Phase behavior,density, and crystallization of polyethylene in n‐pentane and in n‐pentane/CO2 at high pressures

The phase behavior and volumetric properties of polyethylene (PE) in solutions of n‐pentane and n‐pentane/CO₂ were studied in a temperature (T) range of 370–440 K at pressures up to 60 MPa. Measurements were conducted with a variable‐volume view‐cell system equipped with optical sensors to monitor the changes in the transmitted light intensity as the P or the T of the system was changed. Lower‐critical‐solution‐temperature‐type behavior was observed for all of the liquid–liquid (L–L) phase boundaries, which shifted to higher pressures in solutions containing CO₂. The solid–fluid (S–F) phase boundaries were investigated over a P range of 8–54 MPa and took place in a narrow T range, from 374 to 378 K in this P interval. The S–F phase boundary showed a unique feature in that the demixing temperatures showed both increasing and decreasing trends with P depending on the P range. This was observed in both the PE/n‐pentane and PE/n‐pentane/CO₂ mixtures. The density of these solutions were measured as a function of P at selected temperatures or as a function of T at selected pressures that corresponded to the paths followed in approaching the phase boundaries (S–F or L–L) starting from a homogeneous one‐phase condition. The data showed a smooth variation of the overall mixture density along these paths. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2201–2209, 2003     

Use of Warranties on Highway Projects: A Real Option Perspective

Since the introduction of warranty provisions in federal highway jobs, more and more state departments of transportation (DOTs) have considered the use of such provisions to protect their initial investment. This paper describes the pros and cons of warranty contracting in highway construction based on a survey of warranty practices in the United States. In particular, the need for state DOTs to buy a warranty for a well-built project is questioned. As an alternative, this paper introduces the warranty option, which gives the DOT the right to buy a warranty only if it becomes necessary at the end of construction. This option is exercised if the performance on site warrants it. This paper describes the mechanics of the warranty option and its advantages over the conventional warranty. A bid evaluation model is also developed for the warranty option approach.     

Generic visual analysis for multi- and hyperspectral image data

Multi- and hyperspectral imaging and data analysis has been investigated in the last decades in the context of various fields of application like remote sensing or microscopic spectroscopy. However, recent developments in sensor technology and a growing number of application areas require a more generic view on data analysis, that clearly expands the current, domain-specific approaches. In this context, we address the problem of interactive exploration of multi- and hyperspectral data, consisting of (semi-)automatic data analysis and scientific visualization in a comprehensive fashion. In this paper, we propose an approach that enables a generic interactive exploration and easy segmentation of multi- and hyperspectral data, based on characterizing spectra of an individual dataset, the so-called endmembers. Using the concepts of existing endmember extraction algorithms, we derive a visual analysis system, where the characteristic spectra initially identified serve as input to interactively tailor a problem-specific visual analysis by means of visual exploration. An optional outlier detection improves the robustness of the endmember detection and analysis. An adequate system feedback of the costly unmixing procedure for the spectral data with respect to the current set of endmembers is ensured by a novel technique for progressive unmixing and view update which is applied at user modification. The progressive unmixing is based on an efficient prediction scheme applied to previous unmixing results. We present a detailed evaluation of our system in terms of confocal Raman microscopy, common multispectral imaging and remote sensing.     

The Effectiveness of Latent Semantic Analysis for Building Up a Bottom-up Taxonomy from Folksonomy Tags

In this paper, we evaluate the effectiveness of a semantic smoothing technique to organize folksonomy tags. Folksonomy tags have no explicit relations and vary because they form uncontrolled vocabulary. We discriminates so-called subjective tags like “cool” and “fun” from folksonomy tags without any extra knowledge other than folksonomy triples and use the level of tag generalization to form the objective tags into a hierarchy. We verify that entropy of folksonomy tags is an effective measure for discriminating subjective folksonomy tags. Our hierarchical tag allocation method guarantees the number of children nodes and increases the number of available paths to a target node compared to an existing tree allocation method for folksonomy tags.     

Emergence of photoluminescence on bulk MoS<Subscript>2</Subscript> by laser thinning and gold particle decoration

We demonstrate a facile and effective approach to significantly improve the photoluminescence of bulk MoS₂ via laser thinning followed by gold particle decoration. Upon laser thinning of exfoliated bulk MoS₂, photoluminescence emerges from the laser-thinned region. After further treatment with an AuCl₃ solution, gold particles self-assemble on the laser-thinned region and thick edges, further increasing the fluorescence of bulk MoS₂ 28 times and the Raman response 3 times. Such fluorescence enhancement can be attributed to both surface plasmon resonance and p-type doping induced by gold particles. The combination of laser thinning and AuCl₃ treatment enables the functionalization of bulk MoS₂ for optoelectronic applications. It can also provide a viable strategy for mask-free and area-selective p-type doping on single MoS₂ flakes.

