A review of the effects of water transfers in the La Grande Hydroelectric Complex (Québec,Canada)

Construction of the La Grande Complex in Eastern Canada called for complete or partial diversion of six rivers, the mean annual discharge of which varied from 60 to 1600 m³ s^?1, and the transfer of water from two adjoining watersheds (1586m³ s^?1) into La Grande Rivière. Three of these rivers with reduced flow, Eastmain (from 700 to 95m³ s^?1), Opinaca (from 260 to 35m³ s^?1), and Caniapiscau (from 1708 to 960m³ s^?1) and the waterways with increased flows, Boyd-Sakami (from 1 to 811m³ s^?1) and La Grande Rivière (from 1760 to 3400m³ s^?1) were intensively monitored from 1978 to 1988, while the others were surveyed sporadically. Very few modifications were observed, compared to previous conditions, in banks stability, water quality, and aquatic fauna of the affected rivers: those which appeared can be explained by the water level fluctuations, the water quality of the tributaries of the residual drainage basin, and/or by the direct influence of the reservoirs. In James Bay, the areal extent of the Eastmain River and La Grand Rivière plumes varied with discharge in an exponential relation, mostly under ice cover; resources from the coastal environment had not yet undergone any major changes. Because of the very small population dwelling in the area, less than 3000 inhabitants, modifications in the hydrological regime of these rivers did cause relatively few impacts, the main being greater banks instability in specific locations, reduction of the thickness and ice cover on La Grande Rivière, enhancement of navigation constraints on Eastmain River, and higher mercury levels in fish related to operation of the reservoirs.     

Hepatic Δ9 and Δ6 desaturase activities during the recovery period following carbon tetrachloride poisoningdesaturase activities during the recovery period following carbon tetrachloride poisoning

The liver microsomal Δ⁹ and Δ⁶ desaturase activities have been studied in rats with carbon tetrachloride-induced hepatitis. Immediately after poisoning, significant decreases were observed for both types of desaturase activity. However, recovery kinetics were slower for the Δ⁶ desaturase than for the Δ⁹ desaturase. The activities of NADH-ferricyanide and NADH-cytochrome C reductases, proteins involved in the electron transfers associated with microsomal desaturation, were also measured. There was a fall in both activities after poisoning, but this decrease was less than that of the desaturase activities.     

Immunoregulatory functions of paf-acether. VI. Dual effect on human B cell proliferation

The role of paf-acether (paf), a phospholipid cytokine, in the modulation of human B cell function was investigated. Paf, from 1×10⁻⁵ M to 10⁻⁶ M, decreased B cell proliferation induced by both phorbol myristate acetate (PMA) and anti-IgM antibodies (anti-IgM Ab). By contrast, 1×10⁻⁷ M to 1×10⁻⁹ M paf enhanced PMA triggered, but not anti-IgM triggered B cell proliferation. B cell proliferation was modulated between 24 and 72 hr of culture indicating that the effect of paf did not merely reflect a shift in proliferation kinetics. Interestingly, paf also enhanced the spontaneous proliferation of a Burkitt lymphoma-derived B cell line, Raji, which suggests that paf can directly act on B cells. The modulatory effect of paf on peripheral blood B cells was independent of PMA concentration, yet the effect on Raji cells was dependent upon cell density. The data suggest that paf is a potent modulator of B cell function, and may be involved in the control of humoral immune response. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Determination of the repartition of monomers between sol and gel fractions in copolycondensate glycerol/azelaic acid by radioassay

The distribution of the monomers between sol and gel fractions, theoretically forecasted from network formation theory, is experimentally determined in glycerol/azelaic acid system with tritium labeled glycerol by radioassay.Presented at the 7th Discussion Conference IUPAC Polymer Networks, Karlovy Vary, CSSR, September 15–19, 1980     

Interest of molecular functionalization for electrochemical storage

Despite great interests in electrochemical energy storage systems for numerous applications, considerable challenges remain to be overcome. Among the various approaches to improving the stability, safety, performance, and cost of these systems, molecular functionalization has recently been proved an attractive method that allows the tuning of material surface reactivity while retaining the properties of the bulk material. For this purpose, the reduction of aryldiazonium salt, which is a versatile method, is considered suitable; it forms robust covalent bonds with the material surface, however, with the formation of multilayer structures and sp³ defects (for carbon substrate) that can be detrimental to the electronic conductivity. Alternatively, non-covalent molecular functionalization based on π–π interactions using aromatic ring units has been proposed. In this review, the various advances in molecular functionalization concerning the current limitations in lithium-ion batteries and electrochemical capacitors are discussed. According to the targeted applications and required properties, both covalent and non-covalent functionalization methods have proved to be very efficient and versatile. Fundamental aspects to achieve a better understanding of the functionalization reactions as well as molecular layer properties and their effects on the electrochemical performance are also discussed. Finally, perspectives are proposed for future implementation of molecular functionalization in the field of electrochemical storage.

