Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

Effect of water pretreatment on CO<Subscript>2</Subscript> capture using a potassium-based solid sorbent in a bubbling fluidized bed reactor

A bubbling fluidized bed reactor was used to study CO₂ capture from flue gas by using a potassium-based solid sorbent, sorbKX35 which was manufactured by the Korea Electric Power Research Institute. A dry sorbent, sorbKX35, consists of K₂CO₃ for absorption and supporters for mechanical strength. To increase initial CO₂ removal, some amount of H₂O was absorbed in the sorbent before injecting simulated flue gas. It was possible to achieve 100% CO₂ removal for more than 10 minutes at 60°C and a residence time of 2 s with H₂O pretreatment. When H₂O pretreatment time was long enough to convert K₂CO₃ of sorbKX35 into K₂CO₃ · 1.5H₂O, CO₂ removal was excellent. The results obtained in this study can be used as basic data for designing and operating a large scale CO₂ capture process with two fluidized bed reactors. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Methodology for Designing a Laser-Based Additive Process for the Formation of a Lattice Periodic Structure on the Surface of an Aluminum Alloy Plate

Automation and Remote Control - The paper presents the results of studying the “directed energy deposition” additive technological process aimed at improving the mechanical properties...     

Migration of an incommensurate high-angle grain boundary

A model is proposed for the migration of a high-angle grain boundary; it is based on the consideration of local atomic configurations and their restructuring. Various competing restructuring mechanisms are discussed. The boundary migration velocity is shown to depend nonlinearly on the thermodynamic driving force at a low value of this force. The shape of this dependence is determined by the driving force and a boundary structure.     

Effect of preparation conditions on nanostructural features of the NAFION® type perfluorinated proton conducting membranes

Features of the fine structure of three samples of perfluorinated Nafion® type membranes—Nafion-115, its Russian analogue MF-4SK, and a new similar material PFM-E produced according to our novel water-emulsion technique—have been characterized using the small-angle neutron scattering technique. A difference in the regularity of common elements of fine structure (cylindrical channels) in the membranes has been revealed. Nafion-115 has the most regular structure with a diffraction peak corresponding to the double channel diameter and an additional broad maximum in the scattering curve indicating a long-range order in the arrangement of straight cylindrical channels. For MF-4SK, in addition, twisted and less ordered channels have been observed. In the PFM-E sample channels have a tortuous and branched structure with diameters similar to Nafion-115. Only a short-range order (40–50 Å) in the arrangement of the channels has been detected, and correlation in their mutual orientation at longer distances is weakened. It has been supposed that the observed branched structure of the channels promotes an increase in water content and an improvement in proton conductivity.     

Polymer composite materials: Technologies and applications

The physicomechanical properties of polymer composites based on aramide fibers that are obtained by the wet-spinning technique with the use of epoxy binders are discussed. The chemical structures of reinforcing fibers and components of epoxy binders; the microstructures, surface structures, and some properties of aramide fibers; and the processes of manufacturing high-strength reinforced composites on their basis are described. Some product samples made of these composites are presented. The investigated reinforcing materials possess high tensile strengths and tensile moduli, which make it possible to obtain products with a high level of operational characteristics on their basis.     

The effects of reduction of the deposited waste on short‐term landfill leachate composition of a landfill: a case study in Norway

Municipal solid waste landfill leachate was sampled over from a landfill receiving varying amounts of municipal solid waste. The investigation aimed to provide information on expected leachate changes in the short term, either after closure of an active landfill, or after a strong decline in the amount of waste deposited at smaller landfills. It was found that during a two year period following a sudden decline in the amount of waste deposited, the levels of various chemical and physical parameters all dropped sharply. The reasons for the decline in discharge levels are thought to be aerobic decomposition taking place in the municipal solid waste just after landfilling, and thus the decline in the impact of this process when there were less fresh waste masses available, and formation of preferential flow paths for the leachate as the municipal solid waste stabilized in the landfill.