Effect of Annealing on the Surface Microstructure of Y-Ba-Cu-O Superconducting Ceramics

Precusors to the YBa₂Cu₃O_7-δ material were prepared by both the oxalate precipitation method and conventional ceramic processing. Second-phase grains were observed to develop on the exposed fracture surface during annealing at 500° to 600°C in an ambient atmosphere. The second-phase grains were identified to be BaCO₃ using EDX and XRD. The liquid phase, which was formed because of local chemical inhomogeneity in the Y-Ba-Cu-O system, contributed to the formation of second-phase grains as a source of Ba.     

Surface properties of wood and MDF after ultrasonic-assisted cutting

Surfaces created by ultrasonic-assisted cutting (UC) of beech and spruce and of medium density fibreboard (MDF) are compared to surfaces obtained by conventional linear cutting (CC) using a sharp tool. Topography is evaluated performing roughness measurements and scanning electron microscopy. No effect of UC procedure on mean roughness is found. The surface of MDF and large areas of the surfaces of the woods appear similar after UC and CC, whereas other regions show impact marks and microscopic reels produced by the periodic oscillation of the tool in UC. The wettability of surfaces produced with both wood processing techniques is similar. Surface free energy measurements indicate accelerated ageing caused by UC, probably due to heating.     

Molecular Subtyping of Invasive Breast Cancer Using a PAM50-Based Multigene Expression Test-Comparison with Molecular-Like Subtyping by Tumor Grade/Immunohistochemistry and Influence on Oncologist’s Decision on Systemic Therapy in a Real-World Setting

In intermediate risk hormone receptor (HR) positive, HER2 negative breast cancer (BC), the decision regarding adjuvant chemotherapy might be facilitated by multigene expression tests. In all, 142 intermediate risk BCs were investigated using the PAM50-based multigene expression test Prosigna® in a prospective multicentric study. In 119/142 cases, Prosigna® molecular subtyping was compared with local and two central (C1 and C6) molecular-like subtypes relying on both immunohistochemistry (IHC; HRs, HER2, Ki-67) and IHC + tumor grade (IHC+G) subtyping. According to local IHC, 35.4% were Luminal A-like and 64.6% Luminal B-like subtypes (local IHC+G subtype: 31.9% Luminal A-like; 68.1% Luminal B-like). In contrast to local and C1 subtyping, C6 classified >2/3 of cases as Luminal A-like. Pairwise agreement between Prosigna® subtyping and molecular-like subtypes was fair to moderate depending on molecular-like subtyping method and center. The best agreement was observed between Prosigna® (53.8% Luminal A; 44.5% Luminal B) and C1 surrogate subtyping (Cohen’s kappa = 0.455). Adjuvant chemotherapy was suggested to 44.2% and 88.6% of Prosigna® Luminal A and Luminal B cases, respectively. Out of all Luminal A-like cases (locally IHC/IHC+G subtyping), adjuvant chemotherapy was recommended if Prosigna® testing classified as Prosigna® Luminal A at high / intermediate risk or upgraded to Prosigna® Luminal B.     

Wedge splitting experiments on three-layered particleboard and consequences for cutting

Three layered particleboard is a widely used and important plate material used for construction and furniture production. This implies that material parameters such as strength and elasticity in bending are determined. However, usually little or nothing is known about the fracture properties. This paper has the goal to investigate the material fracture properties in the three layers and discuss the linear and non-linear fracture mechanical properties with regard to board production and its consequences for cutting. It could be shown that the fracture properties of the solid boards are dominated by the bigger chips in the core of the plate and the fracture properties of boards are best characterized by the specific fracture energy. The linear elastic- and the non-linear elastic fracture mechanics approach of the outer layers shows essentially similar results, represented by brittle fracture. For the prediction of the cutting performance, linear elastic fracture mechanics parameters are considered to be more appropriate because these parameters describe the limit of linear elastic behaviour and therefore the case of smallest deformation zone. High stress concentration at the tool tip and low permanent deformation in the bulk material give the best cutting quality.     

Characterization of surface roughness anisotropy on mismatched InAIAs/lnP heterostructures

We have studied surface roughness on mismatched In_0.65Al_0.35As epilayers of various thicknesses on (001) InP. The sample set spans the entire range from coherently strained to completely relaxed epilayers. As characterization tools, we have used atomic force microscopy (AFM), laser light scattering (LLS), and variable azimuthal angle ellipsometry (VAAE). AFM reveals that the surfaces are covered by densely packed ellipsoidal islands elongated along the [1-10] direction. The island size increases with layer thickness. Island anisotropy and the root mean square of the surface roughness increase with increasing thickness but decrease upon full lattice relaxation. LLS intensity displays a prominent azimuthal dependence that correlates well with the two-dimensional power spectrum of the surface topography, as predicted by theory. VAAE reveals a sinusoidal dependence of the ellipsometric parameter Δ on azimuthal angle. The amplitude of A correlates well with the short wavelength anisotropy of the surface power spectrum. Our work suggests that LLS and VAAE are fast, nondestructive, sensitive techniques for characterization of surface roughness in mismatched III-V heterostructures.     

