Poly(vinyl pyrrolidone)—C70 complexes in aqueous solutions

Aqueous solutions of poly(vinyl pyrrolidone)-fullerene complexes (PVP-C₇₀) have been studied using static and dynamic light scattering methods. Two diffusive processes were detected. The slow diffusion was interpreted as dynamics of large intermolecular PVP-C₇₀ complexes while the fast diffusion was associated with the presence of individual PVP molecules in solution. It was also shown that the molecular weights and dimensions of PVP-C₇₀ complexes are smaller than for PVP-C₆₀ by a factor of 2.5-3. In aqueous solutions of PVP-C₇₀ complex the depolarization and dissymmetry of scattered light were observed in contrast to PVP-C₆₀ solutions. It reveals the existence of anisotropic structures in PVP-C₇₀ solutions. Intermolecular interactions within PVP-C₇₀ complexes are weak and a hydrodynamic field can destroy complexes.     

2,4,6‐Trichlorophenol and phenol removal in methanogenic and partially‐aerated methanogenic conditions in a fluidized bed bioreactor

A fluidized bed bioreactor (FBBR) was operated for more than 575 days to remove 2,4,6‐trichlorophenol (TCP) and phenol (Phe) from a synthetic toxic wastewater containing 80 mg L^?1 of TCP and 20 mg L^?1 of Phe under two regimes: Methanogenic (M) and Partially‐Aerated Methanogenic (PAM). The mesophilic, laboratory‐scale FBBR consisted of a glass column (3 L capacity) loaded with 1 L of 1 mm diameter granular activated carbon colonized by an anaerobic consortium. Sucrose (1 g COD L^?1) was used as co‐substrate in the two conditions. The hydraulic residence time was kept constant at 1 day. Both conditions showed similar TCP and Phe removal (99.9 + %); nevertheless, in the Methanogenic regime, the accumulation of 4‐chlorophenol (4CP) up to 16 mg L^?1 and phenol up to 4 mg L^?1 was observed, whereas in PAM conditions 4CP and other intermediates were not detected. The specific methanogenic activity of biomass decreased from 1.01 ± 0.14 in M conditions to 0.19 ± 0.06 mmolCH₄ h^?1 gTKN^?1 in PAM conditions whereas the specific oxygen uptake rate increased from 0.039 ± 0.008 in M conditions to 0.054 ± 0.012 mmolO₂ h^?1 gTKN^?1, which suggested the co‐existence of both methanogenic archaea and aerobic bacteria in the undefined consortium. The advantage of the PAM condition over the M regime is that it provides for the thorough removal of less‐substituted chlorophenols produced by the reductive dehalogenation of TCP rather than the removal of the parent compound itself. Copyright © 2005 Society of Chemical Industry     

The effect of test variables and extrusion conditions on heat deflection temperature of PVC

It is commonly expected that the heat deflection temperature of finished plastic products will match the values, reported by the material supplier. However, in practice, a significant deviation from the published data is frequently observed. This paper gives insight into the reasons for such a discrepancy. It presents information on the effect of the test variables, such as load, sample conditioning, sample flatness and extrusion conditions, such as: melt temperature and draw-down (internal stresses), on heat deflection temperature of rigid PVC.     

Synthesis and characterization of polyurea microcapsules containing essential oils with antigerminative activity

In this paper we report on the preparation and characterization of polyurea‐based microencapsulated systems, containing essential oils as core materials, for potential applications in controlled‐release formulations of agrochemicals. Microcapsules were synthesized by interfacial polymerization in o/w emulsion between polyfunctional isocyanates and diamines, to investigate the effect of the monomer kind on the morphology and properties of the produced samples. The synthetic conditions that gave the best results were used to microencapsulate four essential oils, able to interfere with the seed germination and radicle elongation of some test plants. The produced samples were characterized, with the aim to analyze their morphology and to verify the effectiveness of essential oil microencapsulation. Moreover, preliminary bioassay based on seed germination and subsequent radical growth were carried out to study the effects of the microencapsulated essential oils. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

追求影像臻于完美

Nick Lee澳籍华人,有十余年的广告创意经验,曾担任过跨国传媒广告机构的创意总监等工作,同时为多家中国企业客户和众多跨国企业提供过成功的服务及案例.现创立一支精锐的团队REDFLAG STUDIO(商艺广告传播)于上海,有志借助这个平台,不仅为客户提供高品质的实视化作品,而且希望能够为中国的"创意视觉经济"的发展助力.     

