Clonal variation in reproductive response to temperature by a potential bulking control agent, Lecane inermis (Rotifera)

The novel idea of using rotifers Lecane inermis (Rotifera, Monogononta) as a tool to overcome activated sludge bulking generates an on-going need to study rotifer biology. The results of biological research on rotifers can serve to improve the method so that it can be most effective when applied in treatment plants. The aim of this study was to test the effect of temperature on four selected rotifer clones originating from different treatment plants. The rate of population development from a single individual (parthenogenetic female) during a 10-day experiment was measured at three temperatures: 8, 15 and 20 degrees C. The temperatures used reflect the annual temperature distribution in the majority of municipal wastewater treatment plants in the temperate zone. The growth rate coefficient (r) and doubling time (tD) were calculated for each clone. Under the most favourable conditions (20 degrees C), rvalues varied between 0.41 and 0.47 d and doubling time between 1.5 and 1.7 d. At a temperature of 15 degrees C, the doubling time was approximately two times longer (2.5-3.4 d). The strongest intraspecific variations were observed at the lowest temperature of 8 degrees C. At this temperature, one of the clones almost failed to proliferate, and another exhibited a doubling time of 7.9 d. The doubling times were a few times greater for the remaining two clones (60 d for Lk1, 33.3 d for Lk4). These results could be very useful in predicting the chances that the rotifers would survive in a biological reactor in a wastewater treatment plant at the temperatures used in these reactors.     

Highly Enantioselective Production of (R)-Halohydrins with Whole Cells of Rhodotorula rubra KCh 82 Culture

Biotransformation of ten α-haloacetophenones in the growing culture of the strain Rhodotorula rubra KCh 82 has been carried out. Nine of the substrates underwent an effective enantioselective reduction to the respective (R)-alcohols according to Prelog’s rule, with the exception of 2-chloro-1,2-diphenylethan-1-one that was not transformed by this strain. The expected reduction proceeded without dehalogenation, leading to the respective (R)-halohydrins in high yields. The use of this biocatalyst yielded (R)-2-bromo-1-phenyl-ethan-1-ol (enantiomeric excess (ee) = 97%) and its derivatives: 4''-Bromo- (ee = 99%); 4''-Chloro- (ee > 99%); 4''-Methoxy- (ee = 96%); 3''-Methoxy- (ee = 93%); 2''-Methoxy- (ee = 98%). There were also obtained and characterized 2,4''-dichloro-, 2,2'',4''-trichloro- and 2-chloro-4''-fluoro-phenyetan-1-ol with >99% of enantiomeric excesses.     

Solution of the inverse problem in solidification of binary alloy by applying the ACO algorithm

The paper presents a solution of the inverse problem consisting in reconstruction of the heat flux and the distribution of temperature in the process of binary alloy solidification when the temperature measurements in the selected points of the alloy are known. The considered task is mathematically modelled by means of the heat conduction equation with the substitute thermal capacity and with the liquidus and solidus temperatures varying in dependence on the concentration of the alloy component, whereas for describing the concentration the lever arm model is applied. An important part of the procedure consists in minimization of some functional executed with the aid of ACO algorithm.     

Spontaneous formation of polylactide stereocomplex microspheres containing metal ions

Linear poly(l ‐lactides) (PLLAs ) and poly(d ‐lactides) (PDLAs ) with M _n in the range 2000 ? 4300 containing a different number and placement of carboxyl groups were obtained via cationic ring‐opening polymerization and post‐polymerization functionalization. PLA stereoisomers (PLLA ‐(COOH )_x and PDLA ‐(COOH )_x , where x = 1 ? 3) were used for the investigation of stereocomplexation in solution performed in the presence of metal cations such as Ca²⁺, Mg²⁺, Zn²⁺, Fe³⁺. Spherical microparticles with a diameter in the range 0.7 ? 3.0 µm were obtained in all cases which was confirmed on the basis of scanning electron microscopy (SEM ) analysis. The microsphere size and homogeneity were analyzed depending on the stereocomplexation conditions and the molecular weight as well as the number of carboxyl end groups in the PLLA and PDLA used for stereocomplexation. The PLA microspheres obtained were analyzed by Fourier transform IR spectroscopy, wide angle X‐ray spectroscopy and energy‐dispersive X‐ray spectroscopy methods which confirmed the presence of metal cations inside. The application of regular microspheres with metal ions as drug delivery systems is considered. © 2016 Society of Chemical Industry     

