Effect of gas mixing ratio on gas-phase composition and etch rate in an inductively coupled CF4/Ar plasma

In this work, we carried out investigations aimed at understanding the effect of gas mixing ratio on plasma parameters, gas phase composition and etch rate in CF₄/Ar inductively coupled plasma. For this purpose, a combination of experimental methods and modelling was used. Experiments showed that electron temperature and electron density are not very sensitive to variations of Ar content in CF₄/Ar plasma. From a zero-dimensional plasma model, the densities of both neutral and charged particles change monotonically. The analysis of surface kinetics based on an ion-assisted etching mechanism showed the possibility of non-monotonic etch rate behaviour due to a concurrence of chemical and physical etching pathways.     

Effects of high oxygen concentrations on microbial biosensor signals. Hyperoxygenation by means of perfluorodecalin

Amperometric biosensors register oxygen depletion in response to analyte catabolism, and thus are limited by the availability of dissolved oxygen. Microbial sensors containing immobilized cells of Gluconobacter oxydans were hyperoxygenated to 400% of control levels and the effects on sensor responses to glucose were determined. Oxygenated perfluorodecalin (a completely fluorinated organic substance) was as effective in hyperoxygenation as direct sparging with O2, increasing sensor base medium oxygen concentrations from 9.3 to 37 mg/l. Hyperoxygenation enhanced maximal biosensor response amplitudes, particularly at high cell loading densities. Maximal response rates were also improved, although less dramatically. Results suggest that hyperoxygenation may be a new general approach for modulating biosensor responses.     

Dynamic “Molecular Portraits” of Biomembranes Drawn by Their Lateral Nanoscale Inhomogeneities

To date, it has been reliably shown that the lipid bilayer/water interface can be thoroughly characterized by a sophisticated so-called “dynamic molecular portrait”. The latter reflects a combination of time-dependent surface distributions of various physicochemical properties, inherent in both model lipid bilayers and natural multi-component cell membranes. One of the most important features of biomembranes is their mosaicity, which is expressed in the constant presence of lateral inhomogeneities, the sizes and lifetimes of which vary in a wide range—from 1 to 10³ nm and from 0.1 ns to milliseconds. In addition to the relatively well-studied macroscopic domains (so-called “rafts”), the analysis of micro- and nanoclusters (or domains) that form an instantaneous picture of the distribution of structural, dynamic, hydrophobic, electrical, etc., properties at the membrane-water interface is attracting increasing interest. This is because such nanodomains (NDs) have been proven to be crucial for the proper membrane functioning in cells. Therefore, an understanding with atomistic details the phenomena associated with NDs is required. The present mini-review describes the recent results of experimental and in silico studies of spontaneously formed NDs in lipid membranes. The main attention is paid to the methods of ND detection, characterization of their spatiotemporal parameters, the elucidation of the molecular mechanisms of their formation. Biological role of NDs in cell membranes is briefly discussed. Understanding such effects creates the basis for rational design of new prospective drugs, therapeutic approaches, and artificial membrane materials with specified properties.     

Production and use of polypropylene fibres and yarn

World production of PP fibres in 2004 was approximately 6.3 million tons, including 2.1 million tons of film fibres. The total consumption of PP fibres, including spunbond/meltblown, on the European continent increased by 2.5% in 2004, reaching 2.4 million tons. In the near future, expansion of use of PP fibres for production of nonwovens is projected. The world market capacity will increase by 2008 to 3.55 million tons, including up to 1.0 million tons in North American countries. A wide assortment of PP products in the form of films, ribbons, fibrillized materials, staple fibre, complex yarns, spunbond, meltblown, etc., for manufacturing bags, soft containers, agrotextiles, packaging, cables, carpets, hygienic and medical goods, etc., has been developed. __________ Translated from Khimicheskie Volokna, No. 5, pp. 3–7, September–October, 2006.     

Further Development of Ideas of G.V. Akimov on the Surface Oxide Films and Their Effect on the Corrosion and Mechanical Behavior of Aluminum Alloys

The importance of oxide films and their perfection in extending the application of aluminum alloys are shown. The composition and structure of oxide films formed by microarc oxidation on aluminum alloys of different alloying systems and production methods are studied. The dependence of the oxide coating properties on the parameters of microarc oxidation are found. The results obtained are discussed in terms of the existing concepts of microarc oxidation.     

DRYING KINETICS DERIVED FROM DIFFUSION EQUATION WITH FLUX-TYPE BOUNDARY CONDITIONS

A novel approach to drying of both hygroscopic and non-hygroscopic capillary - porous materials is presented. The equations for drying kinetics are obtained, based on the analytical solution of the differential equation of diffusion with a boundary condition in the form of the flux. Theoretical drying curves generated form the model solution compare well with experimental literature data for drying of materials with different sorption properties exemplified by wool bobbins, brick slabs and corn kernels.     

An Indo-Soviet experiment on anmhd generator test section at the Soviet U-02 facility

This paper summarizes the major results of the joint Indo-Soviet experiment for testing the Indianmhd generator channel section, designed and fabricated at the Bhabha Atomic Research Centre, Bombay, which was carried out at the U-02 facility in Moscow, USSR, in May 1980. The total test duration was 65 hours and included electrophysical tests and life tests under applied electric fields. The main purpose of the tests was to substantiate the physical concepts, computer codes, design features and special processing techniques involved in the development ofmhd generators for the Indian pilot plant at Tiruchirapalli. The experimental observations on the phenomena of heat transfer to the walls, gas dynamics in the channel, electrical characteristics of the generator and near-electrode processes including the analysis of arc spots correlate with the theoretical estimates based on present understanding of the physical processes occuring in similarmhd generators. The post-operational inspection of the channel section and extensive investigation of materials through microscopic analysis, chemical analysis and x-ray analysis are also reported in this paper. The joint test programme has clearly demonstrated the definite operating capability of the test section and has given sufficient information and encouragement for building better and improved channels for the future.     

Etching characteristics and mechanism of Pb(Zr,Ti)O3 thin films in CF4/Ar inductively coupled plasma

The effect of the CF₄/Ar mixing ratio on the etching behaviour and mechanisms for Pb(Zr,Ti)O₃ (PZT) thin films in an inductively coupled plasma was carried out. It was found that an increase of Ar mixing ratio causes non-monotonic behaviour of the PZT etch rate, which reaches a maximum of 2.38 nm/s at 80% Ar. Investigating the plasma parameters, we found a weak sensitivity of both electron temperature and electron density to the change of CF₄/Ar mixing ratio. A combination of zero-dimensional plasma model with the model of surface kinetics shows the possibility of a non-monotonic etch rate behaviour due to the concurrence of physical and chemical pathways in the ion-assisted chemical reaction.