Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratio

In this study, the monodisperse–macroporous particles produced by a relatively new polymerization protocol, the so‐called, “modified seeded polymerization,” were used as column‐packing material in the reversed phase chromatography (RPC) of proteins. The particles were synthesized in the form of styrene‐divinylbenzene copolymer approximately 7.5 μm in size. In the first stage of the synthesis, the monodisperse polystyrene particles 4.4 μm in size were obtained by dispersion polymerization and used as the “seed latex.” The seed particles were swollen by a low‐molecular‐weight organic agent and then by a monomer mixture. The monodisperse–macroporous particles were obtained by the polymerization of monomer mixture in the seed particles. In the proposed polymerization protocol, the number of successive swelling stages was reduced with respect to the present techniques by the use of sufficiently large particles with an appropriate average molecular weight as the seed latex. A series of particles with different porosity properties was obtained by varying the monomer/seed latex ratio. The separation behavior of HPLC columns including the produced particles as packing material was investigated in the RPC mode using a protein mixture including albumin, lysozyme, cytochrome c, and ribonuclease A. The chromatograms were obtained with different flow rates under an acetonitrile–water gradient. The theoretical plate number increased and chromatograms with higher resolutions were obtained with the particles produced by using a lower monomer/seed latex ratio. The separation ability of the column could be protected over a wide range of flow rates (i.e., 0.5–3 mL/min) with most of the materials tested. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 607–618, 2004     

Monodisperse‐porous poly(styrene‐co‐divinylbenzene) beads providing high column efficiency in reversed phase HPLC

A multistage polymerization protocol, the so‐called “modified seeded polymerization,” was developed for the production of monodisperse‐porous poly(styrene‐co‐divinylbenzene) providing high column efficiency as a packing material in reversed phase high performance liquid chromatography (RPLC). In the first stage of the multistage production, uniform polystyrene seed particles, produced by dispersion polymerization, were swollen by an organic agent (i.e., the diluent) and then by a monomer mixture containing styrene and divinylbenzene. The final porous particles were obtained in the monodisperse form by the polymerization of monomer mixture in the seed particles. By the use of a small size seed latex with low molecular weight and by the selection of the appropriate diluent, relatively small monodisperse‐porous particles with suitable pore structure could be achieved. In the reversed phase separation of alkylbenzenes, under isocratic conditions, theoretical plate numbers up to 40,000 plates/m were achieved by using 5.2 μm porous particles, obtained by a toluene‐dibutyl phthalate mixture as the diluent. No significant decrease in the resolution power was observed by the fourfold increase in the mobile phase flow rate. The column efficiency and the resolution observed with 5.2 μm monodisperse‐porous particles were significantly higher with respect to the currently available polymer based packing materials used in the reversed phase HPLC. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1430–1438, 2005     

Studying Fluid Characteristics Atop Surface Patterned Membranes via Particle Image Velocimetry

Surface patterning is a recent promising approach to promote performance of pressure-driven membranes in water treatment and desalination. Nevertheless, knowledge about foulant deposition mechanisms, especially at early stage of filtration, is still lacking. The applicability of particle imaging velocimetry to study fluid characteristics atop surface patterned thin-film composite membranes was investigated at different operating conditions. This work is an important first step toward reliable understanding of the impacts of topographical membrane surface modification on hydrodynamic conditions and foulant deposition mechanisms.     

Optimized Machine Learning Algorithms for Investigating the Relationship Between Economic Development and Human Capital

Computational Economics - In Economic Development, human capital was previously seen as production factors but gradually evolved into endogenous growth theories. Most of the previous studies have...     

Reusable water oxidation catalyst with dual active center for enhanced water oxidation: Iridium oxide nanoparticles immobilized on monodisperse-porous Mn5O8 microspheres

A reusable catalyst with dual active center for chemical water oxidation is synthesized for the first time by immobilization of iridium oxide nanoparticles (IrO₂ NPs) on monodisperse-porous manganese oxide microspheres acting both catalytic active center and support. Individual catalytic activity of manganese oxide microspheres is explained by multiple oxidation states of manganese which are capable of forming oxidative oxygen species. Monodisperse-porous microspheres in the form of Mn₅O₈, MnO₂ and Mn₂O₃ are used for synthesis of different catalysts and the highest activity in water oxidation is observed with the catalyst synthesized using Mn₅O₈ microspheres. The catalytic activity is correlated with the total Mn(II) and Mn(III) percentage of manganese oxide type selected for composite catalyst. The oxygen evolution up to 244 μmol is achieved in 30 min with the catalyst synthesized using Mn₅O₈ microspheres. Maximum TON and TOF numbers are obtained as 298 and 557 h^?1 with excellent reusability.     

