Comparison of Two Drying Schedules for European Hophornbeam (Ostrya carpinifolia Scop.) Lumber

Two types of conventional kiln-drying schedules (mild and harsh) based on moisture content (MC) were compared with regard to time, drying quality, and energy cost. The results were evaluated according to the classification of the European Drying Group. Proper drying periods of mild and harsh schedules were found to be 550 and 514 h, respectively. Evaluations in terms of drying quality indicated that better results were achieved with the mild schedule, especially when comparing drying defects and final MC. From an energy efficiency point of view, the harsh schedule, by saving 36 h of drying time, reduced electricity by 594 KWh and was therefore found to be $65 more profitable in this trial.     

Barrier height temperature coefficient in ideal Ti/n-GaAs Schottky contacts

We have measured the I-V characteristics of Ti/n-GaAs Schottky barrier diodes (SBDs) in the temperature range of 60-320 K by the steps of 20 K. The SBDs have been prepared by magnetron DC sputtering. The ideality factor n of the device has remained almost unchanged between 1.02 and 1.04 from 120 to 320 K, and 1.10 at 100 K. Therefore, it has been said that the experimental I-V data are almost independent of the sample temperature and quite well obey the thermionic emission (TE) model at temperatures above 100 K. Furthermore, the barrier height (BH) Φ_b0 slightly increased with a decrease in temperature, 320-120 K. The Φ_b0 versus temperature plot from intercepts of the forward-bias ln I versus V curves has given a BH temperature coefficient of α = −0.090 meV/K. The Norde’s function has been easily carried out to determine the temperature-dependent series resistance values because the TE current dominates in the I-V characteristics. Therefore, the Φ_b0 versus temperature plot from the Norde’s function has also given a BH temperature coefficient value of α = −0.089 meV/K. Thus, the negligible temperature dependence or BH temperature coefficient close to zero has been attributed to interface defects responsible for the pinning of the Fermi level because their ionization entropy is only weakly dependent on the temperature.     

A 0D Lead‐Free Hybrid Crystal with Ultralow Thermal Conductivity

Organic–inorganic hybrid materials are of significant interest owing to their diverse applications ranging from photovoltaics and electronics to catalysis. Control over the organic and inorganic components offers flexibility through tuning their chemical and physical properties. Herein, it is reported that a new organic–inorganic hybrid, [Mn(C₂H₆OS)₆]I₄, with linear tetraiodide anions exhibit an ultralow thermal conductivity of 0.15 ± 0.01 W m^?1 K^?1 at room temperature, which is among the lowest values reported for organic–inorganic hybrid materials. Interestingly, the hybrid compound has a unique 0D structure, which extends into 3D supramolecular frameworks through nonclassical hydrogen bonding. Phonon band structure calculations reveal that low group velocities and localization of vibrational energy underlie the observed ultralow thermal conductivity, which could serve as a general principle to design novel thermal management materials.     

Dependence of grip strength on shoulder position and its implications for ergonomics practice

Grip strength (GS) variability due to positional changes in the upper extremity joints is of importance while designing workstations and work methods. This study was conducted to analyze the GS variations due to positional changes at shoulder joint when some important variables were under control. The GSs of dominant and nondominant hands were measured in eight shoulder (0°, 45°, 90°, and 135° of flexion and abduction) and standard test positions (STP). One hundred and thirteen subjects 20–30 years old completed the study. At the dominant side, no significant difference was observed in the pairwise comparisons between STP and the others. Maximum and minimum GSs were obtained in 0° abduction and 45° flexion and abduction, respectively. At the nondominant side, GSs were significantly lower (p < 0.001) in the corresponding test positions and demonstrated more variability. The findings of this study can contribute to the available knowledge to guide occupational ergonomists in their practices.     

Chemometric approach to evaluate trace metal concentrations in some spices and herbs

Herbs (mint, thyme and rosemary) and spices (black pepper, chili pepper, cinnamon, cumin, sweet red pepper and turmeric) were analysed using atomic spectrometry and then subjected to chemometric evaluation in an attempt to classify them using their trace metallic analyte concentrations (As, Ba, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Sr and Zn). Trace metals in acid digests of these materials were determined using both inductively coupled plasma-atomic emission spectrometry and inductively coupled plasma-mass spectrometry. The chemometric techniques of principal component analysis (PCA), linear discriminant analysis (LDA) and cluster analysis (CA) were used for the classification studies. These herbs and spices were classified into five groups by PCA and CA. When the results of these techniques were compared with those from LDA, it was found that all group members determined by PCA and CA are in the predicted group that 100.0% of original grouped cases correctly classified by LDA.     

