Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride

Thermally conductive polymers offer new possibilities for the heat dissipation in electric and electronic components, for example, by a three‐dimensional shaping of the heat sinks. To face safety regulations, improved fire performance of those components is required. In contrast to unfilled polymers, those materials exhibit an entirely different thermal behavior. To investigate the flammability, a phosphorus flame retardant was incorporated into thermally conductive composites of polyamide 6 and hexagonal boron nitride. The flame retardant decreased the thermal conductivity only slightly. However, the burning behavior changed significantly, due to a different heat propagation, which was investigated using a thermographic camera. An optimum content of hexagonal boron nitride for a sufficient thermal conductivity and fire performance was found between 20 and 30 vol%. The improvement of the fire performance was due to a faster heat release out of the pyrolysis zone and an earlier decomposition of the flame retardant. For higher contents of hexagonal boron nitride, the heat was spread faster within the part, promoting an earlier ignition and increasing the decomposition rate of the flame retardant.     

Light-induced electron spin polarization in the ground state of water-soluble copper porphyrins

Light-induced spin-polarized transient EPR spectra are reported for several water-soluble copper porphyrins. The spectra are assigned to the doublet ground state, with emissive spin polarization resulting from photoexcitation and subsequent electronic relaxation. In contrast to other systems for which polarization of a doublet ground state has been observed, the exchange interactions in the copper porphyrins are strong and the geometry is fixed. It is proposed that intersystem crossing from the photoexcited trip-doublet to the trip-quartet state can lead to net polarization of the spin system and that this polarization is maintained during electronic decay, possibly via charge-transfer and exciplex states. The intensity of the observed spin polarization is essentially independent of the molecular orientation in the external field, but is strongly dependent on the nature of the charged peripheral groups. Possible reasons for this behavior are discussed.     

Zur Fließfähigkeit von Schüttgütern – Definition und Meßverfahren

Flowability of Bulk Solids – Definition and Measuring Principles . The flowability of bulk solids has to be known for many practical applications. The present paper describes how the flowability is defined and on which physical properties it depends. Experimental determination of the flowability using a shear test is demonstrated. Conditions influencing measuremed results are described. Finally an overview of various methods used for characterization of the flowability of bulk solids is given.     

Vital-Fluorochromization of Microorganisms Using 3′,6′-Diacetylfluorescein to Determine Damages of Cell Membranes and Loss of Metabolic Activity by Ozonation

Cell suspensions of Escherichia coli as a model for bacterial populations in wastewaters were treated with ozone as a disinfectant in a continuously operated pilot plant with a plug flow reactor. Suspensions with an initial number of CFU (colony forming units) of 10⁸ mL^?1 were ozonized with ozone concentrations up to 12 mg/L. Metabolic activities and membrane functions break down with increasing ozone concentrations. The fluorochromization using 3′,6′-diacetylfluorescein (FDA) proved to be a suitable method for the detection of an alteration in permeability of the cell membranes and an inactivation of metabolic activity. By fluorescence microscopic and photometric investigations it could be clearly demonstrated that, in the case of disinfection with ozone, inactivation of the cells includes first of all a damage of the cell membranes. In contrast to the determination of the number of CFU, fluorochromization allows the detection of alteration in metabolic activities.     

Uncertainty Matters: Computer Models at the Science–Policy Interface

The use of computer models offers a general and flexible framework that can help to deal with some of the complexities and difficulties associated with the development of water management plans as prescribed by the Water Framework Directive. However, despite the advantages modelling presents, the integration of information derived from models into policy is far away from being trivial or the norm. Part of the difficulties of this integration is rooted in the lack of confidence policy makers have on the incorporation of modelling information into policy formulation. In this paper we examine the reasons for this apparent lack of confidence and explore how some tools, presently in use, address this problem. We conclude that public confidence in models is highly dependent on the way uncertainties are addressed and suggest possible directions of action to improve the current situation. Four real case studies illustrate how computer models have been used in The Netherlands for carrying out management plans at regional and national scale. We suggest that the solution to integrate modelling information into policy formulation lies on both the modelling and the policy-making communities.     

Relative importance of evaluation criteria for enterprise systems: a conjoint study

Abstract.  While a large body of research exists on the development and implementation of software, organizations are increasingly acquiring enterprise software packages [e.g. enterprise resource planning (ERP) systems] instead of custom developing their own software applications. To be competitive in the marketplace, software package development firms must manage the three-pronged trade-off between cost, quality and functionality. Surprisingly, prior research has made little attempt to investigate the characteristics of packaged software that influence management information system (MIS) managers' likelihood of recommending purchase. As a result, both the criteria by which MIS managers evaluate prospective packaged systems and the attributes that lead to commercially competitive ERP software products are poorly understood. This paper examines this understudied issue through a conjoint study. We focus on ERP systems, which are among the largest and most complex packaged systems that are purchased by organizations. In a conjoint study, 1008 evaluation decisions based on hypothetical ERP software package profiles were completed by managers in 126 organizations. The study represents the first empirical investigation of the relative importance that managers ascribe to various factors that are believed to be important in evaluating packaged software. The results provide important insights for both organizations that acquire such systems and those that develop them. The results show that functionality, reliability, cost, ease of use and ease of customization are judged to be important criteria, while ease of implementation and vendor reputation were not found to be significant. Functionality and reliability were found to be the most heavily weighted factors. We conclude the paper with a detailed discussion of the results and their implications for software acquisition and development practice.     

Machining of reproducible flaws corresponding to fatigue cracks for fracture mechanics tests of components and welded joints

In connection with the analysis and the development of failure concepts in fracture mechanics for quasistatic loaded components and elastic-plastic behaviour of the material, tests are also carried out with welded and/or complex shaped specimens or structures. Thereby the difficulty arises of generating reproducible flaws in the form of fatigue precracks in definite positions in the components, respectively in the welded joint. It is reported exemplarily about experiments on different CT25 and CCT specimens and on a pressure vessel which contained a fatigue pre-crack, a 0.2 mm saw cut or notches with notch root radius ≤ ≥ 0.1 mm as flaws. The comparison of the results with regard to J-integral at initiation of stable crack, J_i, and J_R curves shows that under certain conditions the 0.2 mm saw cut (notch root radius ≤ ≤ 0.02 mm) is a useful alternative, if reproducible generation of a fatigue pre-crack will not be successful or too expensive. The tests were carried out on StE 460 and on a welded joint of this steel at 25 ± 2°C.