Distributed ledger technology in supply chains: a transaction cost perspective

With the emergence of distributed ledger technology (DLT), numerous practitioners and researchers have proclaimed its beneficial impact on supply chain transactions in the future. However, the vast majority of DLT initiatives are discontinued after a short period. With the full potential of DLT laying far down the road, especially managers in supply chain management (SCM) seek for short-term cost-saving effects of DLT in order to achieve long-term benefits of DLT in the future. However, the extant research has bypassed grounding long-term as well as short-term effects of DLT on supply chain transaction with empirical data. We address this shortcoming, following an abductive research approach and combining empirical data from a multiple case study design with the corresponding literature. Our study reveals that the effects of DLT on supply chain transactions are two-sided. We found six effects of DLT solutions that have a cost-reducing or cost avoidance impact on supply chain transactions. In addition, we found two effects that change the power distribution between buyers and suppliers in transactions and a single effect that reduces the dependency of supply chain transactions on third parties. While cost-reducing and avoidance as well as dependency-reducing effects are positive effects, the change in power distribution might come with disadvantages. With these findings, the paper provides the first empirical evidence of the impact of DLT on supply chain transactions, which will enable managers to improve their assessment of DLT usage in supply chains.     

A stiffness parameter and truncation error criterion for adaptive path following in structural mechanics

We explore a truncation error criterion to steer adaptive step length refinement and coarsening in incremental-iterative path following procedures, applied to problems in large-deformation structural mechanics. Elaborating on ideas proposed by Bergan and collaborators in the 1970s, we first describe an easily computable scalar stiffness parameter whose sign and rate of change provide reliable information on the local behavior and complexity of the equilibrium path. We then derive a simple scaling law that adaptively adjusts the length of the next step based on the rate of change of the stiffness parameter at previous points on the path. We show that this scaling is equivalent to keeping a local truncation error constant in each step. We demonstrate with numerical examples that our adaptive method follows a path with a significantly reduced number of points compared to an analysis with uniform step length of the same fidelity level. A comparison with Abaqus illustrates that the truncation error criterion effectively concentrates points around the smallest-scale features of the path, which is generally not possible with automatic incrementation solely based on local convergence properties.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

Efficient allylation of cellulose in dimethyl sulfoxide/tetrabutylammonium fluoride trihydrate

The cellulose solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF) was successfully applied as reaction medium for the synthesis of allyl cellulose by conversion of the polymer with allyl chloride in the presence of solid NaOH. Samples with degree of substitution from 0.50 to 2.98 were accessible by varying the molar ratio anhydroglucose unit:allyl chloride:NaOH and reaction time. DMSO/TBAF was found to be an efficient reaction medium for the preparation of highly functionalized samples from spruce sulfite pulp with degree of polymerization of about 500 even in a scale of 50 g. The allyl cellulose samples were characterized by means of FTIR- and NMR spectroscopy. Size exclusion chromatography revealed negligible polymer degradation during synthesis and purification of the samples.     

Primary hyperoxaluria

Cystic fibrosis (CF) is the most common lethal autosomal recessive disorder among Caucasians and is caused by abnormalities in the cystic fibrosis transmembrane conductance regulator gene (CFTR). CFTR gene encodes a chloride channel that regulates secretion in many exocrine tissues especially pancreatic and pulmonary tissues. The clinical presentation of cystic fibrosis is highly variable with isolated CAVD (congenital absence of vas deferens) and/or typical pancreatic and pulmonary manifestations. Over 500 mutations in the CFTR gene have been described and vary among different geographic locations. The severity of clinical manifestations and specially the pulmonary disease is poorly correlated with genotype. It is interesting to collect clinical and genetical data by analysing a larger cohort of CF patients. These results are likely to improve our understanding of the physiopathology of CF and the genetic counselling; particular biochemical defect could lead to more specific treatments in the future. From our 110 patients selected in Champagne-Ardenne country, we analysed the entire coding sequence of CFTR gene and detected 95% of CF mutations and in fact, 89.5% if we include the CAVD patients; 59.4% of CF mutations were detected for these patients. Three new mutations have been here reported. We found numerous CF mutations with a large distribution throughout the gene. Nevertheless, three exons are mainly involved: 10, 11 and 21. Relationships between the genotype and phenotype are difficult to assess.     

Manipulating Deformable Linear Objects: Fuzzy-Based Active Vibration Damping Skill

Human can handle a deformable object and damp its vibration with recognized skill. However, for an industrial robot, handling a deformable object with acute vibration is often a difficult task. This paper addresses the problem of active damping skill for handling deformable linear objects (DLOs) by using a strategy inspired from human manipulation skills. The strategy is illustrated by several rules, which are explained by a fuzzy and a P controller. A proportional-integral-derivative (PID) controller is also employed to explain the rules as a comparison. The interpretations from controllers are translated into high level commands in a robotic language V+. A standard industrial robot with a force/torque sensor mounted on the wrist was employed to demonstrate the skill. Experimental results showed the fuzzy based damping skill is quite effective and stable even without any previous acknowledge of the deformable linear objects.Category (5)     

Fast algorithms for computing the diameter of a finite planar set

Three algorithms for computing the diameter of a finite planar set are proposed. Although all three algorithms have (O(n ²) worst-case running time, an expected-complexity analysis shows that, under reasonable probabilistic assumptions, all three algorithms have linear expected running time. Experimental results indicate that two of these algorithms perform very well for some distributions, and are competitive with an existing method. Finally, we exhibit situations where these exact algorithms out-perform a published approximate algorithm.Research of the first author was supported by grant NSERC A 2422. Research of the second author was supported by grants NSERC A 9293, FCAC EQ-1678 and a Killam Senior Research Fellowship awarded by the Canada Council     

Whisker-contacted diode-multipliers as quasioptical SMMW-arrays

Starting from a SMMW-multiplier design with quasioptical output two different multiplier compounds are presented. These new multipliers consist of a quasioptical antenna array in the output circuit which acts as a tunable power combiner. The multipliers work as quadruplers with an output frequency of 600 GHz. In all constructions the pump energy is fed into the diodes by a screened waveguide network. Optimum configurations for all arrays concerning quasioptical power combining are calculated and a theoretical comparison between the different multiplying conceptions is made. Finally some characteristic measurements of the quasioptical quadruplers are illustrated.     

Relative neighborhood graphs and their relatives

Results of neighborhood graphs are surveyed. Properties, bounds on the size, algorithms, and variants of the neighborhood graphs are discussed. Numerous applications including computational morphology, spatial analysis, pattern classification, and databases for computer vision are described