Abietoid seed fatty acid composition—A review of the genera Abies, Cedrus, Hesperopeuce, Keteleeria, Pseudolarix, and Tsuga and preliminary inferences on the taxonomy of Pinaceae

The seed fatty acid (FA) compositions of Abietoids (Abies, Cedrus, Hesperopeuce, Keteleeria, Pseudolarix, and Tsuga) are reviewed in the present study in conclusion to our survey of Pinaceae seed FA compositions. Many unpublished data are given. Abietoids and Pinoids (Pinus, Larix, Ficea, and Pseudotsuga)—constituting the family Pinaceae—are united by the presence of several Δ5-olefinic acids, taxoleic (5,9–18∶2), pinolenic (5,9,12–18∶3) coniferonic (5,9,12,15–18∶4), keteleeronic (5,11–20∶2), and sciadonic (5,11,14–20∶3) acids, and of 14-methyl hexadecanoic (anteiso-17∶0) acid. These acids seldom occur in angiosperm seeds. The proportions of individual Δ5-olefinic acids, however, differ between Pinoids and Abietoids. In the first group, pinolenic acid is much greater than taxoleic acid, whereas in the second group, pinolenic acid is greater than or equal to taxoleic acid. Moreover, taxoleic acid in Abietoids is much greater than taxoleic acid in Pinoids, an apparent limit between the two subfamilies being about 4.5% of that acid relative to total FA. Tsuga spp. appear to be a major exception, as their seed FA compositions are much like those of species from the Pinoid group. In this respect, Hesperopeuce mertensiana, also known as Tsuga mertensiana, has little in common with Abietoids and fits the general FA pattern of Pinoids well. Tsuga spp. and H. mertensiana, from their seed FA compositions, should perhaps be separated from the Abietoid group and their taxonomic position revised. It is suggested that a “Tsugoid” subfamily be created, with seed FA in compliance with the Pinoid pattern and other botanical and immunological criteria of the Abietoid type. All Pinaceae genera, with the exception of Pinus, are quite homogeneous when considering their overall seed FA compositions, including Δ5-olefinic acids. In all cases but one (Pinus), variations from one species to another inside a given genus are of small amplitude. Pinus spp., on the other hand, have highly variable levels of Δ5-olefinic acids in their FA compositions, particularly when sections (e.g., Cembroides vs. Pinus sections) or subsections (e.g., Flexiles and Cembrae subsections from the section Strobus) are compared, although they show qualitatively the same FA patterns characteristic of Pinoids. Multicomponent analysis of Abietoid seed FA allowed grouping of individual species into genera that coincide with the same genera otherwise characterized by more classical botanical criteria. Our studies exemplify how seed FA compositions, particularly owing to the presence of Δ5-olefinic acids, may be useful in sustaining and adding some precision to existing taxonomy of the major family of gymnosperms, Pinaceae.     

Effects of age, gender, and target location on seated reach capacity and posture

OBJECTIVE: The aim of this study was to investigate the effects of age, gender, and target location upon arm reach capacity and posture. BACKGROUND: The older adult population is growing in number. Their specific needs must be better understood to improve the design of work and life spaces. METHOD: Thirty-eight adults, divided into four groups according to their gender and age, participated in the experiment. They were asked to reach 84 targets located in a large space defined according to their anthropometry and reach capacities. Reach capacities and postures were analyzed. RESULTS: On average, older participants showed shorter maximal reach distances (by 4.8% of upper limb length) as compared with younger participants. No gender difference was found for maximum reach distance. Age also had significant effects on reach posture, especially through its interactions with target azimuth. Older participants tended to use their trunk less whenever possible. Reduced neck and trunk/seat axial rotations were observed for the older participants when the target deviated from the sagittal plane. They compensated by a greater rotation of the pelvis with respect to the seat. CONCLUSION: Older people's reach capacities should be taken as references, rather than those of younger people, in order to accommodate a wider range of the population. APPLICATION: These results can be used to improve the arrangement of living spaces and work spaces for older people.     

Identification of the Primary Factors Determining the Specificity of Human VKORC1 Recognition by Thioredoxin-Fold Proteins

Redox (reduction–oxidation) reactions control many important biological processes in all organisms, both prokaryotes and eukaryotes. This reaction is usually accomplished by canonical disulphide-based pathways involving a donor enzyme that reduces the oxidised cysteine residues of a target protein, resulting in the cleavage of its disulphide bonds. Focusing on human vitamin K epoxide reductase (hVKORC1) as a target and on four redoxins (protein disulphide isomerase (PDI), endoplasmic reticulum oxidoreductase (ERp18), thioredoxin-related transmembrane protein 1 (Tmx1) and thioredoxin-related transmembrane protein 4 (Tmx4)) as the most probable reducers of VKORC1, a comparative in-silico analysis that concentrates on the similarity and divergence of redoxins in their sequence, secondary and tertiary structure, dynamics, intraprotein interactions and composition of the surface exposed to the target is provided. Similarly, hVKORC1 is analysed in its native state, where two pairs of cysteine residues are covalently linked, forming two disulphide bridges, as a target for Trx-fold proteins. Such analysis is used to derive the putative recognition/binding sites on each isolated protein, and PDI is suggested as the most probable hVKORC1 partner. By probing the alternative orientation of PDI with respect to hVKORC1, the functionally related noncovalent complex formed by hVKORC1 and PDI was found, which is proposed to be a first precursor to probe thiol–disulphide exchange reactions between PDI and hVKORC1.     

