Emergency egress for the elderly in care home fire situations

Practitioners are continuing to develop egress modelling software for the design of the built environment. These models require data about human behaviour and factors for calibration, validation and verification. This study aims to address the specific data and knowledge gap: emergency egress of the elderly. Such data are difficult to collect given privacy and consent concerns, with strong relationships generally being required between residences and researchers. Through the observation of nine fire drills at six Canadian long-term care (LTC) and retirement homes, specific evacuation actions and behaviour were observed for 37 staff members and information about the evacuation of 56 residents was collected. These drills demonstrated that emergency egress in LTC and retirement homes is highly staff dependent with 72% of residents recorded requiring full assistance at all stages of movement in evacuation, and that the type of announced/unannounced drill and level of resident care will affect the type of data collected. The development of travel speed and pre-movement is discussed subject to limitation with qualitative behavioural insights of residents that were observed. This study provides valuable methodological discussion on how to conduct behavioural studies in similar highly restricted research environments. Specific attention is given to understanding the considerations that must be made when using fire drills as data sources, and the impact that these can have on using such data for modelling. This study may inform the initial setup and programming of evacuation models from an actions and behavioural perspectives of staff members and residents.     

Income, Time Effects and Direct Preferences in a Multimodal Choice Context: Application of Mixed RP/SP Models with Non-Linear Utilities

Transport problems typically involve at least two types of constraints, on income and on time. Therefore, the indirect utility function depends either on the income available after having subtracted the cost of the discrete alternative and on the free time left after having worked and travelled by each competing option. In the typical linear-in-the-attributes and in-the-parameters specification, that represents the first grade approximation of the indirect utility function, the effect of income and time constraints cancel out and only the cost and time of the alternatives matter in the comparison between them. From a microeconomic point of view this is equivalent to assume that income and time effects could be disregarded; which is not always the case. To account for these effects the utility function should include second order attributes; however, in non-linear utility functions it may not be easy to distinguish among several effects that could be relevant: direct preferences for good and leisure, and simple interactions between attributes other than income and time effects. This paper analyses these effects from a theoretical point of view focusing on the possible confounding problem in detecting income and time effects. We use a dataset collected for a modal choice context and containing both revealed and stated preference data, and estimate several NL models examining the effect of the different second-order terms on detecting income and time effects. We compared specifications including square cost and time attributes, interactions between time and cost, cost divided by the income available to be spent on free time, and time multiplied by free time. Our results confirm the strong effect of direct preferences for goods and leisure time on choice, and the potential confounding effect between quadratic attributes and other non-linear omitted terms. Finally, we also found that care should be taken in highlighting income and time effects using mixed data sources, since confounding effects can occur when non-linearities are accounted for in both data sets.     

Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.     

Response of captive lowland gorillas (Gorilla gorilla gorilla) to different housing conditions: Testing the aggression-density and coping models.

Several studies have suggested that primates react differently to spatial reduction. In this article, the authors tested some general hypotheses on primate response to spatial reduction by studying the Apenheul lowland gorillas (Gorilla gorilla gorilla; Apeldoorn, the Netherlands). The frequency of conflicts did not greatly change between the 2 housing settings, thus not supporting the density- aggression model. Indoor, gorillas performed touching behavior more often and increased their level of reconciliation. These findings support the coping model. Indoor, the gorillas also maintained broader interindividual distances by increasing the levels of sitting alone, avoidance, and dismissing behaviors. In conclusion, the Apenheul gorillas modified selectively the distribution of some patterns typical of their behavioral repertoire in response to a high-density condition. Both avoidance and coping tactics were used, thus revealing high levels of behavioral flexibility in this species. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Silver dissolution on copper-based alloys

Electrical resistivity measurements and scanning electron microscopy was used to study the dissolution of silver on Cu-Ag and Cu-Al-Ag alloys. The results seem to indicate that the dissolution temperature is affected by the addition of aluminium.     

Microstructure study of Sm,Mn-modified PbTiO3 piezoelectric ceramics by XRD profile-fitting technique

By using the X-ray diffraction profile-fitting technique, the microstructures of Sm, Mn-modified PbTiO₃ piezoelectric ceramic discs, including ferroelectric domain sizes, microstrains, and their variations with the poling strength have been quantitatively investigated. The results manifest that the modified PbTiO₃ ceramics contain a high density of domain walls due to the presence of finely-divided coherent domain structures (tens of nanometres in dimension). The poling treament can evidently influence the domain-size distribution, with a more homogeneous microstructure being developed; however, it simultaneously causes high anisotropic microstrains within the structure which, together with the high density of domain walls, is expected to be responsible for the unusual high electromechanical coupling properties possessed by this material.     

Analytical prediction of composite beams response in fire situations

In this paper an extension of the method of the Fourier series expansion to the fire analysis of composite beams is presented. In particular the extension concerns the introduction of the temperature dependent interaction of all the components: steel beams, concrete slab and steel connectors. These last are considered of finite stiffness, and a proper account is given to the combined effect of thermal degradation of the properties, and stress amplification caused by the differential thermal expansion across the interface.The proposed method compares very well with some experimental fire tests of simply supported and framed composite beams. Due to its relative simplicity and speed, it can be used for design purposes in evaluating the critical temperature in terms of critical deflection. Finally we recall that the method is capable of dealing with every type of fastening distribution, such as discontinuous or variable length.     

Structural and surface properties of thermally prepared Ti/RhxTi(1−x)Oy electrodes: I—influence of preparation parameters

Electrodes of Rh_xTi_(1−x)O_y nominal composition were prepared by thermal decomposition of the chloride or nitrate precursor salts dissolved in strongly acidic medium and applied by brush to both sides of a Ti° support. A systematic study of the influence of calcination temperature and time as well as oxygen flux was conducted. The coatings were characterised by SEM, EDAX, XRD, open circuit potential measurements and cyclic voltammetry (CV). Visible-ultraviolet spectrophotometry was employed to identify the chemical form of the precursor in solution while thermogravimetric analysis (TGA) was used to assess the decomposition temperature ranges. Optimisation of the coating preparation parameters showed coatings obtained from [Rh(H₂O)₆](NO₃)₃ precursor dissolved in HNO₃ 1:2 (v/v) and fired at 430 °C for 2 h in a 5 l min⁻¹ oxygen stream-furnished stable electrodes having the highest electrochemically active surface area.     

Thermal evolution and mechanical properties of vitreous fibres in the SiO2-Li2O-TiO2-Al2O3 system

The thermal evolution of glass fibres of the SiO₂-Li₂O-TiO₂-Al₂O₃ system has been investigated by X-ray diffraction, DTA and SEM. Within the range of the compositions investigated (2 to 10 mol % TiO₂) SEM and SAXS measurements on bulk materials have shown that a small addition of Al₂O₃ (3 mol %) does not modify the limits of the immiscibility region present in the ternary system SiO₂-LiO₂-TiO₂. Within this region TiO₂-rich droplets are more than likely to be formed. As to tensile strength, the asquenched fibres of the composition placed within the immiscibility dome give higher values than that obtained outside the liquid-liquid region and these values are higher than those measured on E-glass fibres. A slight crystallization in all the fibres leads to a continuous decrease of the initial tensile strength. With regards to the crystal phases presented by the crystallized fibres, the first exothermic peak is due to the simultaneous crystallization of-quartz (ss) and lithium disilicate whereas the second peak is due, most probably, to a-quartz (ss) -spodumene (ss) phase transformation as well as to the formation of Li₂TiSiO₅. The path of crystallization of the other detected Ti-compounds is similar to that proposed by Furukawa and White.