Assessment of Mixture and Eulerian Multiphase Models in Predicting the Thermo-Fluidic Transport Characteristics for Fly Ash-Water Slurry Flow in Straight Horizontal Pipeline

The thermo-fluidic transport characteristics of the fly ash–water slurry flow in a straight horizontal pipe are predicted by deploying two different multiphase modeling strategies, viz. the mixture and the Eulerian multiphase models. Comparisons between the two model predictions in terms of the pressure drop and heat transfer coefficient are done along with the comparisons between the single (water) and the two phase system (slurry). Spherical fly ash particles, with diameter of 13 µm for an average inflow velocity ranging from 1 to 5 m/s and particle concentrations within 0–40% by volume for each velocity are considered as the dispersed phase carried by the carrier phase water. Significant differences between the two model predictions can be observed both from the qualitative and quantitative perspectives. This finally leads to the appropriate choice of the multiphase model for predicting the thermo-fluidic transport characteristics in slurry flow.     

Dynamics of fluid circulation in coupled free and heterogeneous porous domains

Fluid flow in coupled free and porous domain, particularly when the porous medium is heterogeneous, is encountered in many hydro-environmental conditions, e.g., leakage from underground pipe, combined groundwater lake-subsurface interactions. One of the most difficult problems in the study of coupled flow behaviour has been the development of a universally applicable modelling scheme for combining the flow regimes. This is because the free/porous interfacial properties (e.g., shear-stress; velocity slip) that govern the coupled flow behaviour are difficult to determine experimentally under hydro-environmental conditions. On the other hand, the implications of various forms of heterogeneity in the porous media properties can be very different on the fluid-flow behaviour. Difficulties may also arise in direct coupling of the model equations that govern the fluid flow in the individual regions (e.g., Navier-Stokes for free-flow region and the Darcy's equation for the porous flow region). Consequently, models of coupled free and porous flow for hydro-environmental conditions are not very well developed at the moment. While there are some indications that fluids in coupled free and porous domains may circulate (i.e., development of flow cells), there is a lack of appropriate 3D analysis on how heterogeneities in porous media may affect such flow patterns. In this paper, we aim to analyse how porous media heterogeneity affects the dynamics of flow circulation in the porous side of a coupled free and porous domain. For this purpose, we analyse flow patterns in several model domains made up of two porous layers with differing permeabilities. The governing model equations are discretised and solved using the standard finite volume method on a staggered cell-centred mesh. The temporal discretisation is done using the explicit method. An in-house graphical user interface (GUI) has been created specifically to aid in the visualisation of otherwise complex flow patterns. The GUI contains many post-processing options and provides a comprehensive tool for the analysis of hydrodynamics and contaminant motion (not discussed in this paper) in coupled free and porous flow domains. This GUI is described in this paper briefly. The effects of altering the aspect ratio (i.e., multi-scale) of the domain on the coupled flow pattern have also been discussed.     

Green composites based on high‐density polyethylene and Saccharum spontaneum: Effect of filler content on morphology,thermal, and mechanical properties

Here we report the preparation and characterization of a green composite based on high‐density polyethylene and Kaans grass (Saccharum spontaneum). The composites were prepared by conventional melt‐mixing method, using maximum loading of Kaans grass in powder form (KG‐filler) to achieve acceptable range of required properties. Maleic anhydride grafted polyethylene was used as compatibilizer to achieve effective interaction for improved surface adhesion which was confirmed by FT‐IR spectroscopy. Morphological studies revealed good interaction between the base polymer matrices and the KG‐fillers that improved the mechanical and thermal properties of the composites up to certain (10 phr) KG‐filler loading. Study on water absorption property revealed moderate increase in weight at higher KG‐filler loadings. Thermogravimetric analysis (TGA) and melt flow index (MFI) studies indicated retention of thermal stability and flow property of the HDPE/KG‐filler composite at lower filler loadings. POLYM. COMPOS., 36:2157–2166, 2015. © 2014 Society of Plastics Engineers     

Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel

Abstract

The current research comprises of various machinability aspects of 4340 hardened alloy steel which are scrutinized with in context of improvements in main cutting force, tool flank wear, crater wear, surface roughness, micro-hardness, machined surface morphology, chip morphology, chip reduction coefficient and apparent coefficient of friction under three different cutting fluid applications i.e. compressed air, water soluble coolant and nanofluid (using eco-friendly radiator coolant as the base fluid and Al₂O₃ as the nanoparticle) using uncoated cermet cutting inserts and a comparative assessment was performed to select which fluid performed better in terms of various machining attributes among three cutting fluids. The minimum quantity lubrication technique (MQL) was used in which a smaller volume of coolant sprinkled at high pressure. This method is found as the most effective alternative to minimize health risks and machining costs, which is quite high in other setups. The test specimen was machined at three different cutting speeds i.e. 100, 120 and 140?m/min along with two machining parameters i.e. feed and depth of cut were kept constant respectively at 0.2?mm/rev and 0.4?mm. Outcomes made a conclusion that Al₂O₃ enriched ecofriendly nanocoolant outperformed both compressed air and water soluble coolant in terms of every machinability aspects.     

