Structural and Magnetic Properties of La<Subscript>2/3</Subscript>Sr<Subscript>1/3</Subscript>MnO<Subscript>3</Subscript>/SrTiO<Subscript>3</Subscript>/CoFe<Subscript>2</Subscript> Hard-Soft Magnetic Systems

We report on the growth and magnetic properties of La_2/3Sr_1/3MnO₃/SrTiO₃/CoFe₂ hard-soft magnetic systems prepared by pulsed laser deposition on SrTiO₃(001) substrates. In situ reflection high-energy electron diffraction along the [100]SrTiO₃ substrate azimuth and atomic force microscopy measurements reveal that La_2/3Sr_1/3MnO₃ and SrTiO₃ grow both in a three dimensional mode and that the roughness of the lower and upper magnetic/non-magnetic interfaces ranges between 2 and 4 Å. Cross-section transmission electron microscopy observations show that the layers are continuous, with an homogeneous thickness, and that the interfaces are mostly sharp and correlated. The magnetization curves show a two step reversal of the magnetization, with very distinct coercive fields. A small anisotropy is observed for the CoFe₂ layer with an in plane easy magnetization axis along the [110]SrTiO₃ direction. Minor magnetization loops indicate that the coupling between the magnetic layers is negligible.     

Synthesis,Thermal Properties and Electrical Conductivity of Na-Sialate Geopolymer

This work aims to study the thermal behavior of basic-geopolymers derived from metakaolin (clay). The geopolymers were characterized by different techniques: thermal analysis (DTA, TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and impedance spectroscopy. Some physicochemical properties of the products were also determined: the phases obtained after geopolymer heat treatment and their electrical properties. The results obtained after drying and heat treatment showed that the products kept their initial shapes, but revealed variable colors depending on the temperatures at which they were treated. The products obtained are amorphous between 300 up to 600 °C with peaks relating to the presence of nanocrystallites of muscovites and zeolite, thus at 900 °C it is quite amorphous but only contains nanocrystallites of muscovites. From the temperature of 950 °C, we notice that the geopolymer has been transformed into a crystalline compound predominated by the Nepheline (NaAlSiO₄) with the presence of a crystalline phase by minor peaks of Muscovite, this crystalline character has been increased at 1100 °C to obtain a whole phase crystalline of a Nepheline. The treatment of this geopolymer for one hour at 1200 °C shows an amorphous phase again corresponding to corundum (α-Al₂O₃). This indicates that the dissolution of the grains by the liquid phase induces the conversion of the material structure from sialate [–Si–O–Al–O] to sialate siloxo [–Si–O–Al–O–Si–O–] and the formation of a new crystalline phase (α-Al₂O₃). This development of sialate to sialate-siloxo was confirmed by IR spectroscopy. As mentioned above, from 300 to 900 °C, Na-sialate geopolymer exhibits the same disorder structure of nepheline. The crystal structure of nepheline is characterized by layers of six-membered tetrahedral rings of exclusively oval conformation. The rings are built by Regularly alternating tetrahedral AlO₄ and SiO₄. Stacking the layer’s parallel to the c axis gives a three-dimensional network containing channels occupied by Na cations. This topology favors easy movement of Na⁺ ions throughout the structure. For this reason, ionic migration in nepheline is widely reported. The refinement of Na-Sialate geopolymer at room temperature gives bulk high ionic conductivity of about 5 × 10^?5 S cm^?1 and this is due to the probable joint contribution of H⁺ and Na⁺ ions. Above 200 °C, Na⁺ seems to remain the only charge carrier with a low activation energy of about Ea?=?0.26 eV. At higher temperatures, the characteristic frequencies become so close that it is impossible to distinguish the contributions. A total resistance comprising both grain and grain boundaries contribution is then determined.

     

Advanced numerical methods for thermalhydraulics

New applications have been found for advanced best estimate codes, due to the needs for industrial studies and safety studies, and due also to the appearance of new generations of computers, such as powerful work stations. Thus developments have been focused on the optimization of the numerical performance of thermal-hydraulics codes based on the two-fluid six equation model.One important goal is that of minimizing the computing time. Comparisons of existing methods demonstrate that a fully implicit scheme is well suitable for optimization.A second field of investigation is to develop powerful three-dimensional modules with advanced numerical methods, as multistep method, conjugate gradient method for the solver and, in future, non-structured meshing.     