Temporal changes in the periphytic algal communities in a drowned tropical forest reservoir in Malaysia: Lake Kenyir

Periphytic algal assemblages, comprising bacillariophytes, cyanophytes and chlorophytes of standing dead trees in Lake Kenyir, a tropical drowned forest reservoir, were studied during 1995. A total of 317 algal taxa were identified in this study. The monthly floral mean species richness and cell count data demonstrated significant temporal differences between the months, in one-way anova (P < 0.05). Both redundancy analysis and cluster analysis on monthly blue-green abundance and diatom assemblages exhibited conspicuous groupings among the months, with underpinning seasonal differences. The responses were not similar, however, between the upstream and downstream ends of the lake. The grouping or clustering of months can be generalized as: (i) November, December and January as the monsoonal months; (ii) February, March, April and May as the transitional months; and (iii) June to October as the dry months. Based on stepwise multiple regression with forward selection, alkalinity and dissolved oxygen concentration were significant environmental predictors at the downstream dam sampling site, and reactive silica, electrical conductivity, Secchi depth transparency and sunshine hours were significant predicators at the upstream riverine sampling site, based on Monte Carlo tests. Being a ploymictic, mesotrophic lake, the limnology and temporal changes for Lake Kenyir appears to be complex and driven by monsoons, as evidenced from the temporal changes in its periphytic algae communities, particularly the diatom assemblages. The downstream sampling site (site 1) at the dam, in the main basin and deeper zone of the lake, the seasonal amplitude was likely complex because of thermocline formation and stratification processes. In contrast, the upstream sampling site in the Petang River (site 2) exhibited a clearer distinction between the dry and monsoon months, based on its cyanophyte and diatom floral assemblages. These study results are pertinent for lake management, especially for developing biomonitoring programmes or lake productivity studies, as well as for climate change studies, within the context of tropical lake ecology.     

Functional and morphologic changes after combined maxillary intrusion and mandibular advancement surgery

PURPOSE: The purposes of this investigation were 1) to compare the morphology and function of patients with combined vertical maxillary excess (VME) and mandibular retrognathia with that of controls, and 2) to examine how these parameters change after combined maxillary intrusion and mandibular advancement surgery. PATIENTS AND METHODS: Fifteen female VME/retrognathic patients were compared with 26 female controls before and for up to 3 years after orthognathic surgery. Facial skeletal morphology, mandibular range of motion, maximum isometric bite force, and levels of electromyographic activity (EMG) in selected muscles of mastication were measured on all subjects. Where appropriate, one-way analysis of variance (ANOVA) or t-tests were used to compare the patients with controls. Univariate repeated-measures ANOVA was used to study longitudinal changes. RESULTS: Preoperatively, patients' morphologic measurements were characteristic of VME compounded by mandibular retrognathia. At surgery, the maxilla was elevated an average of 2.8 mm, and the mandible was lengthened by an average of 7.1 mm. All of the postoperative morphologic measurements were closer to normal values. The patients' masseter mechanical advantage was significantly lower than that of controls both before and after surgery. Surgically induced changes in mechanical advantage were very small. The patients' maximum range of motion and excursion during mastication were all lower than those of controls before surgery. All measurements of mobility decreased immediately after surgery, with a gradual return to preoperative values. However, even 3 years after surgery, all of the motion measurements remained smaller than those of the controls. Before surgery, the patients had maximum isometric bite forces significantly lower than those of controls. Bite forces increased significantly after surgery, approaching normal values within 2 years. The activity levels in the muscles of mastication during isometric bites were not significantly altered by surgery. CONCLUSIONS: This study confirms that VME/retrognathia patients suffer from substantial deficiencies in their oromotor function. Surgical correction of this particular type of dentofacial deformity improves both the morphologic and functional deficits. Although some changes were not statistically significant, all were toward normalization of the presurgical values.     

Hormone anchored metal complexes. 1. Synthesis, structure, spectroscopy and in vitro antitumor activity of testosterone acetate thiosemicarbazone and its metal complexes

Testosterone acetate thiosemicarbazone (TATSC, 17-beta-hydroxyandrost-4-one acetate thiosemicarbazone) was synthesized and characterized by single crystal X-ray structure determination. The copper and platinum complexes of this steroid derivative were synthesized and characterized by spectroscopy and electrochemiatry. The in vitro activity of these compounds against human breast cancer cell line MCF-7 was tested. The highest activity was found for the [Pt(TATSC)Cl(1)] followed by [Cu(TATSC)Cl(2)] and the ligand in compariosn with cisplatin.