Dynamic capacity of desiccants based on modified alumina at elevated pressures

Alumina desiccants obtained by extrusion molding of plastic pastes based on pseudoboehmite or bayerite-containing hydroxides including those modified by sodium and potassium ions were studied. The hydroxides were synthesized by hydration of the product of centrifugal thermal activation of gibbsite under mild conditions. The physicochemical and structural-mechanical properties of the desiccants (fresh and after nine adsorption–regeneration cycles) were studied. The dynamic capacity was determined at a pressure of 3MPa under conditions designed to model the industrial conditions. The sample obtained from bayeritecontaining hydroxide had a higher dynamic capacity than the sample obtained from pseudoboehmite-containing hydroxide at close texture and strength characteristics of adsorbents. Modification of the samples obtained from pseudoboehmite-containing hydroxide with potassium and sodium ions leads to decreased granule stability and increased volume, average pore size, and dynamic capacity. The potassium-modified sample of the desiccant had dynamic capacity as high as that of the sample obtained from bayerite-containing hydroxide at low load. After the cyclic tests, the phase composition, alkaline impurity contents, specific surface area, and crushing strength of the samples did not change within the error of determination. It was found that the prepared desiccants were highly stable in many adsorption–desorption cycles and the minimum dew point of –80°C could be reached during the drying.     

Transient and steady states of Gd2Zr2O7 and 2ZrO2∙Y2O3 (ss) interactions with calcium magnesium aluminium silicates

Reactions between calcium magnesium aluminium silicates (CMAS) and Gd₂Zr₂O₇ or 2ZrO₂?Y₂O₃ (ss) are investigated within a temperature range of 1200–1300 °C and for durations of 1 h–100 h. The evolution of CMAS penetration depth in Gd₂Zr₂O₇ and 2ZrO₂?Y₂O₃ (ss) pellets varies considerably depending on the interaction time. A quantitative analysis of the nature and composition of phases observed in stationary conditions (powder/powder interaction) is performed by SEM-FEG coupled with WDS analyses using micro-agglomerated nanoparticles of Gd₂Zr₂O₇ and 2ZrO₂?Y₂O₃. Faster kinetics of the gadolinium-based system are illustrated through an analysis of the morphology of the reaction area and of the resulting CMAS tightness of reaction products. The compositions and quantities of reaction products observed at equilibrium are very similar for the two systems, but transient states are significantly different.     

Optimization of the spark plasma sintering processing parameters affecting the properties of polyimide

The present study deals with the optimization of polyimide (PI) mechanical properties, obtained by Spark Plasma Sintering (SPS), by using a method combining Design of Experiments (DOE) with physical, structural, and mechanical characterizations. The effects of SPS parameters such as temperature, pressure, dwell time, and cooling rate on the density, mechanical properties, and structure of PI were investigated. The experimental results revealed that the mechanical properties of the material were optimized by raising the sintering temperature up to 350°C. The optimized SPS processing parameters were a temperature of 350°C, a pressure of 40 MPa, and a dwell time of 5 min. Under these conditions, a relative density of 99.6% was reached within only a few minutes. The corresponding mechanical properties consisted of Young's modulus of 3.43 GPa, a Shore D hardness of 87.3, and a compressive strength of 738 MPa for a maximum compressive strain of 61.8%. Moreover, when working at 320°C and at 100 MPa, an increase in the dwell time was necessary to enhance the properties. Contrary to the other parameters, the cooling rate appeared to be a non‐significant parameter. Finally, correlations between the PI structure and the mechanical properties were made to demonstrate the densification mechanisms. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41542.     

Replication-Deficient Lymphocytic Choriomeningitis Virus-Vectored Vaccine Candidate for the Induction of T Cell Immunity against Mycobacterium tuberculosis

Mycobacterium tuberculosis (Mtb) represents a major burden to global health, and refined vaccines are needed. Replication-deficient lymphocytic choriomeningitis virus (rLCMV)-based vaccine vectors against cytomegalovirus have proven safe for human use and elicited robust T cell responses in a large proportion of vaccine recipients. Here, we developed an rLCMV vaccine expressing the Mtb antigens TB10.4 and Ag85B. In mice, rLCMV elicited high frequencies of polyfunctional Mtb-specific CD8 and CD4 T cell responses. CD8 but not CD4 T cells were efficiently boosted upon vector re-vaccination. High-frequency responses were also observed in neonatally vaccinated mice, and co-administration of rLCMV with Expanded Program of Immunization (EPI) vaccines did not result in substantial reciprocal interference. Importantly, rLCMV immunization significantly reduced the lung Mtb burden upon aerosol challenge, resulting in improved lung ventilation. Protection was associated with increased CD8 T cell recruitment but reduced CD4 T cell infiltration upon Mtb challenge. When combining rLCMV with BCG vaccination in a heterologous prime-boost regimen, responses to the rLCMV-encoded Mtb antigens were further augmented, but protection was not significantly different from rLCMV or BCG vaccination alone. This work suggests that rLCMV may show utility for neonatal and/or adult vaccination efforts against pulmonary tuberculosis.     

Molecular Networking for Drug Toxicities Studies: The Case of Hydroxychloroquine in COVID-19 Patients

Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ.     

Temperature stability of a pure metakaolin based K-geopolymer: Part 2. Variations in the mesoporous network and its rehydration stability

The thermal behavior of a model MK-based K-geopolymer was investigated between room temperature and 1400°C in order to evaluate its potentiality for high-temperature applications. The purpose of our study was to monitor the behavior of a geopolymer during a temperature rise in order to better understand its variations with respect to temperature. The works from the present paper focus only changes in the porous network; it follows a first part devoted to variations in the mineral matrix. The results obtained here show that the geopolymer material preserves its porous integrity up to 800°C, while maintaining the reversibility of water exchanges corresponding to about 25 weight percent. Together with the results of part 1, the findings of this study allow us to affirm that geopolymer materials are only very little affected by temperatures up to 800°C, or even 900°C (keeping its mesoporous amorphous structure).