High yield formation of carbon nanotubes using a rotating cathode in open air

Carbon nanotubes (CNTs) have been synthesized using the arc discharge method with a rotating graphite disc as the cathode. Arcing was carried out in open air and without the use of catalysts. The current density was maintained constant through out the experiment, while, the rate of rotation of the cathode and atmosphere under which arcing was carried out were changed during experimentation. Characterization of the samples produced indicates that rotation of the cathode has a significant impact on the quality and yield of the process. It is proposed that rotation of the cathode drags plasma formed between two electrodes away from high temperature region. This results in a sudden quenching of the reactive plasma. The time available for nucleation and growth phenomena is significantly reduced and thus leads to the formation of highly graphitic multi walled CNTs (yield 60%) and traces of double walled CNTs.     

From particle-mass to multibody systems: graph-theoretic modeling

The distinction between geometry and dynamic interactions is fundamental for the consistent dynamic analysis of physical systems. A unified treatment of such systems is possible when we adopt a hierarchical mathematical model with a consistent set of embedded abstractions. This new view is adopted in the general formulation strategy for obtaining a simplified dynamics model of mechanical systems. We show that there exists a consistent general extension from the model of constrained particle-mass systems (PMS) to the model of multibody systems (MBS) based entirely on graph-theoretic concepts     

Minimum entropy and information measure

Kapur et al. (1995) introduced the MinMax information measure, which is based on both maximum and minimum entropy. The major obstacle for using this measure, in practice, is the difficulty in finding the minimum entropy. An analytical expression has already been developed for calculating the minimum entropy when only variance is specified. An analytical formula is obtained for calculating the minimum entropy when only mean is specified, and numerical examples are given for illustration     

Accelerated Fretting Wear Tests for Contacts Exposed to Atmosphere

Engineering components can be subjected to normal and/or rotational fretting wear with contacts that are intermittently exposed to the atmosphere. Exposure to the environment may lead to the alteration at the contact due to the changing role of third body particles such as hard oxides which can result in abrasion. The abrasion due to hard oxide particles differs for the closed contact and intermittently opened contact. In the former scenario, the oxides are compacted into tribo-film, while in the latter case they remain loose, leading to bigger role of abrasion. Standard fretting test setup employed to estimate the fretting wear characteristic operates with a constant load such that the contact remains closed between the counter surfaces and does not simulate the opening and closing of the contacts as observed in certain applications. The forceful interruptions to the experiments to simulate open and close condition of the contact require considerable amount of time and effort. In this paper, an accelerated test procedure is proposed and investigated to capture the effect of intermittent opening of the contact without stopping the experiments. A test rig is designed to simulate the opening and closing conditions, and tests were performed with abrasive diamond-like particles. Friction and wear results are compared with those of intermittently contact opening conditions along with operating wear mechanisms. Scanning electron microscope analysis showed that the wear mechanism observed in the case of fretting with intermittent opening of contact is similar to that of fretting with diamond-like abrasives at the contact.     

Influence of 2,3-Dihydroxyflavanone on Corrosion Inhibition of Mild Steel in Acidic Medium

The inhibition effect of 2,3-dihydroxyflavone on the corrosion of mild steel in 100-600 ppm aqueous hydrochloric acid solution has been investigated by weight loss and electrochemical impedance spectroscopy. The corrosion inhibition efficiency increases with increasing concentration and time. The effect of temperature on the corrosion behavior of mild steel in 1 M HCl with addition of inhibitor was studied at the temperature range of 300-330 K. UV-Vis, FTIR, and surface analysis (SEM) was also carried out to establish the corrosion inhibitive property of this inhibitor in HCl solution. The adsorption of this inhibitor on the mild steel surface obeys the Langmuir adsorption isotherm. Electrochemical studies reveal that the inhibitor is a cathodic type.     

Effect of Fiber Orientation and Stacking Sequence on Mechanical and Thermal Characteristics of Banana-Kenaf Hybrid Epoxy Composite

The usage of hybrid natural composites has surged in almost all fields of engineering due to their advantage of possessing high strength to weight ratio and biodegradability. This paper deals with the fabrication and investigation of mechanical and thermal properties of banana-kenaf glass fiber reinforced epoxy composite which is relatively a newer hybrid composite. In this study, the composite is fabricated by a hand layup process with different fiber orientations and also with different volume fractions. The composites are prepared with five different proportions of banana-kenaf fibers. Various mechanical and thermal tests are conducted and the result shows that the hybrid composite in which fibers are arranged at 45⁰ inclination has better properties than the others. Also, failure morphology analysis is done using a Scanning Electron Microscope (SEM) through which the internal structures of the tested specimen are analysed.     

Comparison of Particle Number Counts Measured with an Ink Jet Aerosol Generator and an Aerodynamic Particle Sizer

Aerodynamic particle sizer (APS) users typically calibrate the particle sizing capabilities, but not the counting efficiency upon which aerosol concentration results are based. Herein, comparisons were made between the counts provided by an ink jet aerosol generator (IJAG) with those measured by an APS. Near-monodisperse (geometric standard deviation of about 1.06) liquid or solid aerosols in the size range of 0.95 to 13.3 μm aerodynamic diameter (AD) generated with an IJAG were released into the inner inlet-tube of the APS in a manner that rendered APS wall and aspiration losses negligible. For most experiments, the IJAG generated 75 particles/s, which rate was maintained by the IJAG system through control of electrical pulses applied to its ink jet cartridge. For particles in the size range of 2–13.3 μm AD, the ratio of relative detection efficiency (ratio of the number of particles counted by the APS to the number reported as generated by the IJAG) was 99.3 ± 1.4%; however, for test particles between 0.95 and 2 μm AD, the relative detection efficiency was somewhat lower, but the drop off was less than about 2%. This slight drop off is likely associated with the light scattering detection approach and corresponding counting algorithm of the APS. Tests were conducted where the IJAG produced 7.0 μm AD particles at rates of 1 to 500 s^-1 and the results showed essentially a 1:1 correspondence between IJAG and APS counts. The presence of smaller-sized background particles did not affect the measured APS counts of larger-sized challenge particles.

Copyright 2014 American Association for Aerosol Research     

The magnetic field problem: A graph-theoretic model

A numerical model for two-dimensional magnetic field problems called the graph-theoretic field model is presented. The theoretical framework of the model places the finite difference and Finite element method in a unifying perspective and brings the solution of magnetic field problems into the well-proven realm of computer-aided design of discrete physical systems. The field distribution in a transformer core is obtained to illustrate the modeling procedure.