Node discovery in networks

This paper abstracts the problem of network nodes discovering one another in a network of unknown size using all-to-all gossip. The problem is studied in terms of evolving directed graphs where each vertex represents a participating node and each edge represents one node’s knowledge about another. Ideally, such a graph has diameter one, i.e., each node knows all others. Nodes share their knowledge by sending gossip messages. Gossip among the nodes allows them to discover one another, decreasing the diameter of the graph. Here this problem is considered in several synchronous settings under different assumptions about the ability of the participating nodes to communicate. Specifically, the following aspects of communication are considered: (1) the ability of the nodes to multicast gossip messages, and (2) the size of the messages. The results describe the lower and upper bounds on the number of synchronous rounds required for the participants to discover each other. A particular question of interest is: if the network size is unknown, how does a node know that it has discovered all other nodes? Given a weakly-connected graph describing the initial knowledge of the nodes, every node in our algorithm can stop the discovery process knowing that there are no unknown nodes—this is done without any prior knowledge of the total number of nodes participating in the computation.     

Study on Alloying Behaviour of Uranium Zirconium Alloy

Uranium–zirconium alloy is the potential candidate material as metallic fuels for nuclear reactor applications. Fabrication of uranium zirconium alloy can be made either by powder metallurgy or by melting method. Both the method has its own advantages and selection of the fabrication route depends on its application as fuel. In this work investigations were carried out on fabrication of uranium–zirconium alloys (i.e. U–40 wt% Zr, U–50 wt% Zr, U–60 wt% Zr and U–70 wt% Zr) using both powder metallurgy and melting method. It is heat treated at different conditions. Apart from other characterization, X-ray diffraction analysis was carried out to evaluate phase content of the alloy and reported here.     

Microalgae Chlorella as a potential bio-energy feedstock

Microalgae are promising biomass species owing to their fast growth rate and high CO₂ fixation ability as compared to terrestrial plants. Microalgae have long been recognized as potentially good source for biofuel production because of their high oil content and rapid biomass production. In this study Chlorella sp. MP-1 biomass was examined for its physical and chemical characteristics using Bomb calorimeter, TGDTA, CHN and FTIR. The proximate composition was calculated using standard ASTM methodology. Chlorella sp. MP-1 biomass shows low ash (5.93%), whereas high energy (18.59 MJ/kg), carbohydrate (19.46%), and lipid (28.82%) content. The algal de-oiled cake was characterized by FTIR spectroscopy and thermogravimetric study at 10 °C/min and 30 °C/min to investigate its feasibility for thermo-chemical conversion. The present investigation suggests that within the realm of biomass energy technologies the algal biomass can be used as feedstock for bio and thermo-chemical whereas the de-oiled cake for thermo-chemical conversion thereby serving the demand of second generation biofuels.     

An Artificial-Neural-Network-Based Integrated Regional Model for Rain Retrieval Over Land and Ocean

An integrated regional model is proposed for rain-rate retrievals over land/ocean from the brightness temperature (Tb) values of the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI). The polarization-corrected temperature calculated from the 85.5-GHz channels is also considered as one of the inputs along with the nine channel Tb values. This model is applicable over the region between and . For this purpose, an artificial neural network is utilized. The collocated precipitation radar (PR) near-surface rain rates as given by a 2A25 data product is considered as a target value. The methodology consists of the separation of land and ocean pixels, the separation of stratiform and convective pixels over land/ocean, and the selection of important features (inputs) for the multilayer perceptron network by the feature selection technique for each group. For the separation of land/ocean pixels, the Tb values of the 10.65-GHz vertical channel are utilized. The values are utilized to separate the stratiform and convective pixels both over land and ocean. The rain retrieval from the developed model is validated with TRMM PR. Overall result shows the better agreement of the model-retrieved rain rate with the PR observation compared to the TMI (2A12) rain rate particularly over land. The rain retrieved from the developed model is further validated with Doppler weather radar. A reasonably good agreement is observed between these two estimations.