Multi-verse optimization algorithm- and salp swarm optimization algorithm-based optimization of multilevel inverters

Neural Computing and Applications - Renewable energy sources are installed into both distribution and transmission grids more and more with the introduction of smart grid concept. Hence, efficient...     

Preparation of dye sensitized titanium oxide nanoparticles for solar cell applications

A new method for synthesis of titanium dioxide (TiO₂)-dye nanoparticles is reported. TiO₂ nanocrystals were obtained at 150 and 200 °C by using chemically bonded TiO₂-sensitizer dye as a precursor. Titanium tetraisopropoxide was first modified with a dye molecule and then precipitated by dropping into acidic water. A strongly colored precipitate was obtained. Hydrothermal growth of a colloidal solution was carried out in a Teflon-lined stainless steel autoclave. Dye sensitized solar cell efficiencies obtained were comparable and fill factor values were close to the analogous cells prepared by the use of conventional TiO₂ paste techniques. This method allows the use of different substrates together with nanocrystalline TiO₂ for many technological applications.     

Transferrin-Decorated Niosomes with Integrated InP/ZnS Quantum Dots and Magnetic Iron Oxide Nanoparticles: Dual Targeting and Imaging of Glioma

The development of multifunctional nanoscale systems that can mediate efficient tumor targeting, together with high cellular internalization, is crucial for the diagnosis of glioma. The combination of imaging agents into one platform provides dual imaging and allows further surface modification with targeting ligands for specific glioma detection. Herein, transferrin (Tf)-decorated niosomes with integrated magnetic iron oxide nanoparticles (MIONs) and quantum dots (QDs) were formulated (PEGNIO/QDs/MIONs/Tf) for efficient imaging of glioma, supported by magnetic and active targeting. Transmission electron microscopy confirmed the complete co-encapsulation of MIONs and QDs in the niosomes. Flow cytometry analysis demonstrated enhanced cellular uptake of the niosomal formulation by glioma cells. In vitro imaging studies showed that PEGNIO/QDs/MIONs/Tf produces an obvious negative-contrast enhancement effect on glioma cells by magnetic resonance imaging (MRI) and also improved fluorescence intensity under fluorescence microscopy. This novel platform represents the first niosome-based system which combines magnetic nanoparticles and QDs, and has application potential in dual-targeted imaging of glioma.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Effects of crushed clay brick aggregate on mortar durability

This paper reports an experimental study that aimed to investigate the effects of recycled clay brick, used as a part of fine aggregate, on mortar durability. The brick, in crushed form, was from a local brick manufacturer that salvages its off-standard products. It was used to replace 10% and 20% (by weight) of the river sand in mortar. Effects of the brick replacement on the mortar flow, compressive strength, shrinkage, freeze–thaw resistance, and alkali–silica reaction potential were investigated. The results showed that as the brick replacement level increased, the mortar flowability reduced. The 10% and 20% brick replacements had no negative effect on the mortar compressive strength and very limited effect on the mortar shrinkage. The freeze–thaw resistance of the mortar was improved by the brick replacement. However, the use of crushed brick as aggregate appeared not to reduce potential alkali–silica reaction. The microscopy study revealed the alkali–silica reaction product and associated cracking in the mortar. Additional study indicated that the brick aggregate used in the study had pessimum proportion, 30%, for the alkali–silica reaction expansion.     

Comparison of additive effects on the PVA/starch cryogels: Synthesis,characterization, cytotoxicity,and genotoxicity studies

The research goal of this study is to produce suitable scaffolds for tissue engineering applications. Different ratios of polyvinyl alcohol (PVA)/starch (90:10, 70:30, 50:50) and crosslinking methods have been used to prepare cryogels. Chemically crosslinked cryogels were synthesized using glutaraldehyde as the crosslinking agent. For the physically crosslinked cryogels, sodium dodecyl sulfate was used during cryogelation as the foaming agent. Chemical structure and pore morphology were demonstrated by Fourier transform infrared spectroscopy and scanning electron microscopy (SEM). Swelling ratio and degradation profile of the scaffolds were also determined. 3-(4,5-dimethylthiazoyl-2-yl)-2,5-diphenyltetrazolium bromide assay and SEM were used to investigate the biocompatibility of the scaffolds and cell morphology. Genotoxicity test was performed to show DNA fragmentation. The overall results demonstrated that PVA/starch cryogels could have potentially appealing application as scaffolds for tissue engineering applications and additives affect the architecture and characteristic properties of the cryogels.     

Optimization of EDGE terminal power amplifiers using memoryless digital predistortion

This paper describes a lookup-table (LUT)-based digital predistortion system usable for enhanced data for global system for mobile evolution (EDGE) handset transmitters. The system is memoryless and capable of improving average efficiency and performance in terms of the leakage power at offset frequencies and error vector magnitude. The obtainable efficiency at maximum linear output power is comparable, but at backoffs superior to commercial EDGE power amplifiers (PAs). Minimum system requirements on word length and LUT size have been investigated, which shows that a LUT having approximately 500 coefficients and a system word length of 13 bits are sufficient for EDGE. The proposed system is simple compared to basestation implementations comprising PA memory compensation and can be easily implemented in handsets in order to improve the overall system performance. The effects of antenna mismatch on system performance have been investigated     

μ‐Consortium: Aufbau einer mobilen Anlage für die Aus‐ und Weiterbildung in der Mikroverfahrenstechnik

A mobile plant for practical training was developed as part of the project μ‐Consortium to integrate micro process engineering into teaching. Lab experiments in the fields of mixing and homogenous reactions, heterogeneous reactions, heat transfer and particle synthesis were worked out to impart knowledge of different process‐engineering operations.     

Propolis and carnauba wax-based safflower oil oleogels as fat substitutes in cakes: Production,oxidative stability,and characterization

In this study, safflower oil oleogels were made using propolis wax and carnauba wax in three different concentrations each, and their effectiveness as a fat substitute in cake was evaluated afterward. Oleogels' oxidative stability and characterization were looked into. In oleogels, the oil binding capacity, solid fat content, and crystallization time were all assessed. The cakes underwent an examination for moisture content, texture, and sensory evaluation. Additionally, analyses of fatty acid composition, free fatty acidity, oxidative stability (peroxide value, conjugated diene-triene), 3-monochloropropane-1,2-diol (3-MCPD), and glycidyl were carried out both before and after baking in oleogels and shortening. Several of the physical, textural, and sensory qualities of the oleogel-based cakes were acceptable when compared to those of the shortening-based cakes. The general acceptability of cakes made with carnauba wax was very high and almost under control. The acceptability of cakes made with propolis wax oleogels was lower than this. The study of these criteria has shown that safflower oil-based carnauba and propolis wax oleogels can be utilized to produce high-quality, healthful cakes with a high amount of unsaturated fatty acids. Practical Applications : To replace fat phases in cake products high in saturated fatty acids and to enhance the fatty acid profile of the cakes, safflower oil-based oleogels with propolis wax and carnauba wax are a very good option. The results obtained provide useful information for the production of high-quality cakes with higher unsaturated fatty acid content, recommended for a healthier diet, with these oleogels containing different concentrations of oleogelator.