Die design for rigid PVC—the effect of die land length on extrudate swell

PVC profile extrusion compounds have a unique morphology. While other polymers gradually decrease in extrusion die swell with increasing length/thickness (L/D) ratio, PVC profile extrusion compounds have a low die swell, quite independent of the die's L/D ratio in the range of 5 to 20. The fact that the die land length can be changed without changing the extrudate swell is an important consideration, which makes die design and balancing dies simpler and easier for PVC profile extrusion compounds. While other polymers substantially increase extrudate swell with increased shear rate, the swell of the PVC profile compounds is not much affected by shear or extrusion rate. This unique behavior allows wider processing latitude in profile extrusion and faster extrusion rates than with other polymers. Another unique factor in the rheology of PVC profile extrusion compounds is that extrusion die swell increases with increasing melt temperature, while other polymers have decreasing die swell with increasing melt temperature. The unusual rheology of PVC profile extrusion compounds is attributed to its unique melt morphology, where the melt flow units are 1 um bundles and molecules that have low surface to surface interaction and entanglement at low processing temperatures but increased melting and increased entanglement at higher processing temperatures. Other polymers, unlike PVC, have melt flow at the molecular level.     

Integrating intelligent job-scheduling into a real-world production-scheduling system

The paper addresses the problem of scheduling production orders (jobs). First, an approach based on simulated annealing and Hopfield nets is described. Since performance was unsatisfactory for real-world applications, we changed the problem representation and tuned the scheduling method, dropping features of the Hopfield net and retaining simulated annealing. Both computing time and solution quality were significantly improved. The scheduling method was then integrated into a software system for short-term production planning and control (electronic leitstand). The paper describes how real-world requirements are met, and how the scheduling method interacts with the leitstand's database and graphical representation of schedules.     

A residualizing semantics for the partial evaluation of functional logic programs

Recent proposals for multi-paradigm declarative programming combine the most important features of functional, logic and concurrent programming into a single framework. The operational semantics of these languages is usually based on a combination of narrowing and residuation. In this paper, we introduce a non-standard, residualizing semantics for multi-paradigm declarative programs and prove its equivalence with a standard operational semantics. Our residualizing semantics is particularly relevant within the area of program transformation where it is useful, e.g., to perform computations during partial evaluation. Thus, the proof of equivalence is a crucial result to demonstrate the correctness of (existing) partial evaluation schemes.     

Adjusting Some Properties of Poly(methacrylic acid) (Nano)Composite Hydrogels by Means of Silicon-Containing Inorganic Fillers

The present work aims to show how the main properties of poly(methacrylic acid) (PMAA) hydrogels can be engineered by means of several silicon-based fillers (Laponite XLS/XLG, montmorillonite (Mt), pyrogenic silica (PS)) employed at 10 wt% concentration based on MAA. Various techniques (FT-IR, XRD, TGA, SEM, TEM, DLS, rheological measurements, UV-VIS) were used to comparatively study the effect of these fillers, in correlation with their characteristics, upon the structure and swelling, viscoelastic, and water decontamination properties of (nano)composite hydrogels. The experiments demonstrated that the nanocomposite hydrogel morphology was dictated by the way the filler particles dispersed in water. The equilibrium swelling degree (SDe) depended on both the pH of the environment and the filler nature. At pH 1.2, a slight crosslinking effect of the fillers was evidenced, increasing in the order Mt < Laponite < PS. At pH > pKa_MAA (pH 5.4; 7.4; 9.5), the Laponite/Mt-containing hydrogels displayed a higher SDe as compared to the neat one, while at pH 7.4/9.5 the PS-filled hydrogels surprisingly displayed the highest SDe. Rheological measurements on as-prepared hydrogels showed that the filler addition improved the mechanical properties. After equilibrium swelling at pH 5.4, G’ and G” depended on the filler, the Laponite-reinforced hydrogels proving to be the strongest. The (nano)composite hydrogels synthesized displayed filler-dependent absorption properties of two cationic dyes used as model water pollutants, Laponite XLS-reinforced hydrogel demonstrating both the highest absorption rate and absorption capacity. Besides wastewater purification, the (nano)composite hydrogels described here may also find applications in the pharmaceutical field as devices for the controlled release of drugs.