Efficient Design of Bi-circular Patch Antenna for 5G Communication with Mathematical Calculations for Resonant Frequencies

Wireless Personal Communications - In this paper the conventional circular patch has been reshaped by two circular arcs with the FR4 Epoxy material for substrate. This is supported by the...     

Sintering studies of nano-crystalline zinc oxide

Sintering and grain growth of nano-crystalline undoped ZnO has been studied in detail over a wide range of temperature and holding time. Below 800 °C, sintering of over 70% theoretical density is not observed, irrespective of particle size. At 900 °C for 6 h, the nano-crystalline sample sinters to 99% of theoretical density whereas the density for as received sample is 93% of theoretical density. However, at 1300 °C or higher, the densification is found to be much faster and after a few hours becomes independent of holding time. Grain growth studies reveal a similar feature of attaining saturation over holding time. The average saturated grain size is found to be ∼1.5 and ∼2.2 μm at 800 and 900 °C, respectively, while at 1300 °C or higher, it is in between 12 and 13 μm.     

Bayes estimators for reliability measures in geometric distribution model using masked system life test data

This paper presents Bayes estimators for the reliability measures of the individual components in a multi-component systems in the presence of masked system life test data. The life time distributions of the system components are assumed to be geometric with different parameters. Two-sided Bayesian probability intervals of the parameters are also derived. Numerical simulation study is given in order to: (i) explain how one can apply the theoretical results obtained, (ii) study the influence of the sample size and masking level on the accuracy of point estimates.     

Compact wideband bandpass filter

Designing wideband bandpass filters (BPF) with parallel-coupled microstrip lines requires tight coupling resulting in close separation between the lines and difficulty of fabrication. Here, it is shown that the etched slots in the ground plane of the parallel coupled lines can significantly increase the coupling. This technique has been extended to realize ultra-wideband BPFs having 3-dB fractional bandwidth greater than 100% and low insertion loss in the passband.     

The uptake of fenbendazole by cattle and buffalo following long-term low-level administration in urea-molasses blocks: further studies on block formulations

Fenbendazole (Hoechst India Ltd.) was incorporated at 0.5 g/kg into urea molasses blocks made by two different processes. The proportion of the drug remaining in the blocks and the plasma concentrations of the parent compound and its metabolites were measured. Recovery of the drug in blocks made by the cold and the modified hot processes was 90% and 96%, respectively. The plasma metabolite profile revealed a plateau between days 4 and 6 of feeding in cattle and buffalo. However, the plasma concentrations of fenbendazole and its metabolites were low in buffalo compared to cattle.     

Mössbauer Study of the Influence of Fe-Si-N Liquid in the Synthesis of β-Si3N4 from Silica

Mössbauer spectra of the products obtained by carbothermal reduction and distribution of silica in the presence of iron in the temperatures range 1200^o to 1540^o were studied. The preponderance of β- Si₃N₄ over the α form at a higher reaction temperature were assumed to be related to the formation of an Fe-Si-N liquid. The liquid did not alter its composition with the variation of reduction-temprature, Iron had no effect on the reaction mechanism below 1300^oC.     

Characterization of Nanocrystalline Bismuth Telluride (Bi2Te3) Synthesized by a Novel Approach Through Aqueous Precursor Method

Bi₂Te₃-based alloys are currently best-known, technologically important thermoelectric materials near room temperature. In this paper, nanocrystalline Bi₂Te₃ was synthesized by an aqueous solution technique based on the reaction between the aqueous solution of Bi-ethylenediamine tetraaceticacid (EDTA), TeO-EDTA, and NaBH₄ at room temperature. NaBH₄ was used as a reducing agent. TeO-EDTA was prepared from TeO₂ after satisfactory purification. The sample purity was examined by selected area energy dispersive X-ray analysis. The products were characterized by X-ray diffraction and high-resolution transmission electron microscopy by which the particle morphologies and size were studied. The particle size ranges from 60 to 90 nm.     

A parametric study of strength reduction factors for elasto-plastic oscillators

Strength reduction factors (SRFs) continue to play a key role in obtaining design forces from elastic design spectra (via response modification factors) in ductility-based earthquake-resistant design. Despite several years of sustained research efforts, it has not been conclusively shown how SRF for a given singledegree-of-freedom structural system depends on various source and site parameters. A parametric study is carried out here for the explicit dependence of SRF spectrum (describing variation of SRF with system period for a given ductility demand) on strong motion duration, earthquake magnitude, geological site conditions, and epicentral distance in case of (non-degrading) elasto-plastic oscillators. For this, scaled response spectra are considered for different combinations of earthquake magnitude, site conditions and epicentral distance, and SRF spectra are generated from 1274 accelerograms recorded in western USA after making those compatible with each of these spectra. It is shown that there is no clear and significant dependence of SRF spectrum on strong motion duration. Further, the parametric dependence on earthquake magnitude, site conditions, and epicentral distance broadly conforms to the trends reported by earlier investigations. In particular, this study confirms that the dependence of SRF spectra on earthquake magnitude should not be ignored. This paper has been contributed in honour of Professor R N Iyengar, Indian Institute of Science, on the occasion of his formal retirement.     

Study of polyaniline polyacrylamide composites by positron annihilation technique

Polyaniline doped with nonoxidizing Bronsted acids is recognized as a conducting material, as its electrical conductivity changes with percentage of doping. In the present work, different percentages of doped polyaniline were blended with polyacrylamide and their electrical conductivities as well as the positron annihilation lifetimes were measured. Analysis of data yielded three lifetime components. It was observed that the value of the short lifetime component remained constant for doping concentration, whereas that of the intermediate component τ₂ decreased. The relative intensity pertaining to τ₂, however, increased with the increase in doped PANI concentration. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 930–933, 2003