Inquiry-based mobile learning in secondary school science education: A systematic review

Recent years have seen a growing call for inquiry-based learning in science education, and mobile technologies are perceived as increasingly valuable tools to support this approach. However, there is a lack of understanding of mobile technology-supported inquiry-based learning (mIBL) in secondary science education. More evidence-based, nuanced insights are needed into how using mobile technologies might facilitate students' engagement with various levels of inquiry and enhance their science learning. We, therefore, conducted a robust systematic literature review (SLR) of the research articles on mIBL in secondary school science education that have been published from 2000 to 2019. We reviewed and analysed 31 empirical studies (34 articles) to explore the types of mIBL, and the benefits and constraints of mIBL in secondary school science education. The findings of this SLR suggest new research areas for further exploration and provide implications for science teachers' selection, use and design of mIBL approaches in their teaching.     

πSynthesis and evaluation of a series of α-hydroxy ethers derived from isopropyl oleate

Several fatty derivatives with bulky moieties were prepared by treatment of epoxidized isopropyl oleate with a number of alcohols in the presence of sulfuric acid catalyst to provide a series of α-hydroxy ethers in good yield. The materials were analyzed for cold flow performance through cloud point and pour point determinations. The most promising α-hydroxy ether produced in this study, with respect to both low temperature behavior and economic criteria, was isopropyl 9(10)-(2-ethylhexoxy) 10(9)-hydroxystearate, which has a cloud point of −23°C and pour point of −24°C.     

Preparation, characterization and mechanical properties of epoxidized soybean oil/clay nanocomposites

New epoxidized soybean oil (ESO)/clay nanocomposites have been prepared with triethylenetetramine (TETA) as a curing agent. The dispersion of the clay layers is investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD and TEM data reveal the intercalated structure of ESO/clay nanocomposites has been developed. The thermogravimetric analysis exhibits that the ESO/clay nanocomposites are thermally stable at temperatures lower than 180 °C, with the maximum weight loss rate after 325 °C. The glass transition temperature, T_g, about 7.5 °C measured by differential scanning calorimetry (DSC) and T_g about 20 °C measured by dynamic mechanical study have been obtained. The difference in the T_g between DSC and dynamic measurements may be caused by different heating rate. The nanocomposites with 5-10 wt% clay content possess storage modulus ranging from 2.0×10⁶ to 2.70×10⁶ Pa at 30 °C. The Young's modulus (E) of these materials varies from 1.20 to 3.64 MPa with clay content ranging from 0 to 10 wt%. The ratio of epoxy (ESO) to hydrogen (amino group of TETA) greatly affects dynamic and tensile mechanical properties. At higher amount of TETA, the nanocomposites exhibit stronger tensile and dynamic properties.     

Preparation and characterization of PVA/OMMT composites

In this study, polyvinyl alcohol/organically modified montmorillonite (HDA/MMT; organoclay) composite was prepared for the intercalation processes. Firstly, the rheological behavior of aqueous montmorillonite dispersions was investigated as a function of solid content. Hexadecylamine (HDA) was added to the montmorillonite dispersion (2%, w/w) in different concentrations in the range of 5 × 10^?4 – 9 × 10^?3 mmol/L. The basal spacing of the organoclay (OMMT) was studied by X‐ray diffraction. The FTIR spectra are obtained from the modified montmorillonite products, which revealed the characteristic absorbencies after treatment with HDA. HDA/MMT/PVA composite, which was produced by the reaction of 1 wt % PVA solution with organoclay complex, is characterized by the rheology, electrokinetic, XRD, FTIR, and SEM techniques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2315–2323, 2006     

Stochastic Model for Landfill Gas Transport and Energy Recovery

Predicting the amount of landfill gas (LFG) that will be recovered at a sanitary landfill is generally associated with a high level of uncertainty, which is primarily due to the uncertainty in the definition of the parameters that control the LFG generation rate and LFG transport. To quantify these uncertainties, a three-dimensional stochastic model for the generation and transport of LFG is proposed. Using Monte Carlo simulations, multiple realizations of key input parameters are generated. For each realization, LFG transport is simulated and then used to evaluate probabilistically the rates and efficiency of energy recovery. For demonstration, the stochastic model is applied to the Kemerburgaz landfill in Istanbul, Turkey. Uncertainty in the definition of three key parameters, namely: the LFG production rate, the waste gas permeability and the soil cover gas permeability were accounted for. Modeling results suggest that the collection system is sufficient to capture most of the generated gas, but that uncertainty in the factors controlling LFG production is the main source of uncertainty in the amount of energy that will be recovered.     

Excitation energy-dependent nature of Raman scattering spectrum in GaInNAs/GaAs quantum well structures

The excitation energy-dependent nature of Raman scattering spectrum, vibration, electronic or both, has been studied using different excitation sources on as-grown and annealed n- and p-type modulation-doped Ga_1 − xIn_xN_yAs_1 − y/GaAs quantum well structures. The samples were grown by molecular beam technique with different N concentrations (y = 0%, 0.9%, 1.2%, 1.7%) at the same In concentration of 32%. Micro-Raman measurements have been carried out using 532 and 758 nm lines of diode lasers, and the 1064 nm line of the Nd-YAG laser has been used for Fourier transform-Raman scattering measurements. Raman scattering measurements with different excitation sources have revealed that the excitation energy is the decisive mechanism on the nature of the Raman scattering spectrum. When the excitation energy is close to the electronic band gap energy of any constituent semiconductor materials in the sample, electronic transition dominates the spectrum, leading to a very broad peak. In the condition that the excitation energy is much higher than the band gap energy, only vibrational modes contribute to the Raman scattering spectrum of the samples. Line shapes of the Raman scattering spectrum with the 785 and 1064 nm lines of lasers have been observed to be very broad peaks, whose absolute peak energy values are in good agreement with the ones obtained from photoluminescence measurements. On the other hand, Raman scattering spectrum with the 532 nm line has exhibited only vibrational modes. As a complementary tool of Raman scattering measurements with the excitation source of 532 nm, which shows weak vibrational transitions, attenuated total reflectance infrared spectroscopy has been also carried out. The results exhibited that the nature of the Raman scattering spectrum is strongly excitation energy-dependent, and with suitable excitation energy, electronic and/or vibrational transitions can be investigated.     

Proximate composition and fatty acid profile of three different fresh and dried commercial sea cucumbers from Turkey

Proximate composition and fatty acid (FA) profile of three commercial sea cucumbers; Holothuria tubulosa, Holothuria polii and Holothuria mammata caught from Aegean Sea of Turkey were analysed. The effects of regional variation and drying process on FA composition were also investigated. Moisture, protein, fat and ash contents of the species ranged between 81.24% and 85.24%, 7.88% and 8.82%, 0.09% and 0.18%, and 5.13% and 7.85%, respectively, with a significant changes among species (P < 0.05) with some exceptions. Although FA values varied significantly (P < 0.05) among species and regions, the changes for most FA types representing the same region for different species were not significantly different. Total polyunsaturated fatty acids (PUFA) were found to be higher than total saturated (SFA) and monosaturated FAs (MUFA) accounting for 53.0–62.12% for ∑PUFA, 13.28–16.41% for ∑MUFA and 13.99–19.21% for ∑SFA. While some individual SFAs and PUFAs decreased after drying process, various individual FAs of MUFA increased in their amounts (P < 0.05). Among PUFAs, the highest mean value of eicosapentaenoic acid and docosahexaenoic acid for all regions were determined for H. polii as 7.25% and H. tubulosa as 12.37% in fresh samples, respectively. This study represents new information relating to FA contents and drying effect on FA profile for these species.