Transferrin-Decorated Niosomes with Integrated InP/ZnS Quantum Dots and Magnetic Iron Oxide Nanoparticles: Dual Targeting and Imaging of Glioma

The development of multifunctional nanoscale systems that can mediate efficient tumor targeting, together with high cellular internalization, is crucial for the diagnosis of glioma. The combination of imaging agents into one platform provides dual imaging and allows further surface modification with targeting ligands for specific glioma detection. Herein, transferrin (Tf)-decorated niosomes with integrated magnetic iron oxide nanoparticles (MIONs) and quantum dots (QDs) were formulated (PEGNIO/QDs/MIONs/Tf) for efficient imaging of glioma, supported by magnetic and active targeting. Transmission electron microscopy confirmed the complete co-encapsulation of MIONs and QDs in the niosomes. Flow cytometry analysis demonstrated enhanced cellular uptake of the niosomal formulation by glioma cells. In vitro imaging studies showed that PEGNIO/QDs/MIONs/Tf produces an obvious negative-contrast enhancement effect on glioma cells by magnetic resonance imaging (MRI) and also improved fluorescence intensity under fluorescence microscopy. This novel platform represents the first niosome-based system which combines magnetic nanoparticles and QDs, and has application potential in dual-targeted imaging of glioma.     

Site-Directed Immobilization of an Engineered Bone Morphogenetic Protein 2 (BMP2) Variant to Collagen-Based Microspheres Induces Bone Formation In Vivo

For the treatment of large bone defects, the commonly used technique of autologous bone grafting presents several drawbacks and limitations. With the discovery of the bone-inducing capabilities of bone morphogenetic protein 2 (BMP2), several delivery techniques were developed and translated to clinical applications. Implantation of scaffolds containing adsorbed BMP2 showed promising results. However, off-label use of this protein-scaffold combination caused severe complications due to an uncontrolled release of the growth factor, which has to be applied in supraphysiological doses in order to induce bone formation. Here, we propose an alternative strategy that focuses on the covalent immobilization of an engineered BMP2 variant to biocompatible scaffolds. The new BMP2 variant harbors an artificial amino acid with a specific functional group, allowing a site-directed covalent scaffold functionalization. The introduced artificial amino acid does not alter BMP2′s bioactivity in vitro. When applied in vivo, the covalently coupled BMP2 variant induces the formation of bone tissue characterized by a structurally different morphology compared to that induced by the same scaffold containing ab-/adsorbed wild-type BMP2. Our results clearly show that this innovative technique comprises translational potential for the development of novel osteoinductive materials, improving safety for patients and reducing costs.     

Untersuchungen zum Transfer pharmakologisch wirksamer Substanzen aus der Nutztierhaltung in Porree und Weißkohl

Investigation on the transfer of pharmacologically active substances used in animal husbandry into leek and cabbage. The potential of leek and cabbage for uptake of highly prescribed veterinary drugs (antibiotics) was tested in hydroponically grown plants. For this purpose the antibiotics sulfadiazine (SFD), enrofloxacine (ENR), tetracycline (TC), chlortetracycline (CTC) and monensine (MON) were chosen. A further aim was to gain data on the situation of vegetables grown in agricultural practise with regard to antibiotic residues. The evident effects of the antibiotics on plants grown hydroponically (each antibiotic was administered at 5 μmol/l nutrient solution) were greatly different: With regard to leek there were no visible effects (MON, SFD), a weak bleaching of the younger leaf sections (CTC), and strong effects of ENR. The (phytotoxic) effects of antibiotics on cabbage were much more distinct. CTC caused a yellowing of the plant vasculature in cabbage. MON induced lesions on some leaves and finally led to leaf wilting. With administration of ENR a nearly complete bleaching of young leaves was observed. Using LC-MS/MS-methods (low-resolution and high-resolution MS) the administered antibiotics, as well as conversion products and metabolites, were separately identified and quantified in various organs of leek (roots, young and old sections of leaves) and cabbage (roots, stalks, young and old leaves). Depending on the type of antibiotic, vegetable species, and plant organ, the detected concentrations of antibiotic residues comprised several orders of magnitude ranging from μg/kg to mg/kg of fresh weight (fw). The highest concentrations of antibiotics were found in roots of both vegetable species: CTC and TC were detected at approximately 10 mg/kg fw in cabbage roots and at approximately 20 mg/kg fw in leek roots and ENR was determined at approximately 12 mg/kg fw in cabbage roots. Low amounts of ENR were metabolised to ciprofloxacine (CIP). ENR occurred at similar concentrations of approximately 7 mg/kg fw in roots and old leaves of cabbage, indicating a high transport rate of this antibiotic in the cabbage plant. In stalks, young and old leaves of cabbage and in young and old leaf sections of leek all administered antibiotics were detected. Within these antibiotics, ENR and CTC and their conversion products, e. g. demeclocycline (DMC) and TC, occurred at the highest concentrations. SFD and MON were found in considerably lower concentrations (<100 μg/kg fw). The results of our experiments in hydroponic cultures, using defined concentrations of antibiotics in the nutrient solution, evidently demonstrate that cabbage and leek have a very high potential for uptake of a number of veterinary antibiotic drugs, especially for tetracycline and ENR.