Hierarchical micro-nanostructured albite-based glass-ceramic for high dielectric strength insulators

A novel glass-ceramic material based on albite type Na-rich feldspar has been synthesized by conventional ceramic process. High crystallinity, >94%?Vol.% is obtained by fast sintering which allows energy saving processing. Albite is the main crystalline phase and tetragonal SiO₂ is a secondary phase. Electrical properties were examined by complex impedance, DC measurements, and dielectric breakdown test. Dielectric characterization shows a non-Debye type dielectric behavior with low dielectric constant, 4.6 at 1?MHz, low dielectric losses, (～10^?3 at 1?MHz, and a large dielectric strength, ～60?kV/mm), that it is the largest value reported in ceramic insulators. Those dielectric properties are attained by the low glassy phase content in the samples and their unique micro-nanostructure. All these properties make this novel material a very promising candidate in the market of ceramic electrical insulator, highlighting for high-voltage applications.     

Using a multicultural lens to understand illnesses among Haitians living in America.

Currently, ethnic and racial minority individuals represent a large proportion of the U.S. population, and researchers expect that they will represent the majority of the population by 2050. This shift in U.S. demographics calls for a greater awareness and integration of cultural issues into the assessment and treatment of ethnically and linguistically diverse clients. This article examines the unique beliefs and manifestations of illnesses among Haitians in connection with the American Psychological Association's (APA, 2002) Multicultural Guidelines. The authors use a common culture-bound syndrome, Séizisman, to illustrate the cultural beliefs, assessment, and treatment of illnesses among Haitians. In so doing, they demonstrate how to incorporate the APA Multicultural Guidelines into treatment with clients of diverse cultural and racial backgrounds. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hydrogen adsorption studies in micro-size cobalt dots

Hydrogen desorption curves were obtained from a sample composed of a square arrangement of Co dots with average diameter of 4.4 μm, separated by a distance of 11.6 μm. A macroscopic sample of Co dots grown on a 2.5 × 2.5 cm Si substrate was made by standard lithographic techniques and used in these experiments. Thermal programmed desorption (TPD) was performed under ultra-high vacuum conditions. Hydrogen TPD curves were obtained from a 1 × 1 cm Co dots samples displaying a maximum of intensity at 425 K. Hydrogen TPD curve was also obtained from 1 cm× 1 cm samples of Co films and Co foils for comparison. The hydrogen TPD curves have decreasing intensity from the Co foils to the Co dots and finally to the Co films. This indicates that there are more sites for hydrogen adsorption on the Co dots than in the Co films. This is a surprising result because there is approximately 8.7 times less Co atoms exposed in the Co dots that in the Co film sample. A desorption energy of 27 kcal/mol was obtained for the Co dots suggesting that hydrogen is adsorbed on an hcp hollow site of the Co dot crystalline structure.     

Using ion implantation to adjust the transition temperature of superconducting films

We summarize a continuing investigation into using ion implantation to alter the transition temperature of superconducting thin films. The primary motivation for the work presented here was to study the feasibility of using magnetic ion doping to replace the bi-layer T_c control process currently used for certain cryogenic detector applications at National Institute for Standards and Technology. The results from work with various ion species implanted into aluminum, molybdenum, titanium and tungsten host films are presented.     

Evaluation and enhancement of COBRA-TF efficiency for LWR calculations

Detailed representations of the reactor core generate computational meshes with a high number of cells where the fluid dynamics equations must be solved. An exhaustive analysis of the CPU times needed by the thermal-hydraulic subchannel code COBRA-TF for different stages in the solution process has revealed that the solution of the linear system of pressure equations is the most time consuming process. To improve code efficiency two optimized matrix solvers, Super LU library and Krylov non-stationary iterative methods have been implemented in the code and their performance has been tested using a suite of five test cases. The results of performed comparative analyses have demonstrated that for large cases, the implementation of the Bi-Conjugate Gradient Stabilized (Bi-CGSTAB) Krylov method combined with the incomplete LU factorization with dual truncation strategy (ILUT) pre-conditioner reduced the time used by the code for the solution of the pressure matrix by a factor of 20. Both new solvers converge smoothly regardless of the nature of simulated cases and the mesh structures and improve the stability and accuracy of results compared to the classic Gauss–Seidel iterative method. The obtained results indicate that the direct inversion method is the best option for small cases.     

A scale model for fitting object shapes from fixed location data

In this paper we present a scale model for fitting an ideal shape to an object. The measurements of the object are taken corresponding to a fixed coordinate system at a set of well-defined locations on the surface of the object. We propose an algorithm to estimate the model parameters and hypothesis tests to make statistical inferences about several possible special cases of the general model. The model is tested with an example that analyzes data on the feet of people in Hong Kong.     

RBS/channelling study of ion-implanted and proton-exchanged LiNbO3:Nd:MgO planar waveguides

We present a structural study of two Nd³⁺/MgO codoped LiNbO₃ waveguides fabricated by two different methods: ion-implantation and proton-exchange. Rutherford backscattering spectrometry in combination with channelling was used to study the influence of the waveguide fabrication method on the possible modification of the LiNbO₃ crystal structure within the waveguiding layer. The results show that the ion-implanted waveguide mainly maintains the same properties as the virgin crystal, apart from a deterioration of a thin surface layer, whilst the proton-exchanged waveguide exhibits a quite different behaviour, although its surface is less damaged.