Open image in new window

     

A framework for virtual organization requirements

Virtual organizations (VOs) are formed by an alliance of organizations linked by a partnership for dealing with emerging challenges. Information and communication technologies play a fundamental role facilitating cooperation, communication and collaboration among the VO members. The formal identification and representation of Requirements Engineering (RE) for one organization have been researched to a large extent along with several elicitation techniques. However, these techniques are not adequate for covering the major challenges of RE for VO. We explore the work done in the management and RE fields to propose a model-based framework for eliciting VOs’ requirements. The goal is to analyze the VO from two points of view: border (intra-organizational, inter-organizational and extra-organizational) and abstract (intentional, organizational and operational). This article includes the framework validation with a case study and a transformation process to develop partial Business Process Diagram from the intentional models.     

Photocatalytic degradation of a phenylurea, chlortoluron, in water using an industrial titanium dioxide coated media

The degradation of an herbicide, chlortoluron, by UV/TiO₂ photocatalysis in water using industrial titanium dioxide coated non-woven paper was studied. The influence of parameters such as adsorption capacity, initial concentration and TiO₂ implementation (coated or in suspension) was investigated. The results emphasize the importance of operational conditions and reactor geometry on the kinetic degradation rate. The analysis of the first organic by-products suggests that a hydroxyl radical attack occurs on the phenyl ring and methyl groups of the chlortoluron before the opening of the aromatic ring. The fate of hetero-atoms has been investigated. The fates of the two nitrogen atoms in the molecule are different, not only did it depend on their initial oxidation degree, as both had the same oxidation degree, but also on the initial oxidation state of neighboring carbons. The chlorine atoms were completely released as chloride ions. The study of the influence of the oxygen concentration showed the importance of the oxygen mass transfer when designing an industrial photocatalytic reactor. An original calculation process was carried out to evaluate the adsorption constant of oxygen over the whole photocatalysis period and not only in the initial conditions as previously provided. This work points out the necessity of extending the understanding of the efficiency of chlortoluron removal or of the removal of various complex pesticide mixtures found in agricultural wastewater, using alternative, more industrially realistic, reactors.     

Simulation of the urban climate variations in connection with the transformations of the city of Nantes since the 17th century

The paper seeks to quantify the effect of urban politics on the microclimate of the city of Nantes (France), in particular those initiated by the sanitarians in the mid-19th century to find a remedy for the insalubrity that had been developing with urban densification since the late 17th century. Intensive historical research was first carried out in order to define and date the major transformations undergone by the city, its structure (densification, then widening of the streets, filling of water courses), the lifestyle habits (heating) or the building practices (appearance of stone and paving, higher buildings, insulation). This led to the definition of 5 characteristic states of the city, in 1680, 1756, 1835, 1880 and 1945.     

Run-to-run control of blood glucose concentrations for people with Type 1 diabetes mellitus

Run-to-run control has been applied to several traditional batch processes in the chemical industry. The 24-h cycle of eating meals, measuring blood glucose concentrations, and delivering the correct insulin bolus, with the goal of achieving the optimal blood glucose profile, can be viewed in the same spirit as traditional batch processes such as emulsion polymerization. In this paper, we aim to exploit the "repetitive" nature of the insulin therapy of people with Type 1 diabetes. A run-to-run algorithm is used on a virtual diabetic patient model to control blood glucose concentrations. The insulin input is parameterized into the timing and amount of the dose while the glucose output is parameterized into the maximum and minimum glucose concentrations. Robustness of the algorithm to variations in the meal amount, meal timing, and insulin sensitivity parameter is addressed. In general, the algorithm is able to converge when the meal timing is varied within +/- 40 min. If the meal size is underestimated by approximately 10 grams (g), the algorithm is able to converge within a reasonable time frame for breakfast, lunch, and dinner. If the meal size is overestimated by 20-25 g, the algorithm is able to converge. When random variations in the meal timing and the meal amount are introduced, the variation on the output variables, Gmax and Gmin, scales according to the amount of variation allowed. Along with this, the insulin sensitivity of the virtual patient model is varied. The algorithm is robust for differences in insulin sensitivity less than +/- 50% of the nominal value.