Characterisation of interfaces in nanocrystalline palladium

Structures of grain boundaries and triple line junctions in nanocrystalline materials are of interest owing to large fractions of atoms in nanocrystalline materials being at these interfacial positions. Grain boundary and triple line junction structures in nanocrystalline palladium have been studied using high-resolution transmission electron microscopy (HRTEM). The main micro structural features observed include the varying atomic structures of grain boundaries and the presence of disordered regions at triple line junctions. Also, there is variation in lattice parameters in different nanocrystalline grains. Geometric phase analysis is used to quantify atomic displacements within nanocrystalline grains. Displacement fields thus detected indicate links to the interface structures.     

Thermal expansion characteristics of a titanium modified austenitic stainless steel: measurement by high-temperature X-ray diffraction and modelling using Grüneisen formalism

The thermal expansion of a titanium modified, swelling resistant austenitic stainless steel designated as D9 is studied by measuring the lattice parameter as a function of temperature in the range 300-1300 K by high-temperature X-ray diffraction technique. The thermal expansion data thus obtained is in reasonable agreement with the typical thermal expansion values reported for similar nuclear grade austenitic stainless steels. However, at temperatures exceeding 900 K, the measured thermal expansivity exhibits a pronounced non-linear increase due partly to the precipitation of complex carbide and intermetallic phases. The high-temperature thermal expansion data obtained in the present study are augmented by modelling the low-temperature thermal expansion behaviour by Grüneisen formalism.     

Plackett-burman design for determining the preference of Rhizomucor miehei lipase for FA in acidolysis reactions with coconut oil

The preference of lipase (EC 3.1.1.3) from Rhizomucor miehei in the incorporation of 11 FA, ranging from C10∶0 to C22∶6, into coconut oil TAG during acidolysis was studied by applying the Plackett-Burman experimental design. Enzymatic acidolysis reactions were carried out in hexane at 37°C for 48 h with coconut oil (0.1 M) and a mixture of 11 FA at a TAG to FA molar ratio of 1∶1. Lipase was used at the 5 wt% level. The incorporation of FA into coconut oil TAG was determined by GC. The lipase showed preference for long-chain saturated FA for incorporation into coconut oil TAG. The FA with 18 carbon atoms showed a high incorporation rate (18∶1>18∶1>18∶3). The lipase showed the least preference for the incorporation of 12∶0, which occurs in maximal concentration (46%), whereas the most preferred FA, 18∶0, occurs at a very low concentration (<2%) in coconut oil. The overall preference of lipase for the incorporation of different FA into coconut oil TAG was 18∶0>18∶2, 22∶0>18∶1, 18∶3, 14∶0, 20∶4, 22∶6>16∶0>12∶0≫10∶0.     

Provably secure blockchain privacy-preserving smart contract centric dynamic group key agreement for large WSN

The Journal of Supercomputing - The contemporary Group Key Agreement (GKA) entails lightweight computing, reduced communication, decentralized certification, personal privacy protection,...     

13C CP/MAS NMR Spectroscopy of Native and Acid Modified Starches

¹³CP/MAS NMR spectroscopic studies of some starches from cereals (wheat, maize and finger millet), pulses (green gram, chick pea), tuber (potato) and root (tapioca), and their respective acid (HCI, HNO₃) modified starches were carried out. While cereal starches exhibited a triplet signal for their anomeric carbons, pulse, tuber and root starches showed doublets. Line width changes in signals indicated that debranching in the above modified starches led to narrowing of C₆ signals (more pronounced in the case of potato and tapioca starches) and were consistent with the release of branching strains. Potato starch, both native and modified, was found to be different from other starches as inferred from the chemical shift values for their anomeric carbons and line shape. The dihedral angle (ϕ′2) calculated from chemical shift values for C₁ and conformation of dihedral angel (x) as predicted from chemical shift of C₆ are discussed with respect to structural organization.     