Self‐nucleation–induced nonisothermal crystallization of nylon 6 from the melt

The effect of thermal treatment over a wide range of temperature (130–280°C) on the crystallization behavior of nylon 6 was studied by using DSC, FTIR, and polarized light microscope equipped with a hot stage. The crystallization and the subsequent melting behavior of the nylon 6 samples treated at different temperatures (T_s) were classified into four types. When T_s was higher than 236°C or lower than 213°C, the crystallization behavior of nylon 6 was insensitive to the variation of T_s. When T_s was in the range of 213–235°C, the crystallization behavior was sensitive to the change of T_s. The polarized light microscopic experiments have demonstrated that a large amount of tiny ordered nylon 6 segments/cluster persisted when nylon 6 film are heated to 231°C. Consequently, the fastest crystallization speed was observed. As T_s was between 214 and 223°C, both the T_m and the ΔH_m were higher than those of the nylon 6 samples treated at other temperature. The polarized light microscopic investigations have also demonstrated that molten nylon 6 crystallizes by using the un‐molten nylon 6 crystals as nucleation center at 220°C. Crystallization at higher temperature produces nylon 6 with thicker crystalline lamella. The above results are helpful for rational design of thermal treatment procedure to obtain nylon 6 with different crystalline features. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42413.     

Role of Obesity,Physical Exercise,Adipose Tissue-Skeletal Muscle Crosstalk and Molecular Advances in Barrett’s Esophagus and Esophageal Adenocarcinoma

Both obesity and esophageal adenocarcinoma (EAC) rates have increased sharply in the United States and Western Europe in recent years. EAC is a classic example of obesity-related cancer where the risk of EAC increases with increasing body mass index. Pathologically altered visceral fat in obesity appears to play a key role in this process. Visceral obesity may promote EAC by directly affecting gastroesophageal reflux disease and Barrett’s esophagus (BE), as well as a less reflux-dependent effect, including the release of pro-inflammatory adipokines and insulin resistance. Deregulation of adipokine production, such as the shift to an increased amount of leptin relative to “protective” adiponectin, has been implicated in the pathogenesis of BE and EAC. This review discusses not only the epidemiology and pathophysiology of obesity in BE and EAC, but also molecular alterations at the level of mRNA and proteins associated with these esophageal pathologies and the potential role of adipokines and myokines in these disorders. Particular attention is given to discussing the possible crosstalk of adipokines and myokines during exercise. It is concluded that lifestyle interventions to increase regular physical activity could be helpful as a promising strategy for preventing the development of BE and EAC.     

Extracellular Nucleotides Affect the Proangiogenic Behavior of Fibroblasts,Keratinocytes, and Endothelial Cells

Chronic wound healing is currently a severe problem due to its incidence and associated complications. Intensive research is underway on substances that retain their biological activity in the wound microenvironment and stimulate the formation of new blood vessels critical for tissue regeneration. This group includes synthetic compounds with proangiogenic activity. Previously, we identified phosphorothioate analogs of nucleoside 5′-O-monophosphates as multifunctional ligands of P2Y6 and P2Y14 receptors. The effects of a series of unmodified and phosphorothioate nucleotide analogs on the secretion of VEGF from keratinocytes and fibroblasts, as well as their influence on the viability and proliferation of keratinocytes, fibroblasts, and endothelial cells were analyzed. In addition, the expression profiles of genes encoding nucleotide receptors in tested cell models were also investigated. In this study, we defined thymidine 5′-O-monophosphorothioate (TMPS) as a positive regulator of angiogenesis. Preliminary analyses confirmed the proangiogenic potency of TMPS in vivo.     

Existing Drugs Considered as Promising in COVID-19 Therapy

COVID-19 is a respiratory disease caused by newly discovered severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The disease at first was identified in the city of Wuhan, China in December 2019. Being a human infectious disease, it causes high fever, cough, breathing problems. In some cases it can be fatal, especially in people with comorbidities like heart or kidney problems and diabetes. The current COVID-19 treatment is based on symptomatic therapy, so finding an appropriate drug against COVID-19 remains an immediate and crucial target for the global scientific community. Two main processes are thought to be responsible for the COVID-19 pathogenesis. In the early stages of infection, disease is determined mainly by virus replication. In the later stages of infection, by an excessive immune/inflammatory response, leading to tissue damage. Therefore, the main treatment options are antiviral and immunomodulatory/anti-inflammatory agents. Many clinical trials have been conducted concerning the use of various drugs in COVID-19 therapy, and many are still ongoing. The majority of trials examine drug reposition (repurposing), which seems to be a good and effective option. Many drugs have been repurposed in COVID-19 therapy including remdesivir, favipiravir, tocilizumab and baricitinib. The aim of this review is to highlight (based on existing and accessible clinical evidence on ongoing trials) the current and available promising drugs for COVID-19 and outline their characteristics.