Isolation and molecular cloning of a novel type 2 ribosome-inactivating protein with an inactive B chain from elderberry (Sambucus nigra) bark

One of the predominant proteins in the bark of elderberry (Sambucus nigra) has been identified as a novel type 2 ribosome-inactivating protein that exhibits a normal RNA N-glycosidase activity, but is devoid of carbohydrate binding activity. Sequence analysis of the corresponding cDNA clones revealed a striking homology to the previously cloned bark lectins from elderberry, suggesting that the new protein is a lectin-related protein. Molecular modeling of the protein confirmed that its A chain is fully active, whereas its B chain contains two functionally inactive carbohydrate-binding sites. These findings not only demonstrate for the first time the occurrence of a type 2 ribosome-inactivating protein with an inactive B chain, but also offer interesting perspectives for the synthesis of immunotoxins with an improved selectivity.     

ASSIMILABLE NITROGEN ADDITION AND HEXOSE TRANSPORT SYSTEM ACTIVITY DURING ENOLOGICAL FERMENTATION

Addition of ammoniacal nitrogen to nitrogen-limited musts is widely used by enologists to reduce the time required for the completion of fermentation. Nevertheless the physiological basis of the actual effect of such an addition is not fully understood. The effect of ammoniacal addition was studied on a nitrogen-limited must under conditions whereby addition had no effect on yeast growth. In these conditions nitrogen addition promotes increase of protein synthesis rate and activity of the hexose transport system. The results suggest that the reactivation of the hexose transport system does not require a de novo biosynthesis of sugar carriers, but the synthesis of an unknown regulatory protein.     

Effect of the inoculum size on Listeria monocytogenes growth in structured media

Obtaining quantitative data concerning the relative impact of various factors that may influence bacterial growth is of great importance for microbial risk assessment and predictive microbiology. The objective of this work was to investigate the effect of the initial Listeria monocytogenes density on all the growth parameters of this pathogen (lag phase duration, growth rate and maximum population density attained) on a sterile solid model system mimicking smoked fishery products, and in real cold-smoked salmon, a product likely to be contaminated with L. monocytogenes. Growth of the pathogen was monitored using a sensitive enumeration method, recently developed, based on membrane filtration followed by the transfer of the filter on a selective media [Gnanou Besse, N., Audinet, N., Beaufort, A., Colin, P., Cornu, M. and Lombard, B., 2004. A contribution to the improvement of Listeria monocytogenes enumeration in smoked salmon. International Journal of Food Microbiology, 91, 119-127.]. Depending on the experimental conditions, we found a significant effect of the inoculum size, both on lag phase duration, and on the maximal population attained. Moreover, the effect of the inoculum size on the growth of L. monocytogenes was dependent on a complex set of interactions. Factors which have appeared to impact on this effect include the cells physiological state, the background microflora, the texture of the media and the packaging system. It is important to understand how these interactions affect the growth of Listeria in order to predict and control its development in food.     

High dose flaxseed oil supplementation may affect fasting blood serum glucose management in human type 2 diabetics

Type 2 diabetes is characterized partially by elevated fasting blood serum glucose and insulin concentrations and the percentage of hemoglobin as HbA1c. It was hypothesized that each of blood glucose and its co-factors insulin and HbA1c and would show a more favorable profile as the result of flaxseed oil supplementation. Patients were recruited at random from a population pool responding to a recruitment advertisement in the local newspaper and 2 area physicians. Completing the trial were 10 flaxseed oil males, 8 flaxseed oil females, 8 safflower (placebo) oil males and 6 safflower oil females. Patients visited on two pre-treatment occasions each three months apart (visits 1 and 2). At visit 2 subjects were randomly assigned in double blind fashion and in equal gender numbers to take flaxseed oil or safflower oil for three further months until visit 3. Oil consumption in both groups was approximately 10 g/d. ALA intake in the intervention group was approximately 5.5 g/d. Power was 0.80 to see a difference of 1 mmol of glucose /L using 12 subjects per group with a p < 0.05. Flaxseed oil had no impact on fasting blood serum glucose, insulin or HbA1c levels. It is concluded that high doses of flaxseed oil have no effect on glycemic control in type 2 diabetics.