a manner easily accessible to human interpretation is illustrated using artificial visual data. These networks are used to collectively demonstrate a variety of unsupervised methods for identifying features in visual data and the structural representation of these features in terms of orientation, temporal and topographical ordering, and stereo disparity.     

One-dimensional axial simulation of electric double layer overlap effects in devices combining micro- and nanochannels

This paper presents a numerical steady-state model of ion transport in micro- and nanofluidic devices with widely varying geometric scale, such as transitions between micro- and nanochannels. Finite element or finite volume simulation of such problems is challenging, due to the number of elements needed to produce a satisfactory mesh. Here, only the lengthwise channel dimension is meshed; standard analytical approximations are used to incorporate cross-channel properties. Singularly perturbed cases are built up by continuation. The method is shown to reproduce our previously reported measurements of electric double-layer effects on conductivity, ion concentration, and ion enhancement and depletion. Comparison with 2-D simulations reported in the literature shows that effects on accuracy due to the 1-D approximation are small. The model incorporates analytical models of surface charge density taken from the literature. This enables predictive simulation with reasonable accuracy using published parameter values, or these values may be tuned based on experiment to give improved results. Use of the model for iterative design and parameter estimation is demonstrated.     

Modeling Task Switching Without Switching Tasks: A Short-Term Priming Account of Explicitly Cued Performance.

Switch costs in task switching are commonly attributed to an executive control process of task-set reconfiguration, particularly in studies involving the explicit task-cuing procedure. The authors propose an alternative account of explicitly cued performance that is based on 2 mechanisms: priming of cue encoding from residual activation of cues in short-term memory and compound cue retrieval of responses from long-term memory. Their short-term priming account explains the repeated cue encoding benefit, switch cost, reduction in switch cost with preparation time, and other effects. The authors develop a mathematical model of their priming account and fit it to data from 3 experiments, demonstrating that a set of basic psychological processes can produce several effects--including putative switch costs--without switching tasks. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

In-plane contributions to phase contrast in intermittent contact atomic force microscopy

Contrast in the phase response of intermittent-contact atomic force microscopy (IC-AFM) reveals in-plane structural and mechanical properties of polymer monolayers. This result is unexpected, as IC-AFM has previously only been considered as a probe of out-of-plane properties. Until now, AFM measurements of nanoscale in-plane properties have employed contact mode techniques. In-plane property measurements are possible with intermittent contact AFM because there is a small but significant component of tip motion parallel to the sample surface. This in-plane component of tip displacement is virtually universal in AFM, implying that oscillating-tip techniques generally are sensitive to in-plane material properties. We present a simple Hertzian model of intermittent-contact AFM that includes such an in-plane displacement.     

Mechanochemical Synthesis of Cerium Monosulfide

Cerium sulfides were prepared by high‐energy milling of cerium and sulfur. The reaction kinetics were observed by monitoring temperature and pressure in situ. For the first time, it is demonstrated that cerium monosulfide, which has historically been produced only at very high temperatures using both toxic and flammable gases, can be produced from a stoichiometric mixture of the elemental powders at near room temperature. It is shown that the monosulfide is produced through a mechanochemically induced self‐propagating reaction of intermediate compounds.