Preparation and properties of lubricant basestocks from epoxidized soybean oil and 2-ethylhexanol

Synthetic lubricant basestocks were prepared from epoxidized soybean oil (ESO) and 2-ethylhexanol (2-EH) to be used alone or with polyalphaolefin (PAO). Sulfuric acid-catalyzed reaction of ESO with 2-EH involves a ring-opening reaction at the epoxy group followed by transesterification at the ester group. Reaction with other catalysts including p-toluenesulfonic acid, Dowex 50W-8X, boron trifluoride, and sodium methoxide was also examined. Pour points of the products were observed as lows as −21 and −30°C without and with 1% of pour point depressant, respectively. When the hydroxy groups in the products were esterified with an acid anhydride, lower pour points were observed. Pour point depression of the product by adding PAO has been tested. Oxidative stability of the product was examined using pressurized DSC and compared with those of synthetic lubricant basestocks, PAO, and a synthetic ester.     

Determination of the quality and purity characteristics of olive oils obtained from different regions of Turkey,depending on climatic changes

Virgin olive oils (VOOs) obtained from olives grown in different regions of Turkey under changing climatic conditions sometimes show different sensory and chemical properties. This study was planned to determine whether these deviations are due to climatic changes or not. For this purpose, five different olive varieties (Ayvalık, Memecik, Gemlik, Nizip Yağlık, Kilis Yağlık) of commercial importance were harvested from the provinces/districts (four different region) where cultivation is intense during the 2017/2018–2020/2021 harvest years. Every year, olive samples were collected from 3 orchards from 13 provinces/districts. One hundred and fifty-six samples were subjected to the purity, quality and sensory analysis. Basic climatic values (average, minimum and maximum temperature, humidity and precipitation) were examined for four consecutive years. All of the examined olive oil samples were determined within the legal limits in terms of fatty acid composition and fatty acid ethyl ester values. However, delta-7-stigmastenol value from the sterol composition was found to be above 0.5% in some samples in all the years studied (total 21 samples). Delta-7-stigmastenol values of olive oil samples varied between 0.16% and 1.14%. Multiple linear regression analysis was applied using a genetic algorithm-based inverse least squares method to determine whether there is a relationship between climate data and delta-7-stigmastenol values. According to this result, it has been determined that the delta-7-stigmastenol value is high when the annual average relative humidity is low and the annual average temperature is high. There is an urgent need to make forward-looking plans due to climate change.     

Synthesis of triphenyl phosphine oxide‐containing polymers via atom transfer radical polymerization

Bis[(4 ‐β‐(2‐bromopropanoate)ethoxy)phenyl]phenylphosphine oxide was used for the first time as the initiator of atom transfer radical polymerization of styrene and methyl methacrylate in the presence of CuBr/N, N,N′, N″, N″‐pentamethyldiethylenetriamine as catalyst/ligand and dimethyl sulfoxide as solvent. The presence of phosphine oxide linkages in the backbone gives the polymers special properties; low T_g, high char yield, and decreases the oxygen induction time value. A linear increase of number average molecular weight (M_n) versus monomer conversion was observed, and the molecular weight distribution was relatively narrow (M_w/M_n = 1.1–1.3). FTIR, ¹HNMR, gel permeation chromatography, ultraviolet spectroscopies were used for the characterization of the related polymers. The thermal properties of these polymers were investigated by differential scanning calorimetry and thermogravimetric analysis. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

ENVIRONMENTALLY CONSCIOUS HOIST SCHEDULING FOR ELECTROPLATING FACILITIES

Hoist scheduling in electroplating operations has long been considered a key factor for improving the production rate. It has recently been recognized that hoist scheduling can also play an important role in waste minimization. In this work, a new hoist scheduling method is introduced for simultaneously achieving both the economic and environmental goals. A two-step dynamic optimization algorithm is introduced for identifying an optimal hoist schedule that can minimize the quantity and toxicity of wastewater streams from an electroplating line without loss of production rate. To improve computational efficiency, an engineering approach is adopted to reduce the number of binary decision variables in the optimization problem. An application to an actual electroplating process shows a significant reduction of both chemical and water consumption, which equates to a simultaneous realization of wastewater reduction and increase of profits.