Inhibition of Rhizomucor miehei and Candida rugosa lipases by D-glucose in esterification between L-alanine and D-glucose

A detailed kinetic study of the esterification of D-glucose with L-alanine catalyzed by lipases from Rhizomucor miehei (RML) and Candida rugosa (CRL) showed that both lipases follow the Ping-Pong Bi-Bi mechanism, in which L-alanine and D-glucose bind in subsequent steps releasing water and L-alanyl-D-glucose, with competitive substrate inhibition by D-glucose at higher concentrations leading to the formation of dead-end lipase.D-glucose complexes. An attempt to obtain the best fit of this kinetic model through curve fitting yielded good approximates of the apparent values of four important kinetic parameters: for RML-k(cat)=0.29+/-0.028x10(-3) M h(-1) mg(-1), K(m L-alanine)= 4.9+/-0.51x10(-3) M, K(m D-glucose)=0.21+/-0.018x10(-3) M, and K(i D-glucose)=1.76+/-0.19x10(-3) M; for CRL-k(cat)= 0.75+/-0.08x10(-3) M h(-1) mg(-1), K(m L-alanine)=56.2+/-5.7x10(-3) M, K(m D-glucose)=16.2+/-1.8x10(-3) M, and K(i D-glucose) =21.0+/-1.9x10(-3) M.     

Synthesis of nanoparticles of barium lanthanum hafnium oxide by a modified combustion process

Barium lanthanum hafnium oxide, a complex perovskite ceramic, has been synthesized as nanoparticles by a modified combustion process for the first time. The Ba, La, and Hf ions required for the formation of Ba2LaHfO5.5 were obtained in solution by dissolving in boiling nitric acid a stoichiometric mixture of BaCO3, La2O3, and HfO2 that had been heated at 1200 degrees C for 4 h. By complexing the ions with citric acid and using ammonia as fuel, it was possible to get Ba2LaHfO5.5 as nanoparticles in a single-step combustion process. The powder obtained by the present combustion process was characterized by X-ray diffraction, BET surface area analysis, differential thermal analysis, thermogravimetric analysis, infrared spectroscopy, and scanning and high-resolution transmission electron microscopy. According to the results of X-ray and electron diffraction, the powder synthesized through the combustion process showed single-phase barium lanthanum hafnium oxide. The transmission electron microscopic investigations showed a grain size of 42 nm, with a standard deviation of 8 nm. The nanoparticles of Ba2LaHfO5.5 synthesized by the present combustion technique could be sintered to > 97% of the theoretical density at a relatively low temperature of 1425 degrees C. Scanning electron microscopic studies on the sintered Ba2LaHfO5.5 samples showed that the final grain size of the sintered specimen was < 500 nm.     

Scheduling and sequencing of rubber compounds on banbury mixers in a tyre company

Scheduling and sequencing compounds on banbury mixers is a daily production planning function in a tyre company. The current scheduling procedures are based on experience. A number of factors, such as, capacity, cost, time, speed, set-up of mixers, compound changeovers, density and demand of compound, have to be considered during planning. In this paper, we propose a two-stage approach to this problem. This approach can be easily computerised to aid the personnel in the planning function. An example, considering actual data obtained from the company, is used to illustrate the approach. The current scheduling practice by company personnel, as inferred from past record, is also reported.     

Pramila Rao · D. Sujatha · K. Rathina Raj · S. Vishwanatha · K. Narasimhamurthy · P. Saibaba · D. Narasimha Rao · S. Divakar

 Subchronic toxicity dietary studies were conducted in albino rats on the safety aspects of residual β-cyclodextrin in egg samples treated for cholesterol removal at concentrations of 250, 125 and 20 ppm for a period of 90 days. Daily food intake, body weight gain, relative organ weights, histopathology, haematology and serum enzyme activities were studied. The study however, did not reveal any toxicity at any of the levels tested. It can therefore be concluded from the present study that β-cyclodextrin-treated egg samples do not cause any toxicity. Received: 28 September 1999     

Thermal stability of CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> multilayer thin films prepared by pulsed laser deposition

Multilayers of CeO₂/ZrO₂ thin films were deposited on Si (100) substrates using pulsed laser deposition at an optimized oxygen partial pressure of 3×10⁻² mbar and at room temperature. The CeO₂ layer thickness was 10 nm, while the ZrO₂ layer thickness was varied as 10, 20 and 30 nm. CeO₂ and ZrO₂ layers were deposited alternately to obtain 25 bilayers. High temperature x-ray diffraction (HTXRD) results showed that the multilayer films had cubic ceria and tetragonal ZrO₂. Thermal expansion coefficients were calculated for CeO₂ and t-ZrO₂ and found to increase with the decrease of ZrO₂ layer thickness. The cross sectional transmission electron microscopy (XTEM) of CeO₂/ZrO₂ multilayer also indicated that ceria was found to be in cubic phase while zirconia contained predominantly tetragonal phase along with cubic phase in thermally annealed specimen.