Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

Effect of water pretreatment on CO<Subscript>2</Subscript> capture using a potassium-based solid sorbent in a bubbling fluidized bed reactor

A bubbling fluidized bed reactor was used to study CO₂ capture from flue gas by using a potassium-based solid sorbent, sorbKX35 which was manufactured by the Korea Electric Power Research Institute. A dry sorbent, sorbKX35, consists of K₂CO₃ for absorption and supporters for mechanical strength. To increase initial CO₂ removal, some amount of H₂O was absorbed in the sorbent before injecting simulated flue gas. It was possible to achieve 100% CO₂ removal for more than 10 minutes at 60°C and a residence time of 2 s with H₂O pretreatment. When H₂O pretreatment time was long enough to convert K₂CO₃ of sorbKX35 into K₂CO₃ · 1.5H₂O, CO₂ removal was excellent. The results obtained in this study can be used as basic data for designing and operating a large scale CO₂ capture process with two fluidized bed reactors. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Methodology for Designing a Laser-Based Additive Process for the Formation of a Lattice Periodic Structure on the Surface of an Aluminum Alloy Plate

Automation and Remote Control - The paper presents the results of studying the “directed energy deposition” additive technological process aimed at improving the mechanical properties...     

Exploiting information extraction techniques for automatic semantic video indexing with an application to Turkish news videos

This paper targets at the problem of automatic semantic indexing of news videos by presenting a video annotation and retrieval system which is able to perform automatic semantic annotation of news video archives and provide access to the archives via these annotations. The presented system relies on the video texts as the information source and exploits several information extraction techniques on these texts to arrive at representative semantic information regarding the underlying videos. These techniques include named entity recognition, person entity extraction, coreference resolution, and semantic event extraction. Apart from the information extraction components, the proposed system also encompasses modules for news story segmentation, text extraction, and video retrieval along with a news video database to make it a full-fledged system to be employed in practical settings. The proposed system is a generic one employing a wide range of techniques to automate the semantic video indexing process and to bridge the semantic gap between what can be automatically extracted from videos and what people perceive as the video semantics. Based on the proposed system, a novel automatic semantic annotation and retrieval system is built for Turkish and evaluated on a broadcast news video collection, providing evidence for its feasibility and convenience for news videos with a satisfactory overall performance.     

Biosorption of Acid Red P-2BX by lichens as low-cost biosorbents

The aim of this study is to examine the dye biosorption properties of lichen species called Cladonia convoluta and Evernia prunastri. Since lichens are extensively found in the environment, their suitability as a cheap adsorbent has been investigated in this study. The optimal parameters for textile dye biosorption were also determined. The dried lichen biomass showed better dye biosorption capacity than ash lichen biomass. C. convoluta had better dye biosorption capacity than E. prunastri. Dye biosorption rate was found as 71.41% at optimal conditions. This study concluded that C. convoluta was a successful and cheap biosorbent for treatment of water contaminated by Acid Red P-2BX dye.     

Migration of an incommensurate high-angle grain boundary

A model is proposed for the migration of a high-angle grain boundary; it is based on the consideration of local atomic configurations and their restructuring. Various competing restructuring mechanisms are discussed. The boundary migration velocity is shown to depend nonlinearly on the thermodynamic driving force at a low value of this force. The shape of this dependence is determined by the driving force and a boundary structure.     

Effect of preparation conditions on nanostructural features of the NAFION® type perfluorinated proton conducting membranes

Features of the fine structure of three samples of perfluorinated Nafion® type membranes—Nafion-115, its Russian analogue MF-4SK, and a new similar material PFM-E produced according to our novel water-emulsion technique—have been characterized using the small-angle neutron scattering technique. A difference in the regularity of common elements of fine structure (cylindrical channels) in the membranes has been revealed. Nafion-115 has the most regular structure with a diffraction peak corresponding to the double channel diameter and an additional broad maximum in the scattering curve indicating a long-range order in the arrangement of straight cylindrical channels. For MF-4SK, in addition, twisted and less ordered channels have been observed. In the PFM-E sample channels have a tortuous and branched structure with diameters similar to Nafion-115. Only a short-range order (40–50 Å) in the arrangement of the channels has been detected, and correlation in their mutual orientation at longer distances is weakened. It has been supposed that the observed branched structure of the channels promotes an increase in water content and an improvement in proton conductivity.     

Polymer composite materials: Technologies and applications

The physicomechanical properties of polymer composites based on aramide fibers that are obtained by the wet-spinning technique with the use of epoxy binders are discussed. The chemical structures of reinforcing fibers and components of epoxy binders; the microstructures, surface structures, and some properties of aramide fibers; and the processes of manufacturing high-strength reinforced composites on their basis are described. Some product samples made of these composites are presented. The investigated reinforcing materials possess high tensile strengths and tensile moduli, which make it possible to obtain products with a high level of operational characteristics on their basis.     

Investigating the effect of production process of ball mill refiner on some physical quality parameters of compound chocolate: response surface methodology approach

Chocolate compound was produced using ball mill refiner, and the effect of agitator shaft speed and refining time on the physical quality parameters (particle size, colour and steady‐state rheology) of compound chocolate was determined using response surface methodology. The shaft speed and refining time range were selected between 40–60 r.p.m. and 10–30 min, respectively. Determination coefficient of the models established for particle size, Newtonian viscosity and colour parameters (brightness, chroma and hue angle) were found to be very close to unity. Increasing shaft speed and time induced a reduction in particle size and an increase in viscosity of the samples. Temperature sweep test was also performed, and the obtained data were successfully fitted to Arrhenius equation to calculate the corresponding parameters representing temperature dependency of the compounds. The results highlighted that the establishment of such models can provide essential information in terms of optimisation of production processes regarding usage purpose of the compound chocolate.