Open image in new window

     

Integration of “Components” to Test Software Components

We present an ongoing research project aimed at developing a framework for component-based testing, in which we re-use and suitably combine some existing tools: the system architecture and the components are specified by the UML, and specifically the recently proposed UML Components methodology; the test cases are derived by applying the Cow_Suite, an environment for UML-based testing, previously conceived for the integration testing of OO systems; and the tests are codified and executed within the CDT, a framework under development, allowing for the decoupling between the abstract specification of tests, which is made against an architectural model, and their concrete execution, which needs to take into account the component implementations.     

Particle-based simulation of the interaction between fluid and knitwear

We present a particle-based method to simulate and visualize the interaction of knitwear with fluids. The knitwear is modeled using spring-mass systems and the fluid is modeled using the smoothed particle hydrodynamics method. Two-way coupling is achieved by considering surface tension, capillary, and interparticle forces between the fluid and knitwear. The simulation of fluid and knitwear particles is performed on the graphics processing unit. Photorealistic rendering of knitwear and fluid is achieved by using a hardware-accelerated rasterization-based rendering technique. Our method is able to simulate and visualize the macro- and microstructure of free-form knitwear and reflective and refractive characteristics of the fluid surface.     

Arduino-based slider setup for gas–liquid mass transfer investigations: Experiments and CFD simulations

The implementation of traditional sensors is a drawback when investigating mass transfer phenomena within microstructured devices, since they disturb the flow and reactor characteristics. An Arduino based slider setup is developed, which is equipped with a computer-vision system to track gas–liquid slug flow. This setup is combined with an optical analytical method allowing to compare experimental results against CFD simulations and investigate the entire lifetime of a single liquid slug with high spatial and temporal resolution. Volumetric mass transfer coefficients are measured and compared with data from literature and the mass transfer contribution of the liquid film is discussed.     

Curing cycle modification for RTM6 to reduce hydrostatic residual tensile stress in 3D woven composites

Triaxial residual tensile stresses resulting after cooling a 3D woven composite from the curing temperature cause cracking in the resin pockets for weave architectures that have high through‐the‐thickness constraint. We show how curing cycle modifications can reduce the hydrostatic tensile stress generated by thermal mismatch during cooling of Hexcel RTM6 epoxy resin constrained in a quartz tube which simulates extreme constraint in a composite. The modified curing schedule consists of a high temperature cure to just before the glass transition, a lower temperature hold that takes the resin through the glass transition thereby freezing in the zero stress state, followed by high temperature cure to bring the resin to full conversion. We show that this process is sensitive to heating rates and can reduce the zero stress state of non‐toughened RTM6 resin to a temperature similar to a commercial rubber‐toughened resin, Cycom PR520. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43373.     

Effect of gas permeation temperature and annealing procedure on the performance of binary and ternary mixed matrix membranes of polyethersulfone,SAPO‐34, and 2‐hydroxy 5‐methyl aniline

This study investigated the effect of annealing time and temperature on gas separation performance of mixed matrix membranes (MMMs) prepared from polyethersulfone (PES), SAPO‐34, and 2‐hydroxy 5‐methyl aniline (HMA). A postannealing period at 120°C for a week extensively increased the reproducibility and stability of MMMs, but for pure PES membranes no post‐annealing was necessary for stable and reproducible performance. The effect of operation temperature was also investigated. The permeabilities of H₂, CO₂, and CH₄ increased with increasing permeation temperature from 35°C to 120°C, yet CO₂/CH₄ and H₂/CH₄ selectivities decreased. PES/SAPO‐34/HMA ternary and PES/SAPO‐34 binary MMMs exhibited the highest ideal selectivity and permeability values at all temperatures, respectively. For H₂/CO₂ pair, when temperature increased from 35°C to 120°C, selectivity increased from 3.2 to 4.6 and H₂ permeability increased from 8 to 26.5 Barrer for ternary MMM, demonstrating the advantage of using this membrane at high temperatures. The activation energies were in the order of CH₄ > H₂ > CO₂ for all membranes. PES/SAPO‐34/HMA membrane had activation energies higher than that of PES/SAPO‐34 membrane, suggesting that HMA acts as a compatibilizer between